• Korean Journal of Acupuncture
• /
• v.40 no.4
• /
• pp.156-168
• /
• 2023

Objectives : This study aimed to determine the status of thermal stimulation devices approved in Korea for medical applications over the past 10 years, and based on this, to obtain insight for future thermal treatment in Korean medical institutions. Methods : We searched the item classification list entitled "Regulations on Medical Device Items and Rating by Item" from the Ministry of Food and Drug Safety Notice No. 2021-24, 2021 (Enforced March 19, 2021; www.mfds.go.kr) for individually licensed heaters using the terms "heat" and "heating". Results : We identified 17 items of thermal stimulation product group, of which 1,308 devices were licensed by February 4, 2022, and 53.2% of them (n=696) were devices with valid permits for distribution in Korea. Among the licensed devices, heating pad systems under/overlay (electric, home use) were approved the most, but combinational stimulator (for medical use, home use; Grade 2) accounted for the highest percentage among the current valid permission. Moxibustion apparatuses were licensed separately for electrical use and non-electrical use, and occupied a low percentage of the total devices. We analyzed 307 devices that were accompanied by technical documents and found that the heat sources were wires in 145 (47.2%), infrared rays in 44 (14.3%) and ultrasonic waves in 42 (13.7%) devices. Most (83.1%) devices were used for pain relief, while other applications included beauty, cancer treatment, maintenance of infant body temperature, and healing fractures. Conclusions : Thermal stimulation devices accounted for about 0.9% of all medical devices, and among them, combinational stimulators and heating pad systems under/overlay had the most valid permits. Thermal stimulation devices using heating wires and infrared rays were the most prevalent, and most were used to relieve pain. In order to develop a range of thermal stimulation devices that can be utilized in Korean medical institutions, it is imperative that they have potential applications beyond pain management, addressing various medical purposes. To achieve this, foundational research is necessary to effectively apply diverse heat sources based on medical objectives.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.906-915
• /
• 2022

The purpose of this study was to investigate the effects of aquatic walking exercise on body composition, hs-CRP, HOMA-IR, and blood pressure in obese elderly women. Twenty, obese elderly women[percent body fat(%BF) < 30%] composed of aquatic walking exercise group(EX, n=10), the control group(CON, n=10). The variables of body composition, hs-CRP, HOMA-IR, and blood pressure were measured in all the subjects pre and post of 12 weeks aquatic walking exercise(RPE 11-14, 3 times per week, 50 mins). The test data were analyzed by paired t-test and repeated ANOVA, and the alpha level of p<.05 was set for all tests of significance. %BF (p<.05), insulin (p<.01), HOMA-IR (p<.01) and SBP (p<.05) were significantly decreased in EX group compared to CON group. These results suggest that 12 weeks of aquatic walking exercise improves %BF, HOMA-IR, and blood pressure. Thus, this proposed aquatic walking exercise modality can be a useful therapy to improve both obese and cardiovascular disease in obese elderly women.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.875-883
• /
• 2022

This study was to investigate the antioxidant and anti-inflammatory activity of leaf and stem of Artemisia annua L. extract by hot water and 70% ethanol. The total polyphenol content was significantly higher in the 70% ethanol extract of Artemisia annua L. than in the hot water extract, but there was no significant difference in the total flavonoid content between the hot water extract and the 70% ethanol extract. The DPPH radical and ABTS radical scavenging ability was the highest in the vitamin C treatment group at the concentration of 62.5~500 ㎍/mL, followed by the 70% ethanol extract and the hot water extract. As a result of measuring the NO production inhibitory effect at 125 ~ 500 ㎍/mL, the hot water extract showed strong NO production inhibition at the concentration of 500 ㎍/mL, and showed the inhibition of NO production with concentration-dependent pattern. In addition to inhibitory activity of NP production, the 70% ethanol extract also showed an inhibitory effect on inflammatory cytokines production. It is thought that it can be widely used in the treatment and improvement of inflammatory diseases because it shows antioxidant effects and significantly reduces the expression of inflammatory cytokines.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.1-11
• /
• 2023

Breast cancer is the disease that affects women the most worldwide. Due to the development of computer technology, the efficiency of machine learning has increased, and thus plays an important role in cancer detection and diagnosis. Deep learning is a field of machine learning technology based on an artificial neural network, and its performance has been rapidly improved in recent years, and its application range is expanding. In this paper, we propose a DNN-SVM hybrid model that combines the structure of a deep neural network (DNN) based on transfer learning and a support vector machine (SVM) for breast cancer classification. The transfer learning-based proposed model is effective for small training data, has a fast learning speed, and can improve model performance by combining all the advantages of a single model, that is, DNN and SVM. To evaluate the performance of the proposed DNN-SVM Hybrid model, the performance test results with WOBC and WDBC breast cancer data provided by the UCI machine learning repository showed that the proposed model is superior to single models such as logistic regression, DNN, and SVM, and ensemble models such as random forest in various performance measures.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.65-65
• /
• 2020

Bakanae disease, caused by Gibberella fujikuroi, is one of the most devastating diseases threatening rice production in Korea. In recent years, the incidence of bakanae disease became alarming due to the mechanical transplanting practice where the spread of bakanae can be amplified during accelerating seeds growth, due to the use of seeding boxes. The development of resistant rice cultivars could be the primary and effective method for controlling bakanae disease. However, the effects of individual resistance genes are relatively small. Therefore, pyramiding of bakane R genes in rice breeding is a promising strategy having a high potential to mitigate the advert effects of bakanae disease. This study employed a gene pyramiding approach to develop bakanae disease resistant rice lines carrying qBK1, qFfR1 introduced from rice line MY299BK and cv. Nampyeong, respectively. The MY299BK carries qBK1 introduced from cv. Shingwang, which was found to have a high resistance compare to Nampyeong. In addition, the pyramiding effect of the qBK1 and qFfR1 resistance genes were investigated, and the presence or absence of these genes helped us investigate their interaction through bioassay method and MAS. Furthermore, the distribution of resistance in the population showed a biased distribution toward resistance in the F6:7 populutions. However, we could not confirm the accumulation effect of the resistance gene, but the difference between the two genes by the SN2 marker was confirmed. Therefore, the qBK1 gene harbored by MY299BK appears to be different from the qFfR1 carried by Nampyeong, suspected to possess a different bakanae disease resistant gene different from those found in MY299BK and Nampyeong.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.37-37
• /
• 2021

Calystegia soldanella L. is a perennial herbaceous halophyte belonging to the convolvulaceae family, which mainly grows in coastal sand dunes in Korea. Shoots and rhizomes are edible, and roots called 'Hyoseon Chogeun' are known to have medicinal effects such as antipyretic, sterilization, and diuretic. In addition, physiological activities of antioxidant, anti-inflammatory, antiviral, antifungal and PTP-1B (protein tyrosine phosphate-1B) inhibition have been reported. In this study, in vitro induction cell lines of C. soldanella L. collected from the coastal sand dunes in Jeju island was redifferentiated into adventitious roots that can be used as medicinal resources. Also the biomass of mass-proliferated adventitious roots using a bioreactor were evaluated. Plants of C. soldanella L. were collected from the crevice of the seashore in the coastal area of Taeheung 2-ri, Namwon-eup, Seogwipo-si. Then, it was separated into leaves, stems, rhizomes, and roots, and surface sterilized with 70% ethyl alcohol and 2% NaOCl (sodium hypochlorite). After washing with sterilized water, each organ section was cultured in Hormone-free MS medium (Murashige & Skoog Medium). As a result, the induction response rates were evaluated at 85% and 55%, respectively, in terms of callus formation and shoot generation in the rhizome segment. In the case of the adventitious roots morphological characteristics induced by single-use treatment of auxin-based plant growth regulators IBA and NAA from redifferentiated shoots were compared. Most efficient adventitious root culture method as a rooting rate, number, length, and biomass proliferation in the bioreactor system was confirmed when treated by culturing in MS salts, Sucrose 30 g·L^-1, and IBA 1mg·L^-1 for 4 weeks. In this study, the medium composition and culture period were confirmed using a bioreactor system to mass-proliferate adventitious roots derived from C. soldanella L. in Jeju island. Also this adventitious root line developed a new medicinal material could increase value of the bio-industry ingredient through quantitative and qualitative screening of phyto-bioactive compounds.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.993-1000
• /
• 2023

Recently, enviromentally friendly natural substances derived from plants have been attracting attention as cosmetic materials, and research on various physiological activities of natural substances is being actively conducted. This study investigated the antioxidant, anti-inflammatory, moisturizing, and antibacterial effects of three types of extracts of mixtures containing different mixing ratios, Polygala tenuifolia, Angelica dahurica, and Elsholtzia splendens, known to have various physiological activities. The mixing ratio is 7 conditions (M1, 1:1:1; M2, 0.5:1.5:1; M3, 1.5:0.5:1; M4, 0.1:0.95:0.95; M5, 0.5:0.5:2; M6, 0.95 :1.95:0.1; M7, 1.45:0.1:1.45), and the optimal mixing ratio was confirmed for use as a cosmetic material. DPPH and ABTS radical scavenging activities showed scavenging abilities of 75.37% and 99.19%, respectively, at 1,000 ㎍/mL of M6. At a concentration of 200 ㎍/mL of M6, it showed 50% of nitric oxide production inhibition compared to the lipopolysaccharide-treated that induced an inflammatory response. It was confirmed that M3 and M6 produced hyaluronic acid 1.47 and 1.49 times higher than the control at a concentration of 50 ㎍/mL, respectively. Through the disc diffiusion test, the clear zone was 9.75 mm at 8 ㎍/mL of M6, confirming the inhibition of growth of staplylococcus aureus strain. Based on the above results, it is believed that the mixed extract of Polygala tenuifolia, Angelica dahurica, and Elsholtzia splendens can be used as a functional natural material for cosmetics.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.988-1000
• /
• 2023

Hesperetin(HT) is a potent antioxidant flavonoid aglycone derived from hesperidin(HD). The antioxidant, anti-inflammatory, and antimicrobial activities of HT and its cyclodextrin(CD) inclusion complexes were compared in vitro. HT was prepared by enzymatic hydrolysis of HD, and HT/CD complexes were prepared using 𝛽-cyclodextrin(𝛽-CD) and hydroxypropyl-𝛽-cyclodextrin(HP-𝛽-CD) by solvent co-evaporation method. The solubility of the HT/HP-𝛽-CD inclusion complex increased 93.5-fold compared to HT, and the solubility of HT/𝛽-CD increased 22.5-fold. The HT/HP-𝛽-CD inclusion complex showed a similar effect as HT on radical scavenging activity in antioxidant assays, whereas the HT/𝛽-CD inclusion complex showed slightly lower activity than HT. Cytotoxicity was low in the following order; HT/HP-𝛽-CD, HT/𝛽-CD, and HT in murine macrophage RAW264.7 cells. Treatment with HT and HT/CD inclusion complexes reduced the levels of inflammatory mediators such as nitric oxide(NO), tumor necrosis factor-𝛼(TNF-𝛼) and interleukin-6(IL-6) in the cells. HT and HT/HP-𝛽-CD inclusion complex were more effective than HT/𝛽-CD inclusion complex at relatively low concentrations. Inhibitory effects were tested on skin-pathogenic bacteria, Staphylococcus aureus and Pseudomonas aeruginosa, and they showed an antimicrobial effect on S. aureus in the order of HT = HT/HP-𝛽-CD > HT/𝛽-CD, but they did not show any significant inhibitory effect on P. aeruginosa. In conclusion, HT, the aglycone form of HD, and its CD inclusion complexes showed various biological activities. HT/HP-𝛽-CD inclusion complex, which is the highly soluble form of HT, showed relatively higher activity compared to HT/𝛽-CD inclusion complex.

• Korean Journal of Ecology and Environment
• /
• v.56 no.3
• /
• pp.229-241
• /
• 2023

Microphysogobio rapidus is designated as endangered species class I by Ministry of Environment, and its distribution and population have been gradually declining, and it is now limited to the Nam River and some tributary streams of the Nakdong River Watershed. For the restoration of this highly endangered species, it is important to identify the causes of the decline and establish appropriate restoration plans. However, due to lack of basic data and ecological research, most steps are stagnant. Therefore, in this study, we identified the differences in the physical, biological, and sociological habitats between current and past distributed sites through field surveys and literature reviews. As a result of the field survey, there were differences in conductivity between the current and past distributed sites, and fish communities were also showed differences. The literature data also showed that the physico-chemical values of the past distributed sites were generally unfavorable, which generated negative consequences on biological factors. In particular, the effects of urbanization were found to be a major factor affecting the habitat of M. rapidus. Habitat stabilization is crucial for the recovery of this endangered species. However, in the past distributed sites, disturbances such as stream development and weir construction have altered streams physico-chemically and result in changes of M. rapidus. Therefore, a comprehensive plan that considers both stream connectivity and water quality is needed to manage and restore the habitat of M. rapidus.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.