• 한국CDE학회논문집
• /
• 제20권1호
• /
• pp.11-21
• /
• 2015

Currently, the United States, the United Kingdom, Australia etc. are actively utilizing energy simulation for efficiency evaluation of building energy. However, domestic energy efficiency assessment system doesn't use energy simulation system properly at present: parameters based architecture plans and Ashrae Standard are inputted for the evaluation, because the input parameters for the simulation haven't been established yet. This fact causes poor reliability during energy simulation, as the values of the two standards are different from each other. Therefore, the aim of the study is to set domestic standard parameter for BIM-based energy performance evaluation, focusing on possession area per person of occupants at government office in Korea. We found that the difference among the result values occurred approximately 3% in the energy simulation. As a result of the analysis, possession area per person of occupants in Government office is $31.87m^2$. Other input parameters may be set based on this. This will increase the reliability of energy simulation through a domestic standard parameter.

• 한국조경학회지
• /
• 제45권1호
• /
• pp.52-62
• /
• 2017

현재 미국, 호주, 북유럽 등지의 해외 조경실무에서 BIM의 필요성에 대한 자각과 함께 전문적 연구가 수행되고 있으며, 관련 단체에서도 조직적 활동을 펼침으로써 BIM을 활용한 조경 프로젝트들이 증가하는 추세다. 그러나 아직 국내 조경분야에서는 BIM 도입이 이루어지지 않고 있으므로, 본 연구에서는 BIM을 활용한 조경 프로젝트 사례를 조사, 분석하여 BIM 도입에 따른 효과와 활용방법을 논하고자 했다. 이를 위해 세 가지 BIM 도입효과인 설계업무의 효율성 향상, 협업 환경의 마련, 지형설계의 형태 구현을 보여주는 조경 프로젝트들을 선정하고, 이들을 대상으로 조경정보 구축, 3D 모델링 제작, 상호운용성 확보, BIM 모델의 시각적 활용이라는 네 가지 측면에서 BIM의 활용방법을 살펴보았다. 첫째, 조경정보 구축의 측면에서 사례들을 살펴본 결과, 시설물과 수목 등 상세한 조경요소들로부터 기반시설 등 광범위한 건설정보들이 3D 라이브러리나 2D CAD 형식으로 구축되었다. 둘째, 3D 모델링 제작을 살펴보면 간단한 지형과 수목을 포함한 조경공간을 Revit으로 모델링하거나, 정교하고 복잡한 지형을 Maya와 같은 전문적 3D 모델링 도구로 모델링했다. 그리고 통합모델은 분야별 모델을 제작하여 주기적으로 교환, 검토하고, 최종적으로 이들을 통합하는 방식으로 제작되었다. 셋째, 분야간 데이터의 상호운용성은 파일 포맷의 단일화, 상이한 포맷의 변환, 또는 정보 표준의 준수를 통해 이루어졌고, 이를 토대로 건설정보를 공유하여 협업을 도모했다. 넷째, 3D 모델을 시각화함으로써 참여자들간의 의견조율, 설계안의 인허가, 대중 홍보가 이루어졌다. 사례분석을 통해 BIM은 디자인 도구라기보다 설계업무의 효율성을 높이고, 분야간 협업을 도모하는 프로세스임을 알 수 있었고, 특히 조경가들이 BIM을 활용한 통합 프로젝트에서 중요한 역할을 수행하고 있음을 확인했다. 따라서 그간 건설분야에서 BIM으로의 전환을 통해 많은 이익과 기회를 누렸듯이 조경분야에서도 적극적으로 BIM을 도입해야 할 것이다.

• 한국지리정보학회지
• /
• 제17권3호
• /
• pp.93-103
• /
• 2014

공간정보로서의 지적정보와 건물정보의 연계에 관하여 선행 연구자료를 살펴보면 지적도와 건축물대장과의 연계나 토지와 2D기반 건물도면의 통합에 관한 연구가 제시된 바 있다. 지적정보는 지적재조사, 지적확정측량 등의 사업으로 인하여 그 정보로서의 가치가 높아지고 있다. 건물에 관한 정보는 설계분야에서 2D에서 단순한 외형적 3D 데이터가 아닌 BIM으로 전환되는 시기를 맞아 공공 및 민간분야에서 확산되고 있는 추세이다. 그러나 이러한 흐름에 맞는 지적정보와 건물정보의 연계에 대한 연구가 미약한 실정이다. 국제 BIM표준에 관한 동향을 살펴보면 IFC4에서 개선된 기능 중에 하나는 GIS와의 상호운용이 가능해졌다는 점이다. 이러한 측면에서, 지적정보와 건물정보의 연계를 위해 각각의 개선방안을 제시하고자 한다. 지적정보는 데이터의 품질제고가 필요한데 다원화된 좌표계를 통일화, 개별지적도를 연속지적도화하도록 우선적으로 개선을 추진할 필요가 있다. 건물정보는 국내 공공 및 민간분야에서 BIM의 표준화가 시급한데 국제표준인 IFC4로의 빠른 도입과 앞으로 개발될 예정이 IFC5까지 고려해야 할 것으로 보이고, BIM화 되어있지 않은 기존의 건축물에 대하여 BIM 역설계가 공공의 활용면에서 필요할 것이다.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.58-70
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance atrium in office buildings. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was considered. The result of this research is as follows: First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning the atrium within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.768-775
• /
• 2022

Current MEP designs are mostly applied by 2D-based design methods and tend to focus on simple modeling or geometry information expression such as converting 2D-written drawings into 3D modeling without taking advantage of the strength of BIM application. To increase the demand for BIM-based MEP design, geometric information, and property information of each member of the 3D model must be conveniently linked from the phase of the Design Development (DD) to the phase of Construction Document (CD). To conveniently implement a detailed model at each phase, the detailed level of each member of the 3D model must be specific, and an automatic generation of objects at each phase and automatic detailing module for each LOD are required. However, South Korea's guidelines have comprehensive standards for the degree of MEP modeling details for each design phase, and the application of each design phase is ambiguous. Furthermore, in practice, detailed levels of each phase are input manually. Therefore, this paper summarized the detailed standards of MEP modeling for each design phase through interviews with MEP design companies and related literature research. In addition, items that enable auto-detailing with DYNAMO were selected using the checklist for each design phase, and the types of detailed methods were presented. Auto-detailing items considering the detailed level of each phase were classified by members. If a DYNAMO algorithm is produced that automates selected auto-detailing items in this paper, the time and costs required for modeling construction will be reduced, and the demand for MEP design will increase.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.437-443
• /
• 2013

Recently, sustainable building design, a growing field within architectural design, has been emerged in the construction industry as the practice of designing, constructing, and operating facilities in such a manner that their environmental impact, which has become a great concern of construction professionals, can be minimized. A number of different green rating systems have been developed to help assess that a building project is designed and built using strategies intended to minimize or eliminate its impact on the environment. In the United States, the widely accepted national standards for sustainable building design are known as the LEED (Leadership in Energy and Environmental Design) Green Building Rating System. The assessment of sustainability using the LEED green rating system is a challenging and time-consuming work due to its complicated process. In effect, the LEED green rating system awards points for satisfying specified green building criteria into five major categories: sustainable sites, water efficiency, energy and atmosphere, materials and resources, and indoor environmental quality; and sustainability of a project is rated by accumulating scores (100 points maximum) from these five major categories. The sustainability rating process could be accelerated and facilitated by using computer technology such as BIM (Building Information Modeling), an innovative new approach to building design, engineering, and construction management that has been widely used in the construction industry. BIM is defined as a model-based technology linked with a database of project information, which can be accessed, manipulated, and retrieved for construction estimating, scheduling, project management, as well as sustainability rating. This paper will present a framework representing the building knowledge contained in the LEED green building criteria. The proposed building knowledge framework will be implemented into a BIM platform (e.g. Autodesk Revit Architecture) in which sustainability rating of a building design can be automatically performed. The development of the automated sustainability rating system and the results of its implementation will be discussed.

• 한국건설관리학회논문집
• /
• 제18권3호
• /
• pp.63-73
• /
• 2017

실내에서 보내는 시간이 증가함에 따라, 쾌적한 실내환경에 대한 요구가 증가되고 있다. 또한, 새집증후군과 같은 문제들에 관심이 집중되면서 실내공기질에 관한 요구 역시 증가되고 있다. 정부에서는 이러한 요구에 따라 실내환경을 관리하기 위하여 다양한 정책 및 제도를 제정하였으며, 공공건물에서의 친환경제도 인증을 필수화하였다. 실내공기질과 관련된 인증제도는 크게 3가지로 도면기반으로 인증을 평가하는 건강친화형 주택건설기준과 녹색건축인증 그리고 측정정보 기반으로 인증을 평가하는 실내공기질 인증이 있다. 이중 도면기반으로 인증을 평가는 제도들을 업무의 비중 대비 과도한 업무량이 요구된다. 친환경인증업무를 수행하는 한 회사의 인터뷰 결과 평균 업무비중보다 2배 이상의 소요시간이 필요한 것으로 조사되었다. 이는 2D기반의 작업환경에서 면적에 관한 정보들을 일일이 수작업으로 측정하여 필요이상의 업무를 수행하고 있기 때문으로 분석된다. 따라서 본 연구에서는 3D기반의 BIM모델을 이용한 실내공기질 평가 자동화 프로세스를 제시한다. 국제표준 포맷인 IFC 파일을 이용하여 필요한 면적정보 및 자재정보를 자동으로 추출하고 이를 모델에 적용하여 자동화하는 과정을 제시한다. 본 연구는 인증을 위해 필요한 업무시간을 단축하고 업무효율성을 높이는 것에 기여할 것으로 기대된다.

• KIEAE Journal
• /
• 제10권2호
• /
• pp.63-69
• /
• 2010

Diverse problems in wind environment has occurred through rapid urbanization and growth of high-rise building numbers, This study aims to propose the CFD (Computational Fluid Dynamics) simulation method and evaluation standard of wind environment in site planning of high rise apartment housing. The CFD simulation method proposed in this study is not existing detail simulation, but it is the method that a designer can correct and develop the design through immediate evaluation of design options in concept design phase. Therefore, the proposed CFD simulation method of wind environment in this study uses the BIM based CFD tool in which the 3D model in concept design phase can be used as for the CFD simulation. In this paper, the study examines existing evaluation standards of comfortableness level in wind environment for pedestrian near buildings, and selects new evaluation method which is possible to apply to the proposed CFD simulation method. In addition, it is to examine calculation time-spending and appropriate mesh division method for finding CFD result which is useful to find the best design options in aspect of wind environment in concept design phase. Furthermore, it proposes the wind environment evaluation method through BIM based CFD simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.420-422
• /
• 2007

Nowadays, the demand for home networking system is gradually increasing. But most of vendors use their own protocols. KNX/EIB ( European Installation Bus / Konnex) is a standard protocol approved as an European (EN 50090 - EN 13321-1) and a World-wide standard (ISO/IEC 14543). In this study, we develop on/off and dimming lighting control system using BIM. In this system, BIM communicates to micro-controller using PEI(Physical External Interface) communication. And this enables including more KNX/EIB communication objects in lighting control system, and providing lighting control algorithm. The technology in this paper can help to adapt the world-wide standards.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.890-896
• /
• 2009

In past projects, the main goal has been to enhance efficiency by reducing cost and time. However, considering the current condition of safety management in many construction companies, it can be confirmed that safety management has not been a top priority for a long time. Current safety management, which is based on safety standards and rules, is very ineffective and only emphasizes management after an incident. As well, although fewer accidents occur compared to the past, because construction projects are increasingly large in scale and complex, these accidents tend to be more serious and involve greater monetary loss. Furthermore, as the severity of these accidents increases, so does the possibility of fatalities. Therefore, improving safety management is essential. This study proposes an effective program for safety management, focusing on the processes to connect studies and systems, and the basic techniques required for program development. To realize this program, technical tools are suggested, including systems such as BIM (Building Information Modeling); additionally, the coordination of other systems such as an RTLS, a server, and an alarm system is proposed.