• Korean Journal of Environmental Biology
• /
• v.17 no.4
• /
• pp.427-438
• /
• 1999

Differential growth of Ulva pertusa Kjellman was observed in response to different photon irradiances and seawater. Growth rate of U. pertusa cultivated in the seawater collected from the East Sea was significantly higher than that in the seawater collected from the Yellow Sea. Optimal growth was found at $100{\mu} molm^{-2} s^{-1}$ in both cases. Chlorophyll contents of U. pertusa grown in the east sea water were higher than that cultivated in the west sea water at irradiances lower than $60{\mu} molm^{-2} s^{-1}$. At irradiances higher than $100{\mu} molm^{-2} s^{-1}$, there was no difference in chlorophyll content in between the two different sea waters with tendency that pigmentation decreased with increasing photon irradiances. Nitrate concentration in the west sea water was 2-fold higher than that in the east sea water, while phosphorus concentrations (0.03 ppm) were similar. Concentrations of $Cu^{2+}$ and $Pb^{2+}$ were 0.004 and 0.003 ppm respectively which are far below environmental standard concentrations (0.02 ppm for $Cu^{2+}$ and 0.1 ppm for $Pb^{2+}$). Taking those data into account, we have done laboratory investigations into the effects of inorganic nutrients and heavy metals on U. pertusa. As nitrate concentration increased from 0.5 to 5 ppm, growth rate of U. pertusa increased, but different concentrations of phosphorus did not cause any differential effect. On the other hand, chlorophyll contents increased with increasing phosphorus concentrations. Copper of U. pertusa be toxic decreased the growth and pigmentation as the concentration increased, whereas lead showed no such effect. Concentrations of $Cu^{2+}$ employed in the present study were much higher than those in ambient seawater. Intermittent soaring of $Cu^{2+}$ level as observed in natural seawater could, however, seriously damage the growth behaviour of U. pertusa.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.32-46
• /
• 2000

Hydrogeochemical and isotope ($\delta$$^{18}$ O, $\delta$D, $^3$H, $\delta$$^{13}$ C, $\delta$$^{34}$ S, $^{87}$ Sr/$^{86}$ Sr) studies of various kinds of waters (thermal groundwater, deep groundwater, shallow groundwater, and surface water) from the Yusung area were carried out in order to elucidate their geochemical characteristics such as distribution and behaviour of major/minor elements, geochemical evolution, reservoir temperature, and water-rock interaction of the thermal groundwater. Thermal groundwater of the Yusung area is formed by heating at depth during deep circlulation of groundwater and is evolved into Na-HCO$_3$type water by hydrolysis of silicate minerals with calcite precipitation and mixing of shallow groundwater. High NO$_3$contents of many thermal and deep groundwater samples indicate that the thermal or deep groundwaters were mixed with contaminated shallow groundwater and/or surface water. $\delta$$^{18}$ O and $\delta$D are plotted around the global meteoric water line and there are no differences between the various types of water. Tritium contents of shallow groundwater, deep groundwater and thermal groundwater are quite different, but show that the thermal groundwater was mixed with surface water and/or shallow groundwater during uprising to surface after being heated at depths. $\delta$$^{13}$ C values of all water samples are very low (average -16.3$\textperthousand$%o). Such low $\delta$$^{13}$ C values indicate that the source of carbon is organic material and all waters from the Yusung area were affected by $CO_2$ gas originated from near surface environment. $\delta$$^{34}$ S values show mixing properties of thermal groundwater and shallow groundwater. Based on $^{87}$ Sr/$^{86}$ Sr values, Ca is thought to be originated from the dissolution of plagioclase. Reservoir temperature at depth is estimated to be 100~1$25^{\circ}C$ by calculation of equilibrium method of multiphase system. Therefore, the thermal groundwaters from the Yusung area were formed by heating at depths and evolved by water-rock interaction and mixing with shallow groundwater.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.43-57
• /
• 2005

Twelve bottom sediments and three cores were collected in Juam reservoir for a study on transportation, which was controlled by particle grain size (2mm-200{\mu}m,\;200-100{\mu}m,\;100-50{\mu}m,\;50-20{\mu}m,\;<20{\mu}m), and vertical distribution of heavy metals. Sediment cores were sliced into 2 to 5 cm intervals to measure heavy metal concentrations in interstitial water and sediments with depth. Pb isotopic compositions of core samples were determined to calculate sedimentation rate. Regardless of sampling sites, levels of heavy metals and trace elements in bottom sediments are nearly constant with mean values of $14.9\;{\mu}g/g\;for\;As,\;0.81{\mu}g/g\;for\;Cd,\;30.7{\mu}g/g\;for\;Cu,\;34.7{\mu}g/g\;for\;Ni,\;63.3{\mu}g/g\;for\;Pb\;and\;87.9{\mu}g/g\;for\;Zn$. In general, Cu, Pb, Zn, Wi, and Cr in fraction of $<20{\mu}m$ exhibit the highest concentration, but content of As is the highest in grain size of $2\;mm-200\;{\mu}m$ and $200-100\;{\mu}m$. Fe and Mn occur as the dissolved compositions of the highest concentrations in interstitial waters and increase in their concentrations toward lower part of cores. On the contrary, concentrations of Zn and Cu show the highest value in the uppermost part in cores, suggesting these elements are released from reductive dissolution of hydroxides and oxidation of organic matters under different redox conditions. The highest accumulations of Cu, Ni, Pb, and Zn contents in the sediment cores are observed at 0-4 cm layers, and concentrations of Cu and Pb are especially high, implying these heavy metals are originated from anthropogenic sources. The apparent sedimentation rate estimated using unsupported $^{210}Pb$ is 0.91 cm $year^{-1}$, corresponding about 10 cm sedimentation in total depth since construction of Juam dam. These results will provide available information for management of bottom sediment in Juam reservoir.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.259-269
• /
• 1995

Column leaching tests were conducted using fresh and weathered pulverised fuel ash of some 17 and 40 years old from two major British power plants, with deionised water and simulated synthetic industrial leachate. The former was to see the leaching behaviour of weathered ash and the latter was to see if the formation of secondary products from water and PFA interaction and ameliorating effect in removing metals from industrial leachates. Fresh PFA liberates elevated concentrations of surface-enriched inorganics, including Ca, Na, K, B, $Cr_{total}$, Li Mo, Se and $SO^{2-}_4$. This might indicate their association with the surface of PFA particles. In the column leaching tests using weathered ash and deionised water, elements are not readily leached but are released more slowly, showing relatively constant concentrations. For the case of weathered ash, some readily soluble surface-enriched elements appears to have been liberated in their early stage of leaching and the liberation of glass associated elements are thought to be more important function in controlling the element concentration. The result from column leaching tests exceed for a number of elements when compared with various Water Standards and suggests the leachate from PFA disposal mound needs dilution to achieve target concentrations. PF A shows element retention effect for many elements, including B, Fe, Zn, Hg, Ni, Li and Mo, in the order of fresh Drax ash > weathered Drax ash > Weathered Meaford ash in retaining capacity. Geochemical modelling using a computer program WATEQ4F reveals some solubility controlling secondary solid products. These include $CaSO_4{\cdot}2H_2O$ for Ca, $Al(OH)_3$ for Al and $Fe(OH)_3$ for Fe.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.649-658
• /
• 2003

Early introducing the ducks into the paddy field involves a variety of environmental changes such as new surroundings and contact with water, so that some free-ranged ducks show behavioral and physiological changes indicative of stress or die from not adapted for new circumstances. Moreover, the free-ranged ducks was tread on the rice plant, and required a great deal of labor and time for captured the ducks after finishing the introducing. The aim of the present study was to examine the effect of accustoming and imprinting of duckling on behavior patterns, body weight gain and yield of the rice plant in paddy fields. Three paddy plots were used as control (no imprinting and no contact with people), taming (imprinting and regular handling) and roughness (handling roughly and strike terror to ducks) plots. Right after introducing the ducks into the paddy field, eating and moving behaviour of taming plot ducks tended to be longer time spend than that of other treatments. However, eating and moving time tended to be longer in the control than that of other two treatments on the 2 weeks after. Flighting distance was not showed in the free-ranging period taming plot, but the control plot was significantly (P<0.05) longer than the roughness plot. The captured time of free-ranged ducks tended to be shorter in the order of taming, control and roughness plots. Body weight gains was not significant. The number of rice plants damaged by free-ranging ducks in the taming plot were significantly (P<0.05) less than that in the control plot, but the yield and yield components of the rice plant were not differ among 3 treatments. These results indicated that the imprinting or regular handling and related treatments of duckling was reducing badly damage of rice plants, captured time and labor of free-ranged ducks in paddy field, although the working behavior of ducks and yield ability of the rice plants were not affected.

• Journal of Food Hygiene and Safety
• /
• v.14 no.4
• /
• pp.397-407
• /
• 1999

A survey was conducted to investigate the attitudes of the food specialist to the food developed by gene recombination. The mail survey was distributed to 1,400 food specialists and received 464, a response rate of 33.1%. Respondents were asked about knowledge, concerns of potential hazards, purchasing and labeling of the gene recombination foods. Most respondents (98.7%) have some knowledge on the gene recombination foods. 91.3% of respondents recognized necessity of gene recombination technology. However, they also point out its potential hazards (80.9%). The groups with less knowledge showed their increased worry on the hazard in comparison with ones of having more knowledge(p<0.01). The result indicated that there was negative relationship between knowledge and worry on the gene recombination foods. The groups with more knowledge showed their increased purchasing on gene recombination foods in comparison with ones of having less knowledge(p<0.01). The result indicated that there was positive relation-ship between their purchase intent for gene recombination foods and knowledge. 68.4% of respondents showed their interest on purchasing the gene recombination foods. In this group, most of them (44.9%) has on condition that low cost (27.0%). In addition, they also have not use the foods for their children (17.9%) if they buy it. Most respondents (85.3%) want labeling on the gene recombination foods.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.37-55
• /
• 2000

Two-dimensional numerical experiments and field surveys have been conducted to clarify some environmental variations in the flow and sedimentation in the adjacent seas after the construction of a tidal embankment. Velocities of flow and water levels in the bay decreased after the construction of the barrage. When the freshwater was instantly released into the bay, the conditions of flow were unaltered, with the exception of a minor variation in velocities and tidal levels around the sluices at the ebb flow. The computational results showed that freshwater released at the low water reached the outside of the bay and then returned to the inside with the tidal currents at the high water. The front sea regions of the embankment had a variety of sedimentary phases such as a clayish silt, a silty clay and a sandy clayish silt. However, a clayish silt was prevalent in the middle of the bay. On the other hand, the skewness, which reflects the behaviour of sediments, was $\{pm}0.1$ at the front regions of the embankment while it was more than ±0.3 in the middle of the bay. Analytical results of drilling samples acquired from the front of the sluice gates showed that the lower part of the sediments consists of very fine silty or clayish grains. The upper surface layer consisted of shellfish, such as oyster or barnacle with a thickness of 40～50 cm. Therefore, it seemed that the lower part of the sediments would have been one of intertidal zones prior to the embankment construction while the upper shellfish layer would have been debris of shellfish farms formed in the adjacent seas after the construction of the embankment. This shows the difference of sedimentary phases reflected the influence of a tidal embankment construction.

• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.19-25
• /
• 2000

The leaching behaviour of quinclorac was elucidated using soil columns. On top of each glass column packed with a rice paddy soil up to the 30 cm height were applied three different treatments of [$^{14}C$]quinclorac: quincloiac only (T-1), quinclorac adsorbed onto active carbon (T-2), and quinclorac adsorbed onto a mixture of active carbon and $Ca(OH)_{2}$ (T-3). Half of the columns were planted with rice plants for 17 weeks and half of them unplanted for comparison. Average amounts of $^{14}C$-activity percolated from tile soil columns without rice plants in T-1, T-2, and T-3 were 81.1%, 27.8% and 48.0%, respectively, of tile originally applied $^{14}C$, whereas those with rice plants grown were 36.8%, 9.6% and 11.0%, respectively, indicating that the leaching of [$^{14}C$]quinclorac was significantly affected by vegetation and by treatment with the adsorbents. The bioavailability of the herbicide to rice plants in T-1, T-2, and T-3 were 13.6%, 11.0% and 13.9%, respectively. The residue levels of quinclorac in the edible part of rice grains would be far less than the maximum residue limit (MRL, 0.5 ppm). After the leaching, the amounts of $^{14}C$ remaining in soil in with rice planting T-1, T-2, and T-3 were 36.3%, 73.7%, and 61.8%, whereas those without rice planting were 19.7%, 71.1%, and 52.3%, respectively. The balance sheets indicate that [$^{14}C$]quinclorac translocated to rice shoots would be lost by volatilization and/or in other ways in T-1 and T-3. The $^{14}C$-activity partitioned into the aqueous phase of the leachates collected from all treatments was less than 7% of the total, but it increased gradually with time in the case of rice growing, suggesting tile formation of some polar degradation products.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.72-81
• /
• 2016

Feeding behaviors of the pear psylla, Cacopsylla pyricola, and their changing feeding behaviors were recorded and analyzed with an electrical penetration graph (EPG) analysis against 5 insecticides. And their mortality against insecticides were carried out in the laboratory. General feeding behavior patterns of C. pyricola were changed by insecticide treatments. Especially, the type and frequency of waveforms differently occurred depending on a sort of insecticides treated. Total duration of transition to waveform PE1 and phloem ingestion (waveform PE2) were significantly different between treatment and non-treatment of insecticides. When 5 different insecticides were treated on pear leaves, difference of feeding patterns were recorded. In case of treatment of benfuracarb, total duration of non-probes (waveform Np) was appeared higher than any other insecticide. However, when flonicamid and deltamethrin were treatment, total duration of stylet penetration (waveform PA) and xylem ingestion (waveform PG) were appeared higher than other insecticide, respectively. As results feeding behaviour of C. pyricola after treated insecticides with time-based consumed rate of C. pyricola, the rate of non-probe (waveform Np) was longer than start penetration (waveform PA), penetration and ingestion in parenchyma cells (waveform PC1+PC2), ingestion at phloem (waveform PD+PE1+PE2) and xylem (waveform PG). As result of direct spray treatment to C. pyricola, mortality of C. pyricola against imidacloprid was higher than any other insecticide on 24 hours after treatment. However, all of insecticides showed 100% mortality of after 48 hours. On the other hand, when 5 insecticides sprayed on the pear leaves and then C. pyricola located on the treated leaves, benfuracarb showed the most toxicity against C. pyricola among insecticides. These result was consistent with the EPG results that showed relatively longer total duration time of waveform Np (non-probes) by benfuracarb treatment.