• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.328-333
• /
• 2003

When the extract of the medicinal plants, Kaempferia galanga L., Zanthoxylum bungeanum, Eugenia caryophyllata, Foeniculum vulgare, was added to Naengmyeon broth with the concentration of 0.1% and 0.3% each, its effect during the preservation time of broth was investigated. pH of the extract-added broth was lower than control at the initial, but higher after 72 hours of preservation, which showed that when it added 0.1% and 0.3% of extract to the broth, pH of Kaempferia galanga L. was 4.92 and 5.08 respectively, whereas control was 4.60. Titratable acidity was lowered after 48 hours and also Kaempferia galanga L. showed the lowest acidity with 0.66 for adding 0.1% of its extract and 0.55 for 0.3% of adding, but control was 0.89 at the time of 90 hours of preservation, and then it showed to be lowered in the order of Zanthoxylum bungeanum, Eugenia caryophyllata and Foeniculum vuigare. Turbidity of each broth added the extracts of four of the medicinal plants was 7.5∼7.9 and 7.9∼8.2, respectively for 0.1% and 0.3% of concentration at the initial, but it began to lower and 90 hours later it was 8.8∼9.5 and 8.7∼9.0 respectively, whereas control was 10.8. Total viable cells(TVC) and coliform bacteria(CB) were increased with great at the 72 hours of preservation time, and Kaempferia galanga L. was the most effective, which when control was 4.8${\times}$10 CFU/ml at 72 hours, TVC was 1.7${\times}$10 CFU/ml for the addition of 0.1% of extract and 0.9${\times}$10 CFU/ml for 0.3%. CB was 3.2${\times}$10 CFU/ml for 0.1% and 1.7${\times}$10 CFU/ml for 0.3% respectively and 6.0 ${\times}$ 10 CFU/ml for control at the time of 72 hours, and it was lowered in the order of Zanthoxylum bungeanum, Eugenia caryophyllata and Foeniculum vulgare. Volatile basic nitrogen content detected that control was 2.67mg% at first, and then increased to 3.96mg% at 90 hours of preservation, but the broth added with the extract of Kaempferia galanga L. was 2.58mg% for 0.1% and 2.47mg% for 0.3% at the initial, and at 90 hours it was 3.64mg% and 3.33mg% respectively. The results of adding the extracts of four medicinal plants for the improvement of the preservation time of Naengmyeon broth, were that the most effective medicinal plant was Kaempferia galanga L. and the antimicrobial activity of the medicinal plant extracts for Naengmyeon broth was highly effective after 3 days of preservation time.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.75-90
• /
• 2011

At the beginning of the Chos$\breve{o}$n dynasty, punch'$\breve{o}$ng began as a simplified form of inlaid celadon, and in the two following centuries it developed into a popular folk craft in various styles and expressive decorations; overtime, it was increasingly made to resemble whiteware, and its production stopped after the Japanese invasion of Korea. In the present study, the body and glaze compositions of punch'$\breve{o}$ng were examined and compared with those of celadon and whiteware, whose compositions have previously been compared with those of Chinese ceramics. Here, the analyzed shards were organized into 28 groups based on their production sites and archaeological characteristics. For each group, the body and glaze compositions of several shards(usually three to five) were obtained, averaged, and compared with those of the other groups. These comparisons showed that the majority of the punch'$\breve{o}$ng bodies were formed, like those of celadon and whiteware, with mica-quartz porcelain stone, which was commonly used in Yuezhou, Jingdezhen, and other southern Chinese kilns. The glazes consisted of clay materials and flux components made from various proportions of wood ash, burnt limestone (glaze ash) and crushed limestone. Overall, the punch'$\breve{o}$ng glazes resembled the Kory$\breve{o}$ celadon and Kory$\breve{o}$ whiteware glazes more closely than the Chos$\breve{o}$n white wareglazes. However, the $TiO_2$ levels found in the tested punch'$\breve{o}$ng were low, similar to those of Chos$\breve{o}$n whiteware; this indicated that glaze stone was used as the clay component of the punch'$\breve{o}$ng glazes, as was the case for Chos$\breve{o}$n whiteware. This study of the material characteristics of punch'$\breve{o}$ng may be used as a comparative framework for analyzing ceramic shards discovered at current and future excavations within Korea.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.49-58
• /
• 2018

For the immobilization of high-radioactive nuclides such as Cs and Sr by high-temperature thermal decomposition, this study was carried out to investigate the phase transformation with calcined temperature by using TGA (thermogravimetric analysis) and XRD (X-ray diffraction) in the Cs-adsorbed CHA (chabazite zeolite of K type)-Cs and CHA-PCFC (potassium cobalt ferrocyanide)-Cs zeolite system, and Sr-adsorbed 4A-Sr and BaA-Sr zeolite system, respectively. In the case of CHA-Cs zeolite system, the structure of CHA-Cs remained at up to $900^{\circ}C$ and recrystallized to pollucite ($CsAlSi_2O_6$) at $1,100^{\circ}C$ after undergoing amorphous phase at $1,000^{\circ}C$. However, the CHA-CFC-Cs zeolite system retained the CHA-PCFC-Cs structure up to $700^{\circ}C$, but its structure collapsed in $900{\sim}1,000^{\circ}C$, and then transformed to amorphous phase, and recrystallized to pollucite at $1,100^{\circ}C$. In the case of 4A-Sr zeolite system, on the other hand, the structure of 4A-Sr maintained up to $700^{\circ}C$ and its phase transformed to amorphous at $800^{\circ}C$, and recrystallized to Sr-feldspar ($SrAl_2Si_2O_8$, hexagonal) at $900^{\circ}C$ and to $SrAl_2Si_2O_8$ (triclinic) at $1,100^{\circ}C$. However, the BaA-Sr zeolite system structure began to break down at below $500^{\circ}C$, and then transformed to amorphous phase in $500{\sim}900^{\circ}C$ and recrystallized to Ba/Sr-feldspar (coexistence of $Ba_{0.9}Sr_{0.1}Al_2Si_2O_8$ and $Ba_{0.5}Sr_{0.5}Al_2Si_2O_8$) at $1,100^{\circ}C$. All of the above zeolite systems recrystallized to mineral phase through the dehydration/(decomposition) ${\rightarrow}$ amorphous ${\rightarrow}$ recrystallization with increasing temperature. Although further study of the volatility and leachability of Cs and Sr in the high-temperature thermal decomposition process is required, Cs and Sr adsorbed in each zeolite system are mineralized as pollucite, Sr-feldspar and Ba/Sr-feldspar. Therefore, Cs and Sr seen to be able to completely immobilize in the calcining wasteform/(solidified wasteform).

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.82-95
• /
• 1980

This paper complies the results of the studies so far made on the subsoil improvement of subsurface drainage systems for wet paddy fields (those were located in the Gum-Ho area in Kyung Buk province) which had poor permeability and a high water table. In general, a drainage problem is an excess of water on the ground surface which can effect the productivity and bearing capacity of the soil. With drain pipe systems, (According to their depths and spacing) it may be possible to correct that problem. The experimentation consisted of three test plots, two of which included drain pipe systems with varing depths and width spacing of the pipes. The third plot (C) was an ordinary plot being exempt of a drain pipe system. In detail, the depth of plot A was 80 cm, and the width spacings began at 2. Om and increased by 2. Om up to 10. 0m. The depth of plot B was 60cm and the width spacing was the same as plot A. These tests were performed to research specific details; such as crop yeild, bearing capacity of the soil, the amount of underdrainage, surface cracks, root distribution, the water table level, the consumptive water depth and the soil moisture content. The test period lasted three years, from 1977 thru 1979. The results obtained were as follows: 1. During the test period, the weather conditions for the area tested were in accordance with the annual average for that area. Furthermore the precipitation factor during the spring cultivation season, the intermediate drainage period and the harvest drainage period was of optimum conditions for controling surface cracks, because of less precipitation than evaporation. 2. The difference in the level of the ground water table in plots A and B was hardly noticable, but the difference in the test plots and the ord. plot was greatly noticable. The test plots (A, B) were 30 to 40cm lower than the ordinary plot. On the whole, the ground water table of the ord. plot always stayed at a level of 15-20cm beneath the surface of the soil, the ground water table of the test plot A showed The difference in the depth of the pipe lower than the test plot B, while the test plots showed a remarkable descending effect. 3. The soil temperature in plot A was slightly core than in plot B with a difference of 0. 47$^{\circ}$C, but plot A was 1. 6$^{\circ}$C higher than the ord. plot during the flooding period, but after drainage the temperature difference climed to 2. 0$^{\circ}$C. 4. During the 3rd test year, the values of the cracks were recorded with the values of 59cm in plot A, 42cm in plot B and 15cm in the ordinary plot. Plots A and B had increased 2.5 times the value of the first year while the ordinary plot had remained the same. 5. The root weight of the rice was measured at a value of 77.2 gr. for plot A, 73.5 gr. for plot B and 65.3 gr. for the ord. plot. Therefore, the root growths in plots A and B were much more energetic than in the ord. plot. 6. The consumptive water depth measured during the 3rd year resulted in the values of 26. 0mm per day for plot A, and 24.9 mm per day for plot B, respectively. Therefore, both plot A and plot B maintained the optimum consumptive water depths, but the ordinary plot only obtained the value of 12.3 mm per day, which clearly showed less than the optimum consumptive water depth which is 20 to 30 mm/day. 7. The soil moisture content is in direct relationship to the ground water level. During drainage, test plot A decreased in its ground water level much more rapidly than the other two plots. Therefore, plot A had a much less soil moisture content. But this decreased water level could be directly effected by the weather conditions. 8. The relationship between the bearing capacity and the soil moisture content were directly inversely proportional. It can be assumed that the occurence of soil creaks is limited by the soil moisture content. Therefore, the greater the progress of the surface creaks resulted in a greater bearing capacity. So, tast plot A with a greater amount of surface cracks than the other test plots resulted in a greater bearing capacity. But, the bearing capacity at the harvest season could be effected by the drainage during the intermediate drainage period and by the weather conditions. 9. Comparing the production of the test plots to the ord. plot; there was an increased value of 840kg for plot A, 755kg for plot B and 695kg for the ord. plot in the rough rice. Therefore, plot A had an increase of 20% over the ordinary plot. The possibility of producing double crops was investigated. The effects on barley production in the test plots showed a value of 367kg per 10 acres, which substantiated the possibility of double crops because that value showed an increased value over the average yearly yield for those uplands. 10. So as a result, it can be recommended that by including a drain pipe system with the optimum conditions of an (80cm centimeter) depth and a (l0m) spacing will have a definite positive effect on the over all production capacity and quality of wetpaddy fields.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.1-25
• /
• 2012

The rapid digitalization across all aspects of society since 1990 led to the digitalization of cartoons. As the medium of cartoons moved from paper to the web, a powerful visual culture emerged. An encounter between cartoons and multimedia technologies has helped cartoons evolve into a video culture. Today cartoons are no longer literate culture. It is critical to pay attention to cartoons as an "expanded fest" and as visual and video culture with much broader significance. In this paper, the investigator set out to diagnose the current position of cartoons changing in the rapidly changing digital age and talk about future directions that they should pursue. Thus she discussed cases of changes from 1990 when colleges began to provide specialized education for cartoons and animation to the present day when cartoon and Multimedia Comics fests exist in addition to the digitalization of cartoons. The encounter between new technologies and cartoons broke down the conventional forms of cartoons. The massive appearance of artists that made active use of new technologies in their works, in particular, has facilitated changes to the content and forms of cartoons and the expansion of character uses. The development of high technologies extends influence to the roles of appreciators beyond the artists' works. Today readers voice their opinions about works actively, build a fan base, promote the works and artists they favor, and help them rise to stardom. As artist groups of various genres were formed, the possibilities of new stories and texts and the appearance of diverse styles and world views have expanded the essence of cartoon texts and the overall cartoon system of cartoon culture, industry, education, institution, and technology. It is expected that cartoons and Multimedia Comics will continue to make a contribution as a messenger to reflect the next generation of culture, mediate it, and communicate with it. Today there is no longer a distinction between print and video cartoons. Cartoons will expand in every field through a wide range of forms and styles, given the current situations involving installation concept cartoons, blockbuster digital videos, fancy items, and characters at theme parks based on a narrative. It is therefore necessary to diversify cartoon and Multimedia Comics education in diverse ways. Today educators are faced with a task to bring up future generations of talents who are capable of leading the culture of overall senses based on literate and video culture by incorporating humanities, social studies, and new technology education into their creative artistic abilities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.643-658
• /
• 1994

The sedimentary records of anthropogenic metal loads in the Suyeong Bay, Pusan were determined by combining the Pb-210 dating technique with the measurements of heavy metals in the sediment cores. The sedimentation rates of sediment particles ranged from $0.12\;to\;0.20\;g/m^2/yr\;or\;2.4{\sim}4.0\;mm/yr$ in accumulation rates. The lowest sedimentation rate was observed at station S3 which was characterized by a bottom with relatively low organic matter contents(e.g. TIL and TOC). Heavy metals showed generally higher concentrations at station S1 and S2 near the mouth of the Suyeong River than at station S3 and the outmost station S4. The contents of copper, lead and zinc in the sediment cores especially from station S1 and S2 began to increase around 1930, and were at their highest levels in the $1960{\sim}1970$ period as a result of increasing industrial activities. Concentrations of these heavy metals have slightly decreased since 1970, probably due to regulation of pollution discharge. The natural background levels of copper, lead and zinc in the sediments of this bay ranged $18{\pm}4ppm,\;28{\pm}6ppm\;and\;74{\pm}9ppm$, respectively, by averaging the contents in the sediment depths corresponding to periods between about 1900 and 1920 at the four stations. The total amounts of anthropogenic loads deposited in the sediments since about 1930 were estimated to be $9{\sim}291{mu}g/cm^2$ for lead, $165{\sim}1122{mu}g/cm^2$ for zinc and $20{\sim}208{mu}g/cm^2$ for copper. These values were remarkably high at stations S1 and S2 relative to the other two stations. At stations S1 and S2, the anthropogenic loads of lead, copper and zinc constituted $29{\sim}30\%,\;32{\sim}42\%\;and\;28{\sim}35\%$ of the total sedimentary inventories at the present day, respectively. These metal contents have a good correlation(r>0.7) with each other and cadmium measurements also show a positive linear relation with nickel or total organic nitrogen.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.3_4
• /
• pp.79-91
• /
• 1971

A boat seine has been used as a major fishing gear for catching anchovy (Engraulis japonica) in the southern coastal waters of Korea since 1920s. The original seine was operated by two rowing boats as the haul seine. The rowing boats were, in recent, replaced by powered boats. The net size was enlarged by more than three times the original nit as they began to by operated in the deeper waters of approximately sixty meters. However, there are many problems in the efficiency of the fishing gear to be improved. The authors studied on the hydrodynamic resistance and performance of the boat seine net of the 1/10 scale model in tow. The results are summaried as follows. 1. The hydrodynamic resistance converted from model experiment into the full scale is: $$R_1=30,000\;v^{1.2}\;(0.2{\leqq}v{\leqq}1.0)$$ $$R_2=16,000\;v^2\;(0.2{\leqq}v{\leqq}0.6)$$ where $R_1$ and $R_2$ denote the resistance of whole gear and of bag net in kg respectively, and v the speed of flow in m/sec. 2. In the extension wing, approximately seventy percent of the length of the ground rope from the towing end to the inside-wing slopes down from sea level toward the sea bottom, while the thirty percent of the inside of it remains parallel with th: 5:a level. The performance is regarded to b: inefficient for driving fish shoal into the inside-wing, especially for the shoal diving suddenly. 3. At the towing speed higher than 0.2 m/sec, the trailing edge of the inside-wing is blown backward beyond the seaming line connecting the inside-wing and the mouth of the bag net. It is regarded as an unreasonable performance to drive the fish shoal smoothly into the bag net. 4. At the towing speed higher than 0.2 m/sec, the posterior end of the lower bosom is lifted up above the level of the ground rope of the inside-wing. It is considered that the fish shoal diving suddenly can escape through the discrepancy between the lower bosom and the sea bottom, even if the ground rope of the inside-wing sweeps the sea bottom. 5. The angle of inclination of the upper bosom is estimated as $35\~40^{\circ}$. It seems that the inclination is too steep to drive smoothly the fish shoal diving toward the sea bottom into the bag net. 6. In structure, circumference of the posterior section of the bag net is wider by 1.3 times that of the anterior section. Actually in towing at a speed higher than 0.2m/sec, however, the circumference of the posterior section becomes smaller than that of the anterior section. It is recommended to be designed in a long cylindrical form.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.644-651
• /
• 2005

Dietary supplement mainly made of herb and fiber was examined whether it could reduce body weight and fat, modify blood lipid concentrations and bowel habits in 30 collegians without intentional diet restriction or lifestyle change for 5 weeks. Free-living subjects were required to take diet pills 2 times daily 30 minutes before meals. Before the study began, 24 hr recall diet record and the questionnaires had been collected. Anthropometric measurements (height, weight, waist and hip circumferences, triceps and abdomen skinfold thickness, and body fat) were performed and blood samples were withdrawn before and after the study. Blood lipid fractions analyzed were total cholesterol (TC), triglyceride (TG), HDL-cholesterol and LDL-cholesterol. After the trial, body weight, body mass index, and percent ideal body weight of the subjects were reduced to mean of 0.5 kg, 0.2 and $0.9\%$, respectively (p<0.05). Percent body fat, triceps and abdomen skinfold thickness, and waist and hip circumferences were all reduced significantly except for $\%$ abdominal fat, but $\%$ body muscle mass increased from $36.5\%$ to $37.4\%$ (p=0.000). TC and TG were remarkably diminished (p<0.01) and LDL-cholesterol tended to decrease, but no change was observed in HDL-cholesterol. Bowel movements were also increased (p<0.01). In conclusion, this specific herb and fiber-rich dietary supplement reduced body weight and body fat indices, improved anthropometric indices, modified blood lipid fractions and bowel movement desirably. The study suggest that herb and fiber-rich dietary supplement might help control body weight, body fat loss and adult diseases positively.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.280-286
• /
• 1989

The present study was to examine the effects of light, temperature, and water stress on the photosynthesis and respiration rates and its seasonal changes in 3-Year-old Fraxinus rhynchophylla and Fraxinus mandshurica seedlings raised in pot in nursery. The results obtained are as follows: 1. The estimated light compensation points at which net photosynthesis approached zero were 35 and $28{\mu}Em^{-2}\;s^{-1}$ for F. rhyrachophylla and F. mandsdzurica leaves, respectively, The light saturation points occurred at $700{\mu}Em^{-2}\;s^{-1}$ in these species. 2. The maximum rates of net photosynthesis of leaves occurred at about $25^{\circ}C$ in F. rhynchophylla and at $20^{\circ}C$ in F. mandshurica. 3. The decrease in net photosynthetic rates of leaves began at -13 bars in F. rhynchophylla and -10 bars in F. mandshurica, and then its rates approached approximately zero at -23 bars in F. mandshurica and -29 bars in F. rhynchophylla. 4. The dark respiration rates of leaves were similar from $10^{\circ}C$ to $40^{\circ}C$ between these species, Also these increased from -10 bars to -28 bars, and then decreased remarkably in these species. 5. The net photosynthetic rates of leaves of F. mandshurica were higher than those of F. rhynchoplaylla until June, and after that lower than F. rhynchophylla. The dark respiration rates of leaves of F. rhynchophylla were higher than those of F. mandshurica from June to August, and After that similar between these species. 6. The respiration rates of stem and root were highest in April during the growing season. These values of F. rhynchophylla were slightly higher than those of F. mandshurica throughout the growing season.