• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.610-613
• /
• 2013

Vehicular Ad Hoc NETwork (VANET), a subclass of Mobile Ah Hoc NETwork (MANET) has been a tech-buzz for the last couple of decades. VANET, yet not deployed, promises the ease, comfort, and safety to both drivers and passengers once deployed. The by far most important factor in successful VANET application is the data dissemination scheme. Such data includes scheduled beacons that contain whereabouts information of vehicles. In this paper, we aim at regularly broadcasted beacons and devise an algorithm to disseminate the beacon information up to a maximum distance and alleviate the broadcast storm problem at the same time. According to the proposed scheme, a vehicle before re-broadcasting a beacon, takes into account the current vehicular density in its neighborhood. The re-broadcasters are chosen away from the source of the beacon and among the candidate re-broadcasters, if the density in the neighborhood is high, then the candidate rebroadcaster re-broadcasts the beacon with high probability and with low probability, otherwise. We also performed thorough simulations of our algorithms and the results are sound according to the expectations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1178-1181
• /
• 2009

Geographic forwarding algorithms을 사용하는 Georouting protocol에서는 route maintenance을 위해서 고정된 주기마다 beacon message을 이웃노드에 전송하는 fixed periodical beacon based route algorithm을 사용하여 mobile node 정보를 습득한다. Fixed periodical beacon scheme에서의 기존 연구 이슈는 이웃노드 정보의 신뢰성을 유지하기 위해서 다양한 mobility environment 환경에 맞도록 beacon 전송주기를 적절히 결정하는 연구가 진행되어 왔다. 이와 같은 연구에서는 long periodical interval 사용 시 이웃노드의 위치정보 error을 발생시킬 확률이 높으며 또한 short periodical interval 의 경우 네트워크 내에 high route overhead 을 유발시키는 단점을 가지고 있다. 따라서 고정된 주기 방법은 다양한 mobility environment에 잘 적용되지 못하며 또한 mobility environment 에서 발생하는 route maintenance 내에 이웃노드 정보에 대한 불확실성 문제가 빈번이 발생하여 경로 설정에 잘못된 정보를 제공하여 경로 신뢰성(path reliability)과 낮은 전송률 (transmission rate)을 야기한다. 본 논문에서는 이런 이웃노드 정보의 불확실성 문제를 극복하기 위해서 mobile node가 스스로 자신의 위치를 체크하여 routing table을 능동적으로 갱신하는 방법을 이용하여 이 문제를 극복할 수 있도록 하였다. 모의 실험은 ns2를 이용하여 실시하였으며 결과는 low/high mobility scenario에서는 기존 방법 보다 routing overhead 을 줄이면서 높은 전송률 (transmission rate)을 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.180-182
• /
• 2021

This paper proposes a method for estimating the location of a user using a beacon to provide a service in an indoor environment. To estimate the location using the beacon, a Gaussian filter was applied to the RSSI value of the beacon, and the distance conversion function was obtained through the filtered RSSI value to estimate the tag location by trilateration. Then, in the indoor space where the beacons are installed, the location estimation accuracy of 8 places where 3 beacons are at a certain distance was confirmed. As a result, it was possible to confirm the position estimation accuracy of ±0.097 standard deviation and 0.242 distance error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.302-313
• /
• 2018

As the demand for indoor location recognition system has been rapidly increased in accordance with the increasing use of smart devices and the increasing use of augmented reality, indoor positioning systems(IPS) using BLE (Bluetooth Lower Energy) beacons and UWB (Ultra Wide Band) have been developed. In this paper, a positioning plate is generated by using trilateration technique based on BLE Beacon and using RSSI (Received Signal Strength Indicator). The resultant value is used to calculate the PDR-based coordinates using the positioning element of the Inertial Measurement Unit sensor, We propose a precise indoor positioning algorithm that combines RSSI and PDR technique. Based on the plate algorithm proposed in this paper, the experiment have done at large scale indoor sports arena and airport, and the results were successfully verified by 65% accuracy improvement with average 2.2m error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1423-1430
• /
• 2016

The MAC protocols, which are classified into synchronous and asynchronous MAC protocol in the wireless sensor network, have actively studied. Especially, the asynchronous MAC protocol needs to research on the algorithm synchronizing between nodes, since each node independently operates in its own duty cycle. Typically, Receiver-Initiated MAC protocol is the algorithm synchronizing particular nodes by using beacon immediately transmitted by each node when it wakes up. However, the sender consumes unnecessary energy because it blankly waits until receiving the receiver's beacon, even if it does not know when the receiver's beacon is transmitted. In this paper, we propose the MAC protocol which can improve the performance by selecting an optimal node between a sender and a receiver to overcome the disadvantages. The simulation results show that the proposed algorithm improves energy efficiency and decreases average delay time than the conventional algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.153-160
• /
• 2016

In this paper, we propose a system that tracks the position of the passengers and sailors using a Bluetooth-based Beacon in the ship. The position of the tracking passengers, sometimes fatal emergencies of the rescue team, such as the sinking of the ship is utilized in order to efficiently and quickly rescue the passengers, and the collected data can be utilized additionally by grasping the flow of human traffic patterns. The system proposed in this paper, install MAC data acquisition called AP (Access Point) for each cabin, and in the installed AP retrieves Tag of the information provided to the passenger and collected. A Tag has only its own MAC Address to the privacy, no user information is not collected. All data communication by sending and receiving MAC Address was only to ensure anonymity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1368-1373
• /
• 2015

Recently, There is increasing interest in the IoT(Internet of Thing) as intelligent information service that enables communication between people and things based on internet. In particular the demand for indoor location-based services with the development of smart devices is rapidly increasing. Using the RSSI signal that is provide to the BLE(Bluetooth Low Energy) for Indoor location information measurement calculates distance information between beacon and mobile terminal. However, simply using the RSSI signal to the distance measurement has a difficult to get the indoor location information due to the influence of the signal interference and the weather. In this paper, by performing an operation for obtaining a reliable distance information from the signal information of iBeacon we propose a system for providing reliable indoor location.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.126-131
• /
• 2017

This paper designs a smart safety measurement system with Bluetooth beacon sensor nodes that can provide risk detection and evacuation/countermeasure services. The Bluetooth beacon sensor nodes is easily able to be attached to old building wall or construction or civil structure with potential danger. The proposed smart safety measurement system transmits various sensor data such as acceleration, gyroscope, geomagnetic, pressure, altitude, temperature, humidity at the spot where Bluetooth beacon sensor nodes are installed, and we can use them for risk perception, prediction, and warning services. To verify the effectiveness of the proposed system, we performed filed tests which showed that measured displacement values of precast retaining walls were within the permitted displacement value of 38.5 mm.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.82-88
• /
• 2017

Emergency lights and exit signs are an indispensable part of safety precautions for effective evacuation in case of emergency in public buildings. These emergency sign indicates safe escape routes and emergency doors, using an internationally recognizable sign. However visibility of those signs drops drastically in case of emergency situations like fire smoke, etc. and loss of visibility causes serious problems for safety evacuation. This paper propose a novel emergency light and exit sign built-in with Bluetooth Low Energy (BLE) Beacon to assist the emergency self-guiding evacuation using devices for crisis and emergency management to avoid panic condition inside the buildings. In this approach, the emergency light and exit sign with the BLE beacons deployed in the indoor environments and the smart devices detect their indoor positions, direction to move, and next exit sign position from beacon messages and interact with map server in the Internet / Intranet over the available LTE and/or Wi-Fi network connectivity. The map server generate an optimal emergency exit path according to the nearest emergency exit based on a novel graph generation method for less route computation for each smart device. All emergency exit path data interfaces among three system components, the emergency exit signs, map server, and smart devices, have been defined for modular implementation of our emergency evacuation system. The proposed exit sign experimental system has been deployed and evaluated in real-time building environment thoroughly and gives a good evidence that the modular design of the proposed exit sign system and a novel approach to compute emergency exit path route based on the BLE beacon message, map server, and smart devices is competitive and viable.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.35-43
• /
• 2004

An arbitration method is proposed to resolve a collision and arbitrate beacon transmissions in an indoor Positioning system consisting of multiple beacons and listeners. Although two or more beacons may compete to transmit signals simultaneously, a single winner in the competition is determined autonomously through the arbitration process while they are transmitting. So, it can continue to send its data, but the others give up their transmissions during the arbitration process. As a consequence, update rate for location information and channel utilization can be improved by avoiding that all beacons fail due to a collision. Once a beacon succeeds in transmitting its signal, a low-level priority is assigned to it. And a high-level priority is allocated to a beacon which gave up its transmission during arbitration process. This will guarantee every beacon has fair transmission opportunity with the arbitration method. As no centralized control is required among beacons, a Positioning system can still be easily deployed and expanded with this arbitration method.