• 제목/요약/키워드: BBR

검색결과 37건 처리시간 0.018초

고지방식이로 유도한 비만마우스에서 berberine과 silibinin 복합투여를 통한 지질대사 개선과 항비만 효능 증진 (Combination of berberine and silibinin improves lipid metabolism and anti-obesity efficacy in high-fat diet-fed obese mice)

  • 이진형;최영훈;윤영걸
    • Journal of Applied Biological Chemistry
    • /
    • 제64권3호
    • /
    • pp.291-298
    • /
    • 2021
  • 본 연구에서는 고지방식이(HFD)를 급식하여 제조한 비만마우스 모델을 사용하여 berberine (BBR)과 silibinin (SBN) 복합투여가 혈중 지질대사 및 항비만 개선 효능에 유의적인 시너지 효과가 있는지 조사하였다. HFD로 유도된 비만마우스를 8 주 동안 HFD의 지속적인 제공와 함께 BBR 및 SBN (BBR-SBN) 조합을 투여하였다. 실험이 진행되는 동안 체중과 식이량을 측정하였고 혈중 총 콜레스테롤, 중성지방 및 HDL 콜레스테롤 수준을 분석하였다. HFD를 제공한 마우스는 정상 대조군(NC) 그룹에 비해 체중과 총 콜레스테롤 및 중성지방 수치가 급격히 증가했다. 그러나 이러한 비만마우스에 BBR-SBN조합을 투여하였을 때 체중 증가가 현저하게 감소하였고 HDL 콜레스테롤 수치가 증가하였으며 총 콜레스테롤 및 중성지방 수치는 유의하게 억제되었다. HFD그룹의 복부지방 무게는 유의하게 증가했으며 부고환 지방조직 내의 지방세포의 크기가 NC 그룹에 비해 크게 확장된 것으로 나타났다. 그러나 BBR-SBN 그룹에서는 지방세포의 크기가 NC 그룹의 크기와 비슷했으며 복부지방 무게가 현저하게 감소하였다. 더불어, HFD 그룹에서 보이는 간 조직의 거대 소포성 지방구의 축적은 BBR-SBN 그룹에서 크게 감소되었다. 이러한 결과는 BBR-SBN 조합이 HFD 유발 비만마우스에서 체중 및 복부 지방 증가를 현저하게 감소시키는 경향이 있으며 혈청 내의 총 콜레스테롤 및 중성지방 수준을 낮추어 항비만 효능을 개선시킬 수 있는 가능성을 보여주는 것으로 앞으로 항비만 치료 및 개선제제로서의 잠재력을 가지고 있음을 시사한다.

Resilient Packet Transmission (RPT) for the Buffer Based Routing (BBR) Protocol

  • Rathee, Geetanjali;Rakesh, Nitin
    • Journal of Information Processing Systems
    • /
    • 제12권1호
    • /
    • pp.57-72
    • /
    • 2016
  • To provide effective communication in the wireless mesh network (WMN), several algorithms have been proposed. Since the possibilities of numerous failures always exist during communication, resiliency has been proven to be an important aspect for WMN to recover from these failures. In general, resiliency is the diligence of the reliability and availability in network. Several types of resiliency based routing algorithms have been proposed (i.e., Resilient Multicast, ROMER, etc.). Resilient Multicast establishes a two-node disjoint path and ROMER uses a credit-based approach to provide resiliency in the network. However, these proposed approaches have some disadvantages in terms of network throughput and network congestion. Previously, the buffer based routing (BBR) approach has been proposed to overcome these disadvantages. We proved earlier that BBR is more efficient in regards to w.r.t throughput, network performance, and reliability. In this paper, we consider the node/link failure issues and analogous performance of BBR. For these items we have proposed a resilient packet transmission (RPT) algorithm as a remedy for BBR during these types of failures. We also share the comparative performance analysis of previous approaches as compared to our proposed approach. Network throughput, network congestion, and resiliency against node/link failure are particular performance metrics that are examined over different sized WMNs.

재생 아스팔트 바인더의 물리적 특성과 저온균열 저항성 연구 (Physical Properties and Low Temperature Resistance of Recycled Binder)

  • 이영관;김준은;도영수;김광우
    • 한국도로학회논문집
    • /
    • 제6권4호
    • /
    • pp.1-12
    • /
    • 2004
  • 본 논문은 상온상태의 폐아스팔트 포장재료를 가열재활용하여 기층용뿐만 아니라 표층용으로 활용함에 있어 재생 아스팔트 바인더의 특성을 연구한 것이다. 4종류의 RAP을 가지고 RAP 자체의 기본 물성을 시험하였다. 배합설계는 표층에는 RAP을 10, 20%를 첨가하였고, 기층에는 10. 20, 30%를 첨가하였다. 재생혼합물의 신규바인더로는 AC 60-80을 선정하였다. 침입도, 점도, GPC, TFO. 저온균열 저항성을 평가하기 위한 BBR 실험을 수행하였다. 절대점도와 GPC에서의 대형입도분자(LMS)를 지수함수 회귀분석을 통해 $R^2$이 0.95 이상이었고 이것은 절대점도 추정에 GPC 결과가 상당히 정확함을 시사해주고 있다. RAP을 첨가한 재생 아스팔트 바인더의 PG 저온 등급은 일반 신규 바인더에 비해 한 단계 높은 등급을 나타내므로 저온균열에 대한 저항성은 약간 약한 것으로 나타났다.

  • PDF

저점도 및 고점도 Bulk-fill Giomer 복합레진과 Bulk-fill 복합레진의 전환율과 중합수축 (Degree of Conversion and Polymerization Shrinkage of Low and High Viscosity Bulk-Fill Giomer-based and Resin-based composites)

  • 김희라;이제식;김현정;권태엽;남순현
    • 대한소아치과학회지
    • /
    • 제46권1호
    • /
    • pp.1-9
    • /
    • 2019
  • 이번 연구에서는 저점도 및 고점도 bulk-fill giomer 복합레진의 전환율과 중합수축을 기존 bulk-fill 복합레진 및 전통적 복합레진과 비교 평가해보고자 하였다. Bulk-fill giomer 복합레진 2종류(Beautifil Bulk Restorative(BBR), Beautifil Bulk Flowable(BBF)), bulk-fill 복합레진 2종류(Tetric N-Ceram Bulk-fill(TBF), SureFil SDR flow(SDR)), 전통적 복합레진 2종류(Tetric N-Ceram(TN), Tetric N-flow(TF))를 사용하였다. 중합도 측정은 Fourier transform infrared spectroscopy을 사용하였으며, 중합수축은 linometer을 이용하여 측정하였다. 복합레진 하면의 전환율 측정 결과 2 mm와 4 mm 깊이 모두 BBR에서 가장 낮게 나왔으며, SDR에서 가장 높게 나왔다. 4 mm 깊이에서 고점도 및 저점도 bulk-fill giomer 복합레진의 전환율은 bulk-fill 복합레진에 비해 유의하게 낮은 값을 보였다(p < 0.05). 깊이에 따른 전환율 비교 시 TBF, TN, TF는 유의차를 보였으며(p < 0.05), BBR, BBF, SDR는 유의차를 보이지 않았다. 중합수축은 TF > SDR > BBF > TBF > TN, BBR 순서로 감소 했으며(p < 0.05), bulk-fill giomer 복합레진은 bulk-fill 복합레진보다 낮은 중합수축량을 보였다(p < 0.05). 이번 연구 결과 4 mm 깊이에서 bulk-fill giomer 복합레진 및 TBF는 불충분한 중합을 나타냈으며, 2 mm와 4 mm 모두에서 고점도 및 저점도 bulk-fill giomer 복합레진은 bulk-fill 복합레진에 비해 낮은 전환율을 보였다. 그러므로 bulk-fill giomer 복합레진의 임상적인 적용을 위해서는 이에 대한 충분한 고찰 및 주의가 필요할 것으로 생각된다.

한약재의 물 추출물이 당대사 관련 효소와 항산화 활성에 관한 연구 (A Study on the Glucose-regulating Enzymes and Antioxidant Activities of Water Extracts from Medicinal Herbs)

  • 최면;김대중;이현주;유진균;서동주;이준희;정미자
    • 한국식품영양과학회지
    • /
    • 제37권5호
    • /
    • pp.542-547
    • /
    • 2008
  • 본 연구에서는 제2형 당뇨병를 가진 GK 흰쥐(Goto-Kakizaki) 간에서 추출한 cytosol과 심장에서 추출한 mitochondria를 이용한 모델계에서 당대사 관련 효소인 glucokinase glucokinase(GCK), pyruvate dehydrogenase(PDH), acetyl-CoA carboxylase(ACC) 및 glucosidase 활성에 대한 한약재의 물 추출물의 항당뇨 효과를 연구하였다. 그리고 역시 그들의 물 추출물의 free radical 소거활성을 DPPH 방법으로 알아보았다. Free radical 소거활성은 산수유(CF), 목단피(MDB), 천화분(CHB) 그리고 산약(SY)의 물 추출물이 강했고 반면에 백목령(BBR), 숙지황(SGH)과 택사(TS)는 낮은 소거작용을 나타내었다. 간 cytosol의 GCK 활성은 산수유(CF)와 천화분(CHB)에서 다른 추출물보다 더 강했다. 심장미토콘드리아의 PDH 활성은 택사(TS)를 제외하고 모든 추출물에서 대조군과 비교하여 높았다. 간 cytosol의 ACC 활성은 대조군보다 산수유(CF), 천화분(CHB), 숙지황(SGH), 택사(TS) 그리고 산약(SY) 추출물에서 높았다. 산수유(CF), 백복령(BBR) 및 목단피(MDB) 추출물은 ${\alpha}$-glucosidase 활성 감소를 유도했다. 따라서 모든 추출물은 혈당 상승을 억제할 수 있는 항당뇨 기능성식품이나 약품 개발을 위한 기능성 천연 소재로 이용될 수 있을 가능성을 제시하였다.

Impact of Pruning Intensity on Tree Growth and Closure of Pruning Wounds of Pinus strobus L. and Acer palmatum Thunb.

  • Lee, Kyu Hwa;Lee, Kyung Joon
    • 한국산림과학회지
    • /
    • 제98권5호
    • /
    • pp.584-592
    • /
    • 2009
  • The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

장애인들의 편의를 증진시키기 위한 환경디자인의 세부요소에 관한 연구 - 스톡홀름.오슬로 교통시설을 중심으로 - (A Study on the Environmental Elements Supporting the People with Disabilities - Focused on the Transportation Facilities of Stockholm and Oslo -)

  • 천진희
    • 디자인학연구
    • /
    • 제12권4호
    • /
    • pp.251-262
    • /
    • 1999
  • 본 연구는 장애인의 이용도가 높은 환경을 개선하고자 하는 궁극목표를 위한 단계적 연구 중 '국외법규 고찰 및 사례분석'에 관한 것이다. 이를 위해 장애인 복지에 관한 규범과 기술적인 기초를 북구에서 가장 먼저 미련하였던 스웨덴을 연구대상으로 하여 건축법규와 장애인 관련 지침을 고찰하고 스톡홀름과 오슬로의 교통시설의 환경디자인 요소를 분석하였다. 그 결과, 스웨덴의 건축법규(BBR 94)는 그 기본 개념이 접근성 안정성 효율성에 있으나, 의무사항으로 규정된 항목이 매우 적고 구체적인 세부지침도 미흡하였으며, 국립 스웨덴 장애인 연구소에서 더욱 상세한 세부지침을 제공하고 있었다. 사례분석 결과,4개의 대상시설이 정도와 방법의 차이는 있으나 건축법규에서 의무화하거나 권장하고 있는 사항보다 실내 환경에서의 접근성 적용성 안정성 이동성 지원성에서 치수 색채 재료 조명 등의 세부요소를 이용하여 다양하게 해결안을 모색하고 있는 것으로 평가되었다.

  • PDF

UV Laser를 이용한 Borosilicate-Glass (BSG)층의 선택적 에미터 형성 (Selective Emitter Formation of Borosilicate-Glass (BSG) Layer using UV Laser)

  • 김가민;장효식
    • 한국재료학회지
    • /
    • 제31권12호
    • /
    • pp.727-731
    • /
    • 2021
  • In this study, we have investigated a selective emitter using a UV laser on BBr3 diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr3 diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al2O3 deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

음주 측정의 신뢰도에 대한 분석 (혈액호흡 분배비율을 중심으로) (Analysis about the reliability of sobriety testing (focused on the Blood-Breath Ratios))

  • 이원영;고명수
    • 대한교통학회지
    • /
    • 제26권6호
    • /
    • pp.49-60
    • /
    • 2008
  • 본 연구의 목표는 음주운전 증거확보용 음주측정에서 혈액과 호흡의 알코올비율의 분산성을 평가하며 호흡 중 알코올 양의 확인 절차를 합리화하는 데 목적을 두고 있다. 이를 위해 각각 남자 24명, 여자 24명 등 48명의 건강한 피험자를 대상으로 성(2), 주류(2;소주, 위스키), 음식물 유형(2;김치지게, 삼겹살), 알코올 섭취량(2; 몸무게 기준 0.35g/kg, 0.70g/kg) 등의 요인에 대해 직교표에 의한 24 요인 설계를 적용한 실험을 실시하였다. 술은 3회에 걸쳐 나누어 마시게 했으며 0.70g/kg 집단은 45분, 0.35g/kg 집단은 30분에 걸쳐 마시게 했다. 호흡측정과 혈액측정은 음주 종료 후 각기 8회와 5회 실시하였다. 그 결과 혈중알코올과 호흡알코올 측정치 간에는 r = 0.973의 높은 상관이 나타났다. 4원 변량분석 결과, 음식물 유형에 있어서 최대 BrAC의 차이(F (1, 43) =5.1, p<.029)가 드러났지만 술의 종류와 성별에 있어서는 차이가 없었다. 전체적인 혈액호흡비(BBR)는 2295${\pm}$403이었고, 95% 신뢰구간은 1489와 3101이었다. 이런 변산에도 불구하고, 호흡측정기에 2100;1의 분배비율을 적용하는 것은 합리적인 것으로 보인다. 그것은 본 연구에서 나타난 바와 같이 적어도 음주 후 30분이 지나면 대부분의 피험자가 2100:1 이상의 비율을 보이기 때문이다.

Investigations of the Boron Diffusion Process for n-type Mono-Crystalline Silicon Substrates and Ni/Cu Plated Solar Cell Fabrication

  • Lee, Sunyong;Rehman, Atteq ur;Shin, Eun Gu;Lee, Soo Hong
    • Current Photovoltaic Research
    • /
    • 제2권4호
    • /
    • pp.147-151
    • /
    • 2014
  • A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.