• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.723-737
• /
• 2017

In order to decide the national technical standards policy for national policy/market economy activities, the people in charge commonly make policy decisions based on the current technology level/concentration/utilization by means of major common technology field analysis using patent data. One possible source of such patent data is the domestic mobile carriers through the Korea Intellectual Property Rights Information System (KIPRIS) of the Korean Intellectual Property Office (KIPO). Using this system, we collected 20,294 patents and 152 International Patent Classification (IPC) types and confirmed KTs (9,738 cases / 47.98%), which perform relatively high technology retention activities compared to other mobile carriers through the KIPRIS of KIPO. Based on these data, we performed three analyses (SNA, PCA, ARIMA) and extracted 30 IPC types from the SNA and 4 IPC types from the PCA. Based on the above analysis results, we confirmed that 4 IPC (H04W, H04B, G06Q, H04L) types are the major common technology field of the domestic mobile carriers. Finally, the number of 4 IPC (H04W, H04B, G06Q, H04L) forecast averages of the ARIMA forecast result is lower than the number of existing time series patent data averages.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.442-447
• /
• 1994

Effect of different mixing ratio of non-glutinous and glutinous rice on physical and rheological properties of extrudate prepared in a single screw extruder were examined. The extrusion conditions in term of screw speeds, moisture content and die temperature were 258 rpm, 18% and $120^{\circ}C$, respectively. The resisdence time distribution of the most of materials were within 30 second and small portion of them went up to 80 second. The expansion ratio was the highest value (2.93) for 70% of glutinous rice in the mixture, while the lowest value for 100% of non-glutinous rice. Breaking strength was in the range between 1,051g and 1,117g for $10{\sim}20%$ of glutinous rice in the mixture, while the lowest value (737g) for 80%r of glutinous rice. As the amount of glutinous rice increased, L and a values were increased and b value was decreased. The uncooked cold paste viscosity had 400 B.U. for 100% non-glutinous rice , while no peak for the 100% glutinous rice. As the amount of glutinous rice increased up to 100%, the water absorption index (WAI) was decreased, while water solubility index (WSI) was increased. The rheological properties of extrudate were accounted by the law of Oswald. The flow behavior index of extrudate was less than 1.0, which showed pseudoplastic behavior. Yield stress was the highest value for 20% of glutinous rice in the mixture and the lowest value for $80{\sim}100%$ of glutinous; rice. Number of air cell was between 128 and 159 for $80{\sim}100%$ of glutinous rice in the mixture, while $81{\sim}84%$ for $0{\sim}20%$ of glutinous rice. The degree of shapefact was increased more when the mixtures of glutinous and non-glutinous rice was used than when glutinous or non-glutinous rice was only used.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.381-386
• /
• 2008

This study was to examine the knowledge, attitude, self-efficacy, and capability of skill for Dept. of Dental Hygiene students in performing basic skill of cardiopulmonary resuscitation as the following AHA's CPR 2005 Guide-Lines. And we hope to know the influence of those affect on the correctness of chest thrusts, the correctness of artificial respiration, and the correctness of skill performing. As a SPSS 14.0 program's analyzing results, we came to the following conclusions : 1. In the basic CPR's knowledge, the scores of knowledge rose from 5.93 before education to 12.46 after education. In attitude, the scores of attitude rose from 2.52 to 3.71 after education. In self-efficacy's scores, rose from 3.22 to 3.26 too, and all components have statistically significant differences(P < .05). 2. In performing CPR, the correctness of chest thrusts is 68.90%, artificial respiration is 19.00%. 3. Total average score of the capability of skill is 4.51. 4. Only self-efficacy affected the correctness of chest thrusts after education(P < .05). 5. Attitude after education affected both the correctness of artificial respiration and skill performing(P < .05).

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.469-477
• /
• 2000

Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.6
• /
• pp.728-737
• /
• 2005

This study was conducted to evaluate the physicochemical characteristics of pound cake made of substituted flour with different amount of $\beta-glucan$ i.e. 3, 6 and $9\%$ respectively. $\beta-glucan$ is a functional food material produced from Agrobacterium sup. R259 KCTC 10197BP. The specific gravity and pH of dough were found to be increased according to $\beta-glucan$ content Rheological property such as adhesiveness of dough has no difference between control and $\beta-glucan$ added groups. The pH of baked pound cake was not significantly different between control and $\beta-glucan$ groups. The volume of baked pound cake wag not significantly different between control and the ones with up to $6\%$ $\beta-glucan$, Lightness (L), redness (a) and yellowness (b) value of Hunter color system of cake crumb were not significantly different among teated groups, except a value of crust in $9\%$ $\beta-glucan$ group. the moisture content of cake increased according to $\beta-glucan$ content. Hardness by texture analyser was decreased with increasing $\beta-glucan$ content although cohesiveness wag not changed in β$\beta-glucan$ groups, compared with the control. Sensory evaluation results showed that the mean scores of over·all acceptability in 3 and $6\%$ $\beta-glucan$ were higher than that of control. Based on these results, the addition of $\beta-glucan$ to pound cake up to $6\%$ was considered to be desirable especially in terms of texture.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.823-836
• /
• 2013

Emissions of air pollutants and greenhouse gases (GHGs) from aircraft activities at 11 small-scale airports were investigated using the emissions and dispersion modeling system (EDMS) version 5.1.3 during the two year period of 2009~2010. The number of landing and take-off (LTO) at these airports was dominant for the aircraft type B737, accounting for more than 60% of the total LTOs. Out of the 11 small-scale airports, Gwangju (GJ, RKJJ) airport was the largest emitter of air pollutants and GHGs, whereas Yangyang (YY, RKNY) airport was the smallest emitter. The emissions of $NO_x$ and VOCs in 2010 at the 11 airports ranged from 1.9 to 83 ton/y and 0.1 to 17 ton/y, respectively. In 2010, the emissions of $CO_2$ ranged from 394 to 21,217 ton/y. The emissions of most air pollutants (except for $NO_x$ and $PM_{10}$) and GHGs were estimated to be the highest in taxi-out mode. The highest emissions of $NO_x$ and $PM_{10}$ were emitted from climb-out and approach modes, respectively. In addition, the total LTOs at the 11 small-scale airports accounted for the range of 9.3~9.9% of those at four major international airports in Korea. The total emissions of air pollutants and GHGs at the 11 airports ranged from 4.8 to 12% of those at the four major airports.

• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1439-1450
• /
• 2021

Objective: With the rapid development of proteomics sequencing and RNA sequencing technology, multi-omics analysis has become a current research hotspot. Our previous study indicated that Xinjiang brown cattle have better meat quality than Kazakh cattle. In this study, Xinjiang brown cattle and Kazakh cattle were used as the research objects. Methods: Proteome sequencing and RNA sequencing technology were used to analyze the proteome and transcriptome of the longissimus dorsi muscle of the two breeds of adult steers (n = 3). Results: In this project, 22,677 transcripts and 1,874 proteins were identified through quantitative analysis of the transcriptome and proteome. By comparing the identified transcriptome and proteome, we found that 1,737 genes were identified at both the transcriptome and proteome levels. The results of the study revealed 12 differentially expressed genes and proteins: troponin I1, crystallin alpha B, cysteine, and glycine rich protein 3, phosphotriesterase-related, myosin-binding protein H, glutathione s-transferase mu 3, myosin light chain 3, nidogen 2, dihydropyrimidinase like 2, glutamate-oxaloacetic transaminase 1, receptor accessory protein 5, and aspartoacylase. We performed functional enrichment of these differentially expressed genes and proteins. The Kyoto encyclopedia of genes and genomes results showed that these differentially expressed genes and proteins are enriched in the fatty acid degradation and histidine metabolism signaling pathways. We performed parallel reaction monitoring (PRM) verification of the differentially expressed proteins, and the PRM results were consistent with the sequencing results. Conclusion: Our study provided and identified the differentially expressed genes and proteins. In addition, identifying functional genes and proteins with important breeding value will provide genetic resources and technical support for the breeding and industrialization of new genetically modified beef cattle breeds.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.72-75
• /
• 1984

The prime cause of yield reduction of sesame is the lodging-induced damage, so a study of analyzing the products of sesame and frequency of a strong wind with the relation was implemented. The regression significance between the maximum velocity of wind during growing period of sesame and products was the highest in the Mokpo, Hampyung, Haenam, and Kohung district of coast but inland districts of Kwangju was non-significant. Estimated degrees of lodging-induced damage by a strong wind was shown as generally 31-41%, but a exceptional degree was observed as high as 80.5% at Mokpo district.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.4
• /
• pp.19-30
• /
• 2018

Objective: The purpose of this study was to suggest predictors of participation restriction in community-dwelling Spinal Cord Injury (SCI) based on environmental, functional, injury-related, psychosocial, and sociodemographic factors. Methods: The participants were 82 community-dwelling SCI adults over the age of 18. They were all included in the American Spinal Injury Association's (ASIA) Levels A, B, and C. This study surveyed participants' participation using the CHART-K-SF, environmental factors using the CHIEF-25 Korean version, and functional factors using the SCIM III. Further, pain and distress were surveyed using Zung's Self-rating Pain and the PAD, self-esteem was assessed using the RSES, and self-efficacy using the GSS. Finally, information concerning injury levels, post-injury period, causes of injury-related factors, and sociodemographic factors such as gender, age, marriage, education level, and residence information were collected. The collected data were analyzed using SPSS Version 21.0 Results: Participants' risk factors were environmental and functional. The Nagelkerke's $R^2$ was.737. The OddsRatio(OR) of environmental factors(referent,0-1) was 40.346. Moreover, the OR of the $1^{st}$ quartile functional factor(referent,4thquartile) was 236. 621, and that of the$2^{nd}$ quartile was 21.174. In addition, the occupational predictors included the "policies" subscales in the CHART-K-SF, "physical/structural" in the CHIEF-25, and "mobility" in the SCIM III. Further, the predictors of "physical independence" were "services/assistance" in CHIEF-25, and "respiration and sphincter management' on the SCIM III. Additionally, "mobility" was predicted by "physical/structural" on the CHIEF-25 and "mobility" on the SCIM III. Conclusions: This study multidimensionally confirmed predictors of participation restriction. Through these facts, we investigated occupational therapists' roles in community setting. Therefore, this study's results will provide useful information for occupational therapy services, for which the goal is SCI participation improvement within the community.