• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.737-738
• /
• 2011

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.737-742
• /
• 2012

This study examined the quality characteristics of Gondre tofu containing 0, 0.1, 0.2, and 0.3% Cirsium setidens powder. Quality and sensory tests of Gondre tofu were performed. The yield rate of tofu decreased with the addition of Cirsium setidens powder. The pH of tofu decreased after the addition of Cirsium setidens powder. During 8 days storage, the addition of Cirsium setidens powder to tofu did not effectively inhibit the number of total aerobic bacteria. The L, a and b values of tofu decreased with increasing amount of Cirsium setidens powder added. In the texture properties, the hardness, cohesiveness, gumminess and brittleness increased, whereas the springiness decreased. The results of sensory evaluation showed that tofu containing 0, 0.1, and 0.2% Cirsium setidens powder had a higher taste, texture preference and overall acceptability than 0.3% Cirsium setidens powder. Therefore, the addition up to 0.2% Cirsium setidens powder positively affects the sensory evaluation of Gondre tofu. The addition 0.2% Cirsium setidens powder might be considered the most appropriate choice for manufacturing Gondre tofu.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.737-738
• /
• 2011

전력 계통현상 분석장치(DFR)에서 시각동기에 대한 중요성이 부각됨에 따라 장치의 시각동기가 중요하게 대두되고 있다. 본 연구내용에서 보여주고자 하는 DFR TimeSync Simulator는 GPS 수신기로부터 IRIG-B 신호와 1PPS 신호를 수신하여 계통현상 분석장치의 사고발생 이벤트를 위한 절대시각을 제공하는 장치이다. 이 절대시각은 계통현상 분석장치의 정밀성 및 품질을 검증하는데 적용한다. 그리고 개발된 Simulator가 정확한 1PPS 신호를 산출해 내는지를 검증하기 위해 GPS 수신기의 1PPS 신호와 Simulator에서 출력되는 1PPS 신호의 파형을 비교 실험하여 정확도 및 신뢰성을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.737-744
• /
• 2016

The printed circuit heat exchanger (PCHE) is regarded as a promising candidate for advanced heat exchangers for the next-generation supercritical $CO_2$ power generation owing to its high compactness and rigid structure. In this study, an innovative type of PCHE, in which the channel sizes for the heat source fluid and heat sink fluid are different, is considered for analysis. The thermal performance of the PCHE, with supercritical $CO_2$ as the working fluid, is numerically analyzed. The results have shown that the thermal performance of the PCHE decreases monotonically when the channel size of either the heat source channel or the heat sink channel, because of the decreased flow velocity. On the other hand, the thermal performance of the PCHE is found to be almost independent of the spacing between the channels. In addition, it was found that the channel cross sectional shape has little effect on the thermal performance when the hydraulic diameter of the channel remains constant.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.737-744
• /
• 2012

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants, with high temporal and spatial resolution under real conditions. Equipment for the gas-phase measurements of CO, NOx, $CO_2$, and THC and for the measurement of the number, concentration, and size distribution of fine and ultra-fine particles by an FMPS and CPC was placed in a minivan. The exhausts of different types of vehicles can be sampled by an MEL. This paper describes the technical details of the MEL and presents data from the experiment in which a car chases passenger vehicles fuelled by diesel and gasoline. The particle number concentration in the exhaust of the diesel vehicle was higher than that of the gasoline vehicle. However, the diesel vehicle with a DPF emitted fewer particles than the vehicle equipped with a gasoline direct injection engine, with particle diameters over 50 nm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.6 s.237
• /
• pp.737-746
• /
• 2005

The present study investigates heat/mass transfer and flow characteristics in a ribbed rotating passage with turning region. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter ($D_h$) of 26.67 mm. Rib turbulators are attached in the cross arrangement on the leading and trailing surfaces of the passage. The ribs have a rectangular cross section of $2\;mm\;(e){\times}\;mm\;(w)$ and an attack angle of $70^{\circ}$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.075. The rotation number ranges from 0.0 to 0.20 while the Reynolds number is constant at 10,000. To verify the heat/mass transfer augmentation, internal flow structures are calculated for the same conditions using a commercial code FLUENT 6.1. The heat transfer data of the smooth duct for various Ro numbers agree well with not only the McAdams correlation but also the previous studies. The cross-rib turbulators significantly enhance heat/mass transfer in the passage by disturbing the main flow near the surfaces and generating one asymmetric cell of secondary flow skewing along the ribs. Because the secondary flow is induced in the first-pass and turning region, heat/mass transfer discrepancy is observed in the second-pass even for the stationary case. When the passage rotates, heat/mass transfer and flow phenomena change. Especially, the effect of rotation is more dominant than the effect of the ribs at the higher rotation number in the upstream of the second-pass.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.789-799
• /
• 2012

In this research, a high temperature superconducting(HTS) motor is designed which is adequate for an electrical aircraft by generating high power density and the potentiality of its application to an aircraft is studied. The designed motor is based on YBCO plates, HTS coils composed of Bi-2223, and ironless air cooled resistive armature. The HTS motor is designed to generate power equivalent to O-360 engine with 180HP at 2700RPM which is used for Cessna and equivalent to CFM56 engine with 18000HP at 5000RPM which is used for B-737. Also, power densities of HTS motors are compared with power densities of aircraft engines so that we can estimate the potentiality of the HTS motor as an aircraft engine.

• Journal of Digital Contents Society
• /
• v.15 no.6
• /
• pp.737-743
• /
• 2014

For single image super resolution (SR), interpolation based and example based algorithms are extensively used. The interpolation algorithms have the strength of theoretical simplicity. However, those algorithms are tending to produce high resolution images with jagged edges, because they are not able to use more priori information. Example based algorithms have been studied in the past few years. For example based SR, the nearest neighbor based algorithms are extensively considered. Among them, neighbor embedding (NE) has been inspired by manifold learning method, particularly locally linear embedding. However, the sizes of local training sets are always too small. So, NE algorithm is weak in the performance of the visuality and quantitative measure by the poor generalization of nearest neighbor estimation. An improved NE algorithm with Support Vector Regression (SVR) was proposed to solve this problem. Given a low resolution image, the pixel values in its high resolution version are estimated by the improved NE. Comparing with bicubic and NE, the improvements of 1.25 dB and 2.33 dB are achieved in PSNR. Experimental results show that proposed method is quantitatively and visually more effective than prior works using bicubic interpolation and NE.

• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.119-123
• /
• 2009

The two dimensional quantitative structure-activity relationships (2D-QSARs) models concerning the binding affinity constants ($p[Od.]_{50}$) between 2-cyclohexyltetrahydropyrane and 2-cyclohexyltetrahydrofurane analogues as substrates, and bovine odorant binding protein (bOBP) as receptor were derived by multiple regression analyses method and discussed. The statistical quality of the optimized 2D-QSAR model (5) was good (r=0.907). From the model, the binding affinity constants ($p[Od.]_{50}$) were dependent upon the optimal value ($(TL)_{opt.}$=2.737) of total lipole (TL) of substrate molecules. Based on these findings, the high active compounds predicted by optimized 2D-QSAR model (5) were 2-(dimethylcyclohexyl)tetrahydropyrane molecule and their isomer molecules. The binding affinity constants regarding bOBP of the tetrahydrofuryl-2-yl family compounds were dependent upon the hydrophobicity (logP) of whole substrate molecules. In any case of porcine odorant-binding proteins (pOBP), the constants were dependent upon the hydrophobicity (${\pi}x={\log}P_X-{\log}P_H$) of substituents (R) in substrate molecules. Also, from the optimal values of hydrophobic constant, the hydrophobicity for bOBP influenced ca. twice time bigger (bOBP>pOBP) than that for pOBP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.729-737
• /
• 1990

This paper presents a new method of multilevel estimation of dithered images. A dithered picture, a two-tone picture which gives the illusion of picture with many shades of gray, is obtained by comparing the gray-level picture which gives the illusion of picture with a position-dependent threshold. When the intensity of a picture element exeeds the threshold it is classified as white: otherwise it is black. In the new estimation scheme, the simulation results show the SNR of the new method is improved 0.7dB compared with the old method. And we propose a new progressive image transmission by employing thie method.