References
- Hwang, J. J. and Lai, Y. Y., 1998, 'Three-Dimensional Mixed Convection in a Rotating Multiple Pass Square Channel,' Int. J. Heat and Mass Transfer, Vol. 41, pp. 979-991 https://doi.org/10.1016/S0017-9310(97)00225-1
- Iacovides, H., Jackson, D. C., Kelemenis, G., Launder, B. E. and Yuan, Y. M., 1999, 'Experiments on Local Heat Transfer in a Rotating Square-Ended U-bend,' Int. J. Heat and Fluid Flow, Vol. 20, pp. 302-310 https://doi.org/10.1016/S0142-727X(99)00019-3
- Liou, T. M., Chen, C. C. and Chen, M. Y., 2001, 'TLCT and LDV Measurements of Heat Transfer and Fluid Flow in a Rotating Sharp Turning Duct,' Int. J. Heat and Mass Transfer, Vol. 44, pp. 1777-1787 https://doi.org/10.1016/S0017-9310(00)00221-0
- Murata, A. and Mochizuki, S., 1999, 'Effects of Cross-Sectional Aspect Ratio on Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Smooth Duct,' Int. J. Heat and Mass Transfer, Vol. 42, pp. 3803-3814 https://doi.org/10.1016/S0017-9310(99)00058-7
-
Won, J. H., Lee, S. Y. and Cho, H. H., 2001, 'Heat/Mass Transfer Characteristics in a Rotating Duct with
$180^{\circ}$ Turn,' Transactions of KSME(B), Vol. 25, No. 3, pp. 405-413 - Kim, K. M., Kim, S. I., Kim, Y. Y., Rhee, D. H. and Cho, H. H., 2004, 'Detailed Measurement of Heat/Mass Transfer in a Rotating Two-Pass Duct (I),' Transactions of KSME(B), Vol. 28, No. 8, pp. 910-920 https://doi.org/10.3795/KSME-B.2004.28.8.910
- Al-Qahtani, M., Jang, Y. J., Chen, H. C. and Han, J. C., 2002, 'Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels (AR=2) by Reynolds Stress Turbulence Model,' Int. J. Heat and Mass Transfer, Vol. 45, pp. 1823-1838 https://doi.org/10.1016/S0017-9310(01)00292-7
- Mochizuki, S., Beier, M. and Murata, A., 1996, 'Detailed Measurement of Convective Heat Transfer in Rotating Two-Pass Rib-Roughened Coolant Channels,' ASME Paper No. 96-TA-6
- Murata, A., Mochizuki, S. and Takahashi, T., 1999, 'Local Heat Transfer Measurement of an Orthogonally Rotating Square Duct with Angled Rib Turbulators,' Int. J. Heat and Mass Transfer, Vol. 42, pp. 3047-3056 https://doi.org/10.1016/S0017-9310(99)00004-6
- Azad, G. S., Uddin, M. J. Han, J. C., Moon, H. K. and Glezer, B., 2002, 'Heat Transfer in a Two-Pass Rectangular Rotating Channel with 45-deg Angled Rib Turbulators,' J. Turbomacinery, Vol. 124, pp. 251-259 https://doi.org/10.1115/1.1450569
-
Fu, W. L., Wright, L. M. and Han, J. C., 2004, 'Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) with
$45^{\circ}$ Angled Rib Turbulators,' ASME Paper No. GT2004-53261 -
Rathjen, L. Hennecke, D. K., Sivade, C. and Semmler, K., 2002, 'Detailed Experimental and Numerical Heat/Mass Transfer Investigation in a Rotating Two-Pass Coolant Channel with Staggered
$45^{\circ}$ Ribs,' 9th International Symposium on Transport Phenomena and Dynamic of Rotating Machinery, Paper No. HT-ABS-034 -
Cho, H. H., Lee, S. Y. and Rhee, D. H., 2001, 'Heat Transfer Characteristics in a Two-Pass Rotating Rectangular Duct with
$70^{\circ}$ Attack Angle Ribs,' International Conference on Energy Conversion and Application (ICECA 2001), pp. 605-610 - Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- McAdams, W. H., 1942, 'Heat Transmission, 2nd Edition,' McGraw-Hill, New York