• 제목/요약/키워드: B-contraction

검색결과 275건 처리시간 0.029초

발전소 배관 내부유체의 자성 이물질 제거에 관한 연구 (A Study on Removing the Magnetic Impurity in a Power Plant Line)

  • 최윤환;김오근;서용권
    • 한국유체기계학회 논문집
    • /
    • 제6권4호
    • /
    • pp.45-49
    • /
    • 2003
  • This work focuses on eliminating tiny particles from the coolant in a nuclear pipe line by using a permanent magnet on the exterior surface of the pipe. This method have some merits compared with the currently applied methods and is expected to be applied to most of the pipe lines in the nuclear plant. For instance in this method, a ring is attacked to the exterior surface of the pipe, so that it does not affect the inflows directly. Further, the cost needed in the initial build-up of the facility is low.

기계적/전기적 측정 센서를 이용한 Kogas Pilot LNG 저장탱크 멤브레인 변형 거동 측정(II) (The Measurement of Membrane Deformation Behavior in Kogas Pilot LNG Storage Tank by the use of Mechanical/Electrical Sensor (II))

  • 김영균;홍성호;오병택;윤인수;김지훈;김석순
    • 한국가스학회:학술대회논문집
    • /
    • 한국가스학회 2003년도 추계학술발표회 논문집
    • /
    • pp.85-90
    • /
    • 2003
  • Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature. We constructed strain measurement system by using strain gage. In this paper, some problems which should be considered when measuring strain at $-162^{\circ}C$, are discussed by presenting test results on the characteristics of strain gages, Temperature sensor, adhesive and lead wire. And presenting the procedure of the constructing strain measurement system.

  • PDF

EXISTENCE AND UNIQUENESS THEOREMS OF SECOND-ORDER EQUATIONS WITH INTEGRAL BOUNDARY CONDITIONS

  • Bougoffa, Lazhar;Khanfer, Ammar
    • 대한수학회보
    • /
    • 제55권3호
    • /
    • pp.899-911
    • /
    • 2018
  • In this paper, we consider the second-order nonlinear differential equation with the nonlocal boundary conditions. We first reformulate this boundary value problem as a fixed point problem for a Fredholm integral equation operator, and then present a result on the existence and uniqueness of the solution by using the contraction mapping theorem. Furthermore, we establish a sufficient condition on the functions ${\mu}$ and $h_i$, i = 1, 2 that guarantee a unique solution for this nonlocal problem in a Hilbert space. Also, accurate analytic solutions in series forms for this boundary value problems are obtained by the Adomian decomposition method (ADM).

LOCAL CONVERGENCE OF FUNCTIONAL ITERATIONS FOR SOLVING A QUADRATIC MATRIX EQUATION

  • Kim, Hyun-Min;Kim, Young-Jin;Seo, Jong-Hyeon
    • 대한수학회보
    • /
    • 제54권1호
    • /
    • pp.199-214
    • /
    • 2017
  • We consider fixed-point iterations constructed by simple transforming from a quadratic matrix equation to equivalent fixed-point equations and assume that the iterations are well-defined at some solutions. In that case, we suggest real valued functions. These functions provide radii at the solution, which guarantee the local convergence and the uniqueness of the solutions. Moreover, these radii obtained by simple calculations of some constants. We get the constants by arbitrary matrix norm for coefficient matrices and solution. In numerical experiments, the examples show that the functions give suitable boundaries which guarantee the local convergence and the uniqueness of the solutions for the given equations.

Semi Lagrangian 방법과 Objective Time Integration을 이용한 점탄성 유동 해석 (Semi-Lagrangian flow analysis of Viscoelastic fluid using Objective Time Integration)

  • 강성용;김승모;이우일
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.99-104
    • /
    • 2006
  • A semi-Lagrangian finite element scheme with objective time stepping algorithm for solving viscoelastic flow problem is presented. The convection terms in the momentum and constitutive equations are treated using a quasi-monotone semi-Lagrangian scheme, in which characteristic feet on a regular grid are traced backwards over a single time-step. Concerned with the generalized midpoint rule type of algorithms formulated to exactly preserve objectivity, we use the geometric transformation such as pull-back, push-forward operation. The method is applied to the 4:1 planar contraction problem for an Oldroyd B fluid for both creeping and inertial flow conditions.

  • PDF

유한요소법을 이용한 스텐트의 기계적 성능 비교 및 평가 (Using Finite Element Analysis for Mechanical Properties of Coronary Stents)

  • 조승관;김한성;이상헌;탁계래;탁승제
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1306-1309
    • /
    • 2003
  • In the present paper, finite element analyses were carried out to evaluate the most important feature of a stent, that is. high radial strength and flexibility. Palmaz-Schatz 154 stent and two new models(stent A, stent B) were selected because they are the most representatives of tubular stents. Finite element analyses for the stent system were performed using ABAQUS/Explicit code. As a result, Palmaz-Schatz 154 stent shows sufficient radial strength but it needs some improvement in general properties such as high flexibility, low elastic recoil, low longitudinal contraction and low metal coverage area. Other two models show that sufficient flexibility, foreshortening and longitudinal recoil.

  • PDF

엔진 배기계의 배기가스 누설 메카니즘과 설계인자들의 영향에 관한 연구 (A Study on the Effects of the Design Parameters and Sealing Mechanism of the Exhaust Gas in Engine Exhaust System)

  • 최복록
    • 동력기계공학회지
    • /
    • 제14권4호
    • /
    • pp.37-42
    • /
    • 2010
  • This paper deals with the sealing mechanism of the gasket component and the effects of design parameters for the exhaust manifold. The finite element model includes hot-end exhaust system and a simplified gasket model supplied by ABAQUS software. The mechanical behaviors of bead and body of a gasket are measured after several times of cyclic loads by gasket supplier. From the finite element analysis due to the cyclic thermal loads, the flange of exhaust manifold shows thermal expansion and contraction in longitudinal direction as well as convex and concave deformations with respect to the engine cylinder head. And, the contact pressures of the gasket beads suddenly changes by normal deformation of inlet flanges. Therefore, the magnitudes of contact pressures could be used to determine the sealing characteristics of the exhaust gas in the exhaust system. The distributions of contact pressures in gasket bead lines shows a good agreement with the engine test results.

Studies on in vivo Wound Healing Activity of Cassia fistula Linn. Leaves (Leguminosae) in Rats

  • Bhakta, T.;Mukherjee, Pulok K.;Mukherjee, Kakali;Pal, M.;Saha, B.P.
    • Natural Product Sciences
    • /
    • 제4권2호
    • /
    • pp.84-87
    • /
    • 1998
  • Cassia fistula commonly known as Sundali was selected to evaluate its wound healing potentials based on traditional use and literature references. Methanol extract of C. fistula leaves were examined for its wound healing property in the form of an ointment in two types of wound models in rats: i) Excision wound model and ii) Incision wound model. The ointment of the leaf extract of two different concentrations (5% and 10% w/w ointment of leaves extract in simple ointment base) responded significantly in both models of wounds tested. The results were also comparable to that of standard drug, nitrofurazone in terms of wound contraction ability, epithelisation period, tensile strength and regeneration of tissue at wound area.

  • PDF

Joint stress based deflection limits for transmission line towers

  • Gayathri, B.;Ramalingam, Raghavan
    • Steel and Composite Structures
    • /
    • 제26권1호
    • /
    • pp.45-53
    • /
    • 2018
  • Experimental investigations have revealed significant mismatches between analytical estimates and experimentally measured deflections of transmission towers. These are attributed to bolt slip and joint flexibility. This study focuses on effects of joint flexibility on tower deflections and proposes criterions for permissible deflection limits based on the stresses in joints. The objective has been framed given that guidelines are not available in the codes of practices for transmission towers with regard to the permissible limits of deflection. The analysis procedure is geometric and material nonlinear with consideration of joint flexibility in the form of extension or contraction of the cover plates. The deflections due to bolt slip are included in the study by scaling up the deflections obtained from analysis by a factor. Using the results of the analysis, deflection limits for the towers are proposed by limiting the stresses in the joints. The obtained limits are then applied to a new full scale tower to demonstrate the application of the current study.

천초(川椒) 및 산초(山椒)의 효능(?能)에 관(關)한 실험적(實驗的) 연구(硏究) (?Experimental Study on the Effects of Zanthoxyli Fructus and Fagarae mandshuricae Fructus)

  • 오한균;원종훈;정규만
    • 대한한방소아과학회지
    • /
    • 제4권1호
    • /
    • pp.1-17
    • /
    • 1990
  • ?In order to investigate effects of Zanthoxyli Fructus (Sample-A) and Fagarae mandshuricae Fructus (Sample-B), experimental study was performed through observation on isolated - ileum analgesic, hypothermal, anti-pyretic, anti-inflammatory, capillary permeability, blood flow rate, blood pressure and respiratory works. The results were as follows; 1. In spontaneous movement of mice isolated-ileum, both samples were noted to have strong inhibitory action after temporary contraction, and to show antagonism against acetylcholine chloride and barium chloride. 2. Both samples were showed to have antihistamin work on guinea pig isolated-ileum 3. In analgesic work by the acetic acid method, only Fagarae mandshuricae Fructus was proved to have significant analgesic effect in mice. 4. Both sample groups indicated anti-pyretic and anti-inflammatory effect. 5. Both samples were noted to have inhibitory effect against capillary permeability ?rise in mice. ?6. Both samples were noted to have dose-dependent falling effect on blood pressure in rabbits.

  • PDF