• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.193-198
• /
• 2002

Alloys of XD45 (Ti45A12Nb2Mn-0.8vol%TiB$_2$) and XD47 (Ti47A12Nb2Mn-0.8vol%TiB$_2$) were oxidized between 800 and $1000^{\circ}C$ in air, and their oxidation characteristics were studied. The oxide scales consisted primarily of an outer $TiO_2$ layer, an intermediate $Al_2$$O_3$-rich layer, and an inner mixed layer of ($TiO_2$+$Al_2$$O_3$). Nb tended to present at the lower part of the oxide scale, whereas Mn at the upper part of the oxide scale. The Pt marker tests indicated that the outer oxide layer grew primarily by the outward diffusion of Ti and Mn, and the inner mixed layer by the inward transport of oxygen.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.8
• /
• pp.823-830
• /
• 2008

The feasibility study for the application of the photoelectrocatalytic decolorization of Rhodamine B(RhB) was performed in the slurry photoelectrochemical reactor with powder TiO$_2$. The photoelectrocatalytic process was consisted of powder TiO$_2$, Pt electrode and three 8 W UV-C lamps. The effects of operating conditions, such as current, electrolyte, air flow rate and electrode material were evaluated. The experimental results showed that optimum TiO$_2$ dosage and current in photoelectrocatalytic process were 0.4 g/L and 0.02 A, respectively. It was found that the RhB could be degraded more efficiently by this photoelectrocatalytic process than the sum of the two individual oxidation processes(photocatalytic and electrolytic process). It demonstrated a synergetic effect between the photo- and electrochemical catalysis. Photoelectrocatalytic process was affected to air flow rate and optimum air flow rate was 2 L/min. The electrode material and NaCl effect of decolorization of RhB were not significant within the experiment conditions.

• Nano
• /
• v.13 no.11
• /
• pp.1850129.1-1850129.10
• /
• 2018

To improve the high charge carrier recombination rate and low visible light absorption of {001} facets exposed $TiO_2$ [$TiO_2(001)$] nanosheets, few-layered $MoS_2$ nanoparticles were loaded on the surfaces of $TiO_2(001)$ nanosheets by a simple photodeposition method. The photocatalytic activities towards Rhodamine B (RhB) were investigated. The results showed that the $MoS_2-TiO_2(001)$ nanocomposites exhibited much enhanced photocatalytic activities compared with the pure $TiO_2(001)$ nanosheets. At an optimal Mo/Ti molar ratio of 25%, the $MoS_2-TiO_2(001)$ nanocomposites displayed the highest photocatalytic activity, which took only 30 min to degrade 50 mL of RhB (50 mg/L). The active species in the degradation reaction were determined to be $h^+$ and $^{\bullet}OH$ according to the free radical trapping experiments. The reduced charge carrier recombination rate, enhanced visible light utilization and increased surface areas contributed to the enhanced photocatalytic performances of the 25% $MoS_2-TiO_2(001)$ nanocomposites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.191-193
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC-39vol.% $TiB_2$ and using 61vol.% SiC-39vol.% $ZrB_2$ powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the SiC-$TiB_2$, and SiC-$ZrB_2$ composites. The ${\beta}\;{\alpha}$-SiC phase transformation was occurred on the $SiC-TiB_2$, $SiC-ZrB_2$ composites. The relative density, the flexural strength and Young's modulus showed respectively value of 98.57%, 226.06Mpa and $86.37{\times}10^3Mpa$ in SiC-$ZrB_2$ composites.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.907-912
• /
• 2011

Development of visible light responsive photocatalysts is a promising research area to facilitate utilization of solar energy for hydrogen production via photocatalytic water splitting. In this study two groups of samples, nitrogen (N)-doped niobium pentoxide ($Nb_2O_5$) and titanium dioxide ($TiO_2$) ($Nb_2O_5-N$, $HNb_3O_8-N$, $TiO_2-N$) and N-undoped ones ($Nb_2O_5$ and $TiO_2$) were tested. In order to utilize visible light, nitrogen atoms were doped in selected photocatalysts by using urea. A shift of the absorption edges of the Ndoped samples in the visible light region was observed. Under visible light irradiation, N-doped samples were more prominent photocatalytic activities than the N-undoped samples. Specifically, 99.7% of rhodamine B (RhB) was degraded after 60 minutes of visible light irradiation with $TiO_2-N$. Since $TiO_2-N$ shows the highest activity of RhB degradation, it was supposed to generate the highest current response. However, $HNb_3O_8-N$ showed the highest current response ($63.7mA/cm^2$) than $TiO_2-N$. More interestingly, when we compare the hydrogen production, $Nb_2O_5-N$ produced $19.4{\mu}mol/h$ of hydrogen.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.7
• /
• pp.352-357
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC - 39vol.% TiB$_2$ and using 61vo1.% SiC - 39vo1.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 180$0^{\circ}C$ for 4 hours. Reactions between SiC and transition metal TiB$_2$, WC were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H), TiB$_2$ and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-TiB$_2$, and SiC(2H), WC and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-WC composites. $\beta$\$\longrightarrow$$\alpha$-SiC phase transformation was ocurred on the SiC-TiB$_2$, but $\alpha$\$\longrightarrow$$\beta$-SiC reverse transformation was not occurred on the SiC-WC composites. The relative density, the vicker's hardness, the flexural strength and the fracture toughness showed respectively value of 96.2%, 13.34GPa, 310.19Mpa and 5.53Mpaㆍml/2 in SiC-WC composites. The electrical resistivity of the SiC-TiB$_2$ and the SiC-WC composites is all positive temperature coefficient resistance(PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$. 2.64${\times}$10-2/$^{\circ}C$ of PTCR of SiC-WC was higher than 1.645${\times}$10-3/$^{\circ}C$ of SiC-TiB$_2$ composites.posites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.679-683
• /
• 2004

[ $BaO-Sm_2O_3-4TiO_2$ ] 세라믹을 LTCC용 재료로 사용하기 위해 $B_2O_3$와 CuO를 소결조제로 첨가하여 소결온도를 낮추었다. 10.0 mol%의 $B_2O_3$만을 첨가하였을 경우 $1000^{\circ}C$에서 2시간 소결시 er=72.23, Qf=4,050GHz, ${\tau}f=-0.574ppm/^{\circ}C$의 우수한 유전 특성값을 얻을 수 있었지만, $960^{\circ}C$이하에서는 소결이 잘 이루어지지 않았다. $B_2O_3$와 CuO를 동시에 소결조제로 첨가하였을 경우에는 $900^{\circ}C$에서 2시간 소결시 10.0 mol% $B_2O_3$, 15.0 mol% CuO의 첨가조성에서 ${\varepsilon}r$=70.09, Qf=4,728GHz의 우수한 유전특성을 보여 고유전율을 가진 저온 동시 소결용 재료로서의 가능성을 보여주었다. 이처럼 BaO-$Sm_2O_3-4TiO_2$ 세라믹의 소결온도를 낮출 수 있었던 요인은 소결온도보다 용융점이 낮은 2차상들이 액상을 형성하여 액상소결이 진행되었기 때문이며 이때 소결에 기여한 이차상들은 결정화되지 못하고 비정질 상태로 남아있는 것으로 추정된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.692-699
• /
• 2006

In this work, $TiO_2$ nanoparticles were synthesized using $N_2-diluted$ and Oxygen-enriched co-flow hydrogen diffusion flames. The effect of flame temperature on the crystalline structure of the formed $TiO_2$ nanoparticles was investigated. The measured maximum centerline temperature of the flame ranged from 2,103k for oxygen-enriched flame to 1,339K for $N_2-diluted$ flame. The visible flame length and the height of the main reaction zone were characterized by direct photographs. The crystalline structures of $TiO_2$ nanoparticles were analyzed by XRD. From the XRD analysis, it was evident that the crystalline structures of the formed nanoparticles were divided into two sorts. In the higher temperature region, over the 1,700K, the fraction of formed $TiO_2$ nanoparticles having anatase-phase crystalline structure increased with increasing the flame temperature. On the contrary, in the lower temperature region, below the 1,600K, the fraction of anatase-phase nanoparticles increased with decreasing the flame temperature.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.577-585
• /
• 1992

TiB2 and TiC were prepared from the mixture of metal titanium, boron and graphite powders in Argon atmosphere by Self-propagating High-temperature Synthesis method. The sintered properties of TiB2-TiC composite as a function of TiC content and sintering temperature were investigated in TiB2 matrix. The sintered properties were the most excellent at 10 wt% TiC content in TiB2-TiC composite. The relative density, M.O.R strength, hardness and fracture toughness of TiB2-10 wt% TiC composite sintered at 190$0^{\circ}C$ for 90 min by hot-pressing under the pressure of 30 MPa were 98.6%, 634 MPa, 2128.1 kg/$\textrm{mm}^2$ and 4.09 MN/m3/2, respectively.