• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.343-347
• /
• 2008

Recently, Sunshik has been issued because of easy-cook and well-being food. Sunshik basically was made of the heated cereals. Amount of spore-forming Bacillus cereus was detected and it has been caused some problem of food safety. B. cereus was isolate from 57 out of 161 Sunshik samples resulting in the isolation rate of 35.4%. Quantitative analysis of 57 samples showed that 21 samples were less than 100 CFU/g, 33 samples were between 100 and 1,000 CFU/g and distinctively even 3 (1.9%) samples had over 1,000 CFU/g. Typical morphology of B. cereus isolated from Sunshik was observed on MYP agar and then further characteristics was identified by using VITEK 2 (Biomeriux, France). 53 strains out of 57 strains isolated from Sunshik (about 93.0%) produced diarrheal enterotoxin in brain heart infusion broth which was detected by the Bacillus cereus enterotoxin reversed passive latex agglutination test kit (Oxoid England). The D-values of the B. cereus spores were $75^{\circ}C$ (37.1mim), $80^{\circ}C$ (22.5mim), $85^{\circ}C$ (4.9mim), and $90^{\circ}C$ (3.1mim) respectively. The Z-value was calculated $12.8^{\circ}C$ in Sunshik sample inoculated with B. cereus. Therefore, the management of B. cereus in Sunshik is required for the food-safety.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2565-2570
• /
• 2010

The orthorhombic $MgB_2C_2$ structure contains well-separated parallel graphite-like $B_2C_2^{2-}$ layers which extend infinitely in two dimensions. Three possible ways to distribute B and C atoms in the hexagonal sublattice sites are adopted. Band structures for the hypothetical distribution patterns are examined to assess the electronic stability of these phases and to account for the observed arrangement by means of extended Huckel tight-binding calculations. The preferred choice is the layer with B and C alternating strictly so that B is nearest neighbor to C and vice versa. A rationale for this is given. Due to the alternation of B and C within the honeycomb layers, $MgB_2C_2$ is a band insulator, which through partial substitution of Mg with Li, is predicted to turn metallic with holes in the $\sigma$ bands at the Fermi level.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.2
• /
• pp.95-99
• /
• 1994

In order to investigate the fatty acid composition of Korean pumpkins, this study was designed. Three samples of Korean pumpkins, A(yellowish ripe), B(unripe, 30 days old) and C(unripe, 20 days old) were used for fatty acid analysis by gas chromatography. The results were as follows : Pumkin C, B and A showed 10, 12 and 15 kinds of fatty acids, respectively. In case of palmitic acid(C16:0), pumpkin C, B and A showed 22.5%, 22.9% and 26.6%, respectively. In case of u linolenic acid(C18:3), pumpkin C, B and A showed 22.6%, 23.6% and 44.8%, respectively. In case of palmitoleic acid(Cl6:1), pumpkin C. B and A showed 12.4%, 10.1% and 0.5%, respectively. In case of oleic acid(C18:1), pumpkin C. B and A showed 9.2%, 7.7% and 2.8%, respectively, In case of stearic acid(C18:0), pumpkin C, B and A showed B.S%, 3.7% and 3.5%, respectively. The ratio of P/S was 1.4, 1.6 and 1.9 for sample C, B and A, respectively. The ratio of w-3/w-6 was 1.1, 0.9 and 2.6 for sample C, B and A, respectively. Through this study, the ripe pumpkin(sample A) was thought to be good enough in nutritional aspects of fatty acids, particularly a-linoleic acid, Cl8 : 3(u-3) series.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.36-42
• /
• 2020

In order to investigate the effect of the oxidation process on thermal properties of the pitch, the oxidized pitch was prepared by changing the oxidation temperature. Thermal properties of the pitch were analyzed using thermogravimetric analysis (TGA), and it divided into three sections as A (25~100 ℃), B (250~550 ℃) and C (550~800 ℃) by derivative thermogravimetry (DTG) graph behavior. In the A section, the was reduced because the moisture contained in the pitch was removed. In the B section, as the oxidation temperature increased, the thermal stability of the pitch is improved. Because the degree of aromaticity and molecular weight of the pitch increased with increasing oxidation temperature. In contrast, the results of the C section were shown opposite of B section. Because the introduced C-OH, C-O-C, and C=O bonds were decomposed, and the resulting oxygen compounds induced the combustion reaction of the pitch.

• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.33-39
• /
• 1999

This paper included a data analysis of the unit of medical devices using mainternance recording card that had medical devices of unit failure mode, hospital of failure mode and MTBF. The results of the analysis were as follows : 1. Medical devices of unit failure mode was the highest in QC/PM such A hospital as 33.9%, B hospital 30.9%, C hospital 30.3%, second degree was the Electrical and Electronic failure such A hospital as 23.5%, B hospital 25.3%, C hospital 28%, third degree was mechanical failure such A hospital as 19.5%, B hospital 22.5%, C hospital 25.4%. 2. Hospital of failure mode was the highest in Mobile X-ray device(A hospital 62.5%, B hospital 69.5%, C hospital 37.4%), and was the lowest in Sono devices(A hospital 16.76%, B hospital 8.4%, C hospital 7%). 3. Mean time between failures(MTBT) was the highest in SONO devices and was the lowest in Mobile X-ray devices which have 200 - 400 failure hours. 4. Anverage failure ratio was the highest in Mobile X-ray devices(A hospital 31.3%, B hospital 34.8%, C hospital 18.7%), and was the lowest in Sono(Ultrasound) devices (A hospital 8.4%, B hospital 4.2%, C hospital 3.5%). 5. Failure ratio results of medical devices according to QC/PM part of unit failure mode were as follows ; A hospital was the highest part of QC/PM (50%) in Mamo X-ray device and was the lowest part of QC/PM(26.4%) in Castro X-ray. B hospital was the highest part of QC/PM(56%) in Mobile X-ray device, and the lowest part of QC/PM(12%) in Gastro X-ray. C hospital was the highest part of QC/PM(60%) in R/F X-ray device, and the lowest a part of QC/PM(21%) in Universal X-ray. It was found that the units responsible for most failure decreased by systematic management. We made the preventive maintenance schedule focusing on adjustement of operating and dust removal.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.169-173
• /
• 2020

The structural analysis was performed at this study when the axle was loaded by using a total of three automotive support beam models, models A, B and C. Comparing with three models A, B, and C, the equivalent stress is considered to be good for its durability because model C is less than the yield stress of the material. The maximum equivalent stresses happening at models A and B are 1.8 times and 2.5 times higher than the yield stress, respectively, indicating that the material is fractured. So, it does not seem to be efficient as a support beam. Model C can be applied efficiently to the improvement design of axle support beams in terms of durability compared to models A and B. The strength of automotive support beam can be evaluated by applying this research result to the automotive part. And it is seen that this study is adequate at the efficient design and aesthetic convergence practically.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.73-94
• /
• 2003

The purpose of this investigation was to analyze A kinematic analysis of the Kuzushi-arm motion when performing Morote-Seoinage in judo who was 5 females university representative judokas of light weight category in judo, and filmed on video cameras(60field/s). The data of this study digitizied by KWON3D 2.1 program computed the average and standard deviation calculated individual 5 trials with Programing Lab view 6i. From the data analysis & discussion, the following conclusions were drawn : 1) distance variable of attacking hand arm in kuzushi motion Left right(X direction) displacement variable was all of A, B, C pattern with moving left to right and leaning. Strip of displacement variable was ordo. to C(55.6cm), A(53.3cm), B(43.9cm) pattern, C pattern largely leaned to left Front Rear(Y direction) displacement variable was different A($131.3cm{\pm}3.1cm$), B($128.7{\pm}4.0cm$) and C(111.0cm) on ready position, 3 pattern leaned to rear direction. Strip of displacement was order to B(43.4cm), A(41.1cm) and C pattern(28.3cm). Up down(Z direction) displacement variable was all of A, B, C pattern leaned to up in the Kuzushi-phase and leaned to down in the Kake-phase. Strip of displacement was order to A(83.9cm), B(80.4cm), C pattern(71.9cm). 2) Shoulder joint angle variable Flexion and extension Ready position' angle was A($138.3{\pm}4.9^{\circ}$), B($142.9{\pm}3.7^{\circ}$) and C($164.5^{\circ}$) pattern, strip of flexion extension was order to C($80.9^{\circ}$), A($79.9^{\circ}$) and B($39.0^{\circ}$) pattern, greatly C pattern had largely angle change. Adduction and abduction : B and C pattern's angle change were adduction and abduction in the Kuzushi-phase after adduction in the Kake phase, A pattern's angle change was abduction in the Kuzushi-phase after adduction in the Kake phase. internal and external rotation : 3 pattern were internal rotation in the Tsukuri phase and external rotation in the Kake phase. After B and C pattern were external rotation and A pattern was internal rotation. 3) Elbow joint angle variable Flexion and extension 3 pattern's ready position angle were A($142.0{\pm}4.4^{\circ}$), B($123.5{\pm}5.5^{\circ}$) and C($105.5^{\circ}$) and flexion. Strip of flexion extension were order to A($57.9^{\circ}$), C($34.6^{\circ}$) and B($25.2^{\circ}$) pattern.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.5
• /
• pp.40-48
• /
• 2012

In this study, economic analysis of five desalination technologies for saline agricultural land was carried out. The analysis was comprehensively evaluated by calculating changes in crop production and benefit/cost (B/C) ratio. The analysis of crop production was in the order of tomato > cucumber > a (musk) melon > watermelon > cabbage, and economical efficiency for desalination technology was in the order of soil exchange > soil addition > electrokinetics > under-drainage > subsoil reversal. In cost benefit analysis, B/C ratio was in the order of under-drainage > soil exchange > electrokinetics > soil addition > subsoil reversal, and all desalination technologies used in this study have the ratio higher than 1, which means economical efficiency was high. Based on the net production considering B/C ratio, the general economic analysis was exactly order from that of crop production analysis. As a result, economical efficiency of soil exchange was highest, and economical efficiency of soil addition and electrokinetic was relatively higher than others.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1012-1019
• /
• 2004

The synthesis of novel group 9 metal complexes containing the S,S'-chelate ligands, $Li_2S_2C_2B_{10}H_{10}$ (2a) and $LiS(S=PMe_2)C_2B_{10}H_{10$} (2b), is described. Two new dinuclear complexes of the type $[{(cod)M}_2(S,S'-S_2C_2B_{10}H_{10})]$ (cod = 1,5-cyclooctadiene; M = Rh (3a), or Ir (3b)) were synthesized by the reaction of chloridebridged dimers $[M({\mu}-Cl)(cod)]_2$ with one molar equivalent of the corresponding dilithium dithiolato ligand $Li_2S_2C_2B_{10}H_{10}$ (2a). X-ray crystal structure analysis of 3a revealed a dinuclear structure in which each (cod)Rh unit is attached to a distinct sulfur atom of a 1,2-dithio-o-carboranyl ligand (2a). Additionally, the electrochemical properties of 3a and 3b were investigated by cyclic voltammetry. In an analogous manner, reaction of the lithium dithiolato ligand $LiS(S=PMe_2)C_2B_{10}H_{10}$ (2b) with $Cp^{\ast}CoI_2(CO)$ produced a mononuclear dithiolato complex, $[Cp^{\ast}CoI{(S,S'-S(S=PMe_2)C_2B_{10}H_{10})}]$ (4), which was characterized by single-crystal X-ray analysis.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.417-425
• /
• 2019

Biocontrol agents (BCAs) are widely used to protect plants from diverse biotic and abiotic stresses in agricultural and ecological fields. Among the various microbes, many subspecies of the gram-positive genus, Bacillus, have been successfully industrialized as eco-friendly biological pesticides and fertilizers. In the current study, we demonstrated that Bacillus thuringiensis C25 exhibited antagonistic effects on the mycelial growth of Rosellinia necatrix, a fungal phytopathogen. Scanning electron microscopy analysis revealed that B. thuringiensis C25 degraded the cell wall structures of R. necatrix mycelia. In the functional genomic analysis of B. thuringiensis C25, we annotated 5,683 genes and selected the gene sets that potentially encoded fungal cell wall degrading enzymes (CWDEs). The growth inhibition effects on R. necatrix were highly correlated with the transcriptional activity of the mycelial cell wall degrading genes of B. thuringiensis C25. The transcript levels of CWDEs, including CshiA, B, and Glycos_transf_2 genes in B. thuringiensis C25, were enhanced following co-cultivation with R. necatrix. In conclusion, our study suggested that B. thuringiensis C25 could serve as a suitable candidate for controlling R. necatrix and could facilitate elucidating the mechanisms underlying the antifungal activities of BCAs against phytopathogens.