• 한국지형학회지
• /
• 제25권2호
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.60-68
• /
• 1991

급속냉각기술로 제조된 $Nd_{14}Fe_{76}Co_{4}B_{6}$ 및 $Nd_{10.5}Fe_{79}Co_{2}Zr_{15}B_{7}$ 자성분말을 사용하여 성형체와 본드자석을 제조하였다. 자기특성, 최적충진률 등의 분말입도 및 형상비에 따른 거동은 합금조성에 따라 달리 나타난다. Co/Fe 비가 작은 저밀도의 $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ 합금이 같은 성형압력에서 성형체의 성형밀도 및 최적충진률이 높아 자기특성이 우수하였으나 반면에 분말입도에 따라 자기특성이 변화하였다. 성형밀도(p)와 성형압력(P) 사이 에는 ${\phi}(g/cm^{2})=5.2~5.6{\times}P^{0.045~0.065}(ton/cm^{2})$의 관계식이 성립된다. 높은 Nd/Fe 비를 갖는 급속냉각된 $Nd_{14}Fe_{76}Co_{4}B_{6}$ 합금의 초미세립(50~60 nm)으로써 높은 보자력($iH_{c}=14~15kOe$)을 보유하나, Nd/Fe비가 낮은 $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ 합금은 결정립이 조대하고(150~400 nm)Nd-rich한 입경계상의 발달이 부진하여 자벽고착기구가 주 보자력 기구 로 판명된 두 합금에서 고착지점으로서의 역할이 불충분하여 보자력이 낮은 것으로 판명되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.164-165
• /
• 2015

Recently, the reason of using foamed concrete is for core of panel, filler of construction material to give lightness. However, cement causes environmental problem. The cement generates CO₂ but we normally use cement during manufacturing foamed concrete. Accordingly, this study focuses on dynamic properties of matrix according to the addition ratio of paper ash to make lightweight matrix with blast furnace slag and paper ash which are industrial by-product. The experiment progessed in order to select th optimum mixing ratio of the blast furnace slag and paper ash. There are totally 7 levels such as B100:P0, B95:P5, B90:P10, B85:P15, B80:P20, B75:P25, B70:P30 in this study. As a result of the test, B95:P5 matrix has the best density and compressive strength.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.593-598
• /
• 2007

A new continuously variable transmission for bicycles(B-CVT) is developed by using a traction drive mechanism having inner and outer spherical rotors. The B-CVT has high power efficiency, large torque capacity, improved drivability and good packageability. The ratio change mechanism for the B-CVT is very simple, in contrast with other traction drive CVTs. After completing a conceptual design, a performance analysis and a detail design, a prototype of the B-CVT has been manufactured. The prototype has rated power of 100 watts, pedal speed of 6 rad/s and an overall speed ratio of 1.0-4.0. A bench test and an actual bicycle test have been performed to verify the practicability of the B-CVT.

• ETRI Journal
• /
• 제43권2호
• /
• pp.324-331
• /
• 2021

Space-based automatic dependent surveillance-broadcast (ADS-B) is an important emerging augmentation of existing ground-based ADS-B systems. In this paper, the problem of space-based ultra-long-range reception processing of ADS-B signals is described. We first introduce a header detection method for accurately determining the pulse position of a weak ADS-B signal. We designed a signal encoding method, shaping method, and fitness function. We then employed a genetic algorithm to perform high-precision frequency and phase estimations of the detected weak signal. The advantage of this algorithm is that it can simultaneously estimate the frequency and phase, meaning a direct coherent demodulation can be implemented. To address the computational complexity of the genetic algorithm, we improved the ratio algorithm for frequency estimation and raised the accuracy beyond that of the original ratio algorithm with only a slight increase in the computational complexity using relatively few sampling points.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.410-415
• /
• 2013

$ZrB_2$-SiC ceramics are fabricated via hot pressing with different ratios of submicron or nano-sized SiC in a $ZrB_2$-20 vol%SiC system, in order to examine the effect of the SiC size ratio on the microstructures and physical properties, such as thermal conductivity, hardness, and flexural strength, of $ZrB_2$-SiC ceramics. Five different $ZrB_2$-SiC ceramics ($ZrB_2$-20 vol%[(1-x)SiC + xnanoSiC] where x = 0.0, 0.2, 0.5, 0.8, 1.0) are prepared in this study. The mean SiC particle sizes in the sintered bodies are highly dependent on the ratio of nano-sized SiC. The thermal conductivities of the $ZrB_2$-SiC ceramics increase with the ratio of nano-sized SiC, which is consistent with the percolation behavior. In addition, the $ZrB_2$-SiC ceramics with smaller mean SiC particle sizes exhibit enhanced mechanical properties, such as hardness and flexural strength, which can be explained using the Hall-Petch relation.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.242-250
• /
• 2017

Purpose: This study was conducted to determine the appropriate operating conditions through a factorial experiment for the secondary separating part of the self-propelled pepper harvester. Methods: An experimental setup that simulates the secondary separating part of the self-propelled pepper harvester was organized. Test samples were classified into three types according to the number of peppers on a stem, and 12 sets were prepared for each type. Among the operating conditions of the secondary separating part, the rotational speed of drum B (four levels), radial clearance between drums and cylindrical teeth (three levels), and speed ratio between the three drums (two levels) were set as the test factors, and tests were repeated three times for different levels of each factor. The appropriate operating conditions were determined by analyzing the separation ratio and damage ratio of the peppers collected through the secondary separating part. Results: The test factors changed the overall separation ratio and overall damage ratio in similar trends. In other words, the conditions that caused high overall separation ratios also exhibited high overall damage ratios. Owing to the high overall damage ratio in the condition with the highest overall separation ratio, the operating conditions should be selected considering both ratios. Conclusions: When the condition with more than 60% of overall separation ratio and less than 15% of overall damage ratio was considered as the appropriate operating condition, 70 rpm of the rotational speed of drum B, 5 mm of the radial clearance between drums and cylindrical teeth, and 7:3:5 for the speed ratio of the three drums A, B, and C should be applied for the secondary separating part used in this study. Supplementary studies will be required in the future to find optimal operating conditions through the actual field test under further divided test factors.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.103-109
• /
• 2006

This paper suggests an efficient and comprehensive algorithm of the protection ratio derivation and illustrates some calculated results applicable to the initial planning of frequency coordination in the fixed wireless access networks. The net filter discrimination associated with Tx spectrum mask and overall Rx filter characteristic has been also examined to show the effect of the adjacent channel interference. The calculations for co-channel and adjacent channel protection ratios are performed for the current microwave frequency band of 6.7 GHz including Tx spectrum mask and Rx filter response. According to results, fade margin and co-channel protection ratio reveal 41.4 and 75.2 dB, respectively, for 64-QAM and 60 km at BER $10^{-6}$. It is shown that the net filter discrimination with 40 MHz channel bandwidth provides 28.9 dB at the first adjacent channel, which yields 46.3 dB of adjacent channel protection ratio. In addition, the protection ratio of 38 GHz radio relay system is also reviewed for millimeter wave band applications. The proposed method gives some advantages of an easy and systematic extension for protection ratio calculation and is also applied to frequency coordination in fixed millimeter wave networks.

• 대한가정학회지
• /
• 제25권3호
• /
• pp.49-61
• /
• 1987

The main purpose of these studies was the improvemen of nutritional supply and of the future physical coditions. The two groups which were regional difference were chosen and research for the nutritional status of elementary school students. The nutritional status of lunch-box between one elementary School of 98 students in the 6th year grade(hence-forward it was called "A-Group"), located at the center of Masan City, being provided the milk and the other elementary School of 134 students in the 6th year grade(hence-forward it was called "B-Group"), located in the small farm and fishing villages of Kusan-myun, Euichang-kun, Kyungnam province, were seweyed from the period of Nov. 20, 1986 to Dec. 4, 1986 and conclusion were as follows: 1. Nutritional status of lunch-box 1) It is indicated that in the case of A-Group, the nutirtional intake except animal protein and vitamin A were lower than the Recommended Daily Allowances of Korenas and in the case B-Group, was also lower than except vitamin A respectively and especially in both groups, the percentage of Fe was lowest and intended difference between A Group and B was that B-Group in the intake of calorie, fat, Ca, Fe and etc were lower than A-Group. 2) The total calorie-intake was short of the extent to approx. 83.8% as compared to the RDA. On the viewpoint at ratio of intake of caloric nutrients, A-Group appeared to be 69.5 : 16.5 : 14 and B-Group, 77.5 : 19.5 : 13 in order carbohydrate, protein and fat. As a result of the above ratio, B-Group depended upon carbohydrate as a staple food more than A-Group. It can be considered that the total calorie-intake is short, and that the amount of lunch-box was greatly insufficient for taking optimal nutrition. 3) Calorie, carbohydrate, vitamin B, and niacin were taken nutrition from a staple food and protein from at similar ratio of staple and subsidiary food and fat, Fe, vitamin A, vitamin B1, adn vitamin C were mainly taken from a staple food. It was indicated that B-Group was higher at the supply-ratio by a staple food than A-Group. 3. The realities of improvement of physical conditions The improvement of physical conditions of the two groups were lower in accordance with Korea Children's Growth Standard, but B-Group was inferior to A-Group. 4. Seeing that the total intake of nutrition being taken at lunch time was lower as campared to the RDA intakes between the two Groups were remakably different, a lot of efforts should be made to improve the calorie-intake for the purpose of the farm and fishing villages. For balanced intake of nutrition, selection of foods and various cooking ways are important, therefore, throughout the expansion of the lowest stratum of elementary schools for milk-supply, high-quality protein, fat, Ca, vitamin B2 and etc should be supplied to the growing students. That can narrow the gaps of the intake of nutrition and physical condition between the students who live in cities and the students who live in the country.

• 대한화학회지
• /
• 제26권5호
• /
• pp.304-309
• /
• 1982

Chlorophyll-a(chl-a)와 chlorophyll-b(chl-b)를 pyridine을 포함한 실리콘의 dimer, hexamer에 결합시킨 물질은 중합체의 pyridine 농도와 chl-a의 농도의 비가 1:1일 때 가장 큰 에너지 전이를 나타냈으며 chl-b와 실리콘 중합체는 가장 큰 들뜬 에너지를 나타냈다.