• 열처리공학회지
• /
• 제18권5호
• /
• pp.305-311
• /
• 2005

Effect of Cr contents(Cr: 0.27, 0.45 and 0.65wt.%) on precipitation process has been studied by electrical resistivity measurements, hardness and scanning electron microscope. The first stage of the process consists of the formation of Cr-rich particles, the second stage consists of the competitive growth of these particles. The kinetics of precipitation could be described by Johnson-Mehl-Avrami equation, $f(t)=1-\exp(-kt^n)$. The values of n were found to be in the range from 0.17 to 0.39 at the first stage and from 1.0 to 1.5 at the second stage. The activation energies of Cu-Cr alloys were determined by Cross-Cut method and were 90~136 kJ/mol. The maximum hardness value of $H_RB$ 84 was obtained in Cu-0.65wt.%Cr alloy.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.29-32
• /
• 2000

The static and metadynamic recrystallization of non-heat treated medium carbon steel(Fe - 0.45wt.$\%C\;-\;0.6wt.\%Si\;-\;1.2wt.\%Mn\;-\;-0.12wt.\%Cr \;-\;0.1wt.\%V \;-\;0.017wt\%$.Ti) were studied by the torsion test in the strain rate range of 0.05 - 5 $sec^{-1}$, and in the temperature range of $900\;-\;1100\;^{\circ}C$. Interrupted deformation was performed with 2 pass deformation in the pass strain range of $0.25 {\varepsilon}_p(peak strain)\;and\;{\varepsilon}_p$, and in the interpass time range or 0.5 - 100 sec. The dependence or pass strain(${\varepsilon}_i$), strain rate( $\dot{\varepsilon}$ ), temperature(T), and interpass time($t_i$) on static recrystallization (SRX) and metadynamic recrystallization (MDRX) were predicted from the modified Avrami's equations respectively. Comparison of the softening kinetics between SRX and MDRX was indicated that the rate of MDRX was more rapid than that of SRX under the same deformation variables.

• 폴리머
• /
• 제36권6호
• /
• pp.803-809
• /
• 2012

에틸렌-테트라플르오르에틸렌(ETFE) 공중합체의 비등온 결정화 거동을 DSC와 imaging FTIR을 이용하여 살펴보았다. 변형 비등온 Avrami 분석 결과, DSC에 의한 열분석의 경우 상대적으로 적은 결정화 엔탈피 변화로 인하여 Avrami 식에 의한 ln[-ln(1-X(t))] vs. ln(t) 곡선이 선형을 이루지 못하는 반면, 결정화에 의한 IR 흡수 강도 image의 변화에 의한 분석 방법인 imaging FTIR의 경우보다 선형적인 결과를 얻음에 따라 imaging FTIR이 ETFE 비등온 결정화 연구에 보다 효과적임을 알 수 있었다. 이와 함께 비등온 결정화에 의한 ETFE의 광학특성을 살펴본 결과, 서냉에 의하여 형성된 ETFE 결정의 빛 산란에 의하여 haze가 증가하며 따라서 투명도가 감소함을 알 수 있으며 비등온 결정화에 의하여 최대 8%의 투과도 감소가 일어남을 확인할 수 있었다. 이상의 결과로부터 결정화를 조절하는 냉각속도가 유리 대체 소재로 사용되고 있는 ETFE 필름의 광투과도 조절에 주요한 가공 변수임을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.90-96
• /
• 2018

Reaction characteristics and kinetics of a oxygen carrier (OCN717-R1SU) for chemical looping combustion (CLC) have been investigated using TGA by changing gas concentration (10-30 vol.% $CH_4$) and reaction temperature ($825-900^{\circ}C$). Reaction rate of OCN717-R1SU increased as temperature increased and it was found that reaction is delayed at the initial reaction regime. Johnson-Mehl-Avrami (JMA) model was adopted to explain the reaction phenomenon. The activation energy (E) determined by JMA model in reduction reaction of OCN717-R1SU is $151.7{\pm}2.03kJ/mol$ and pre-exponential factor and JMA exponent were also obtained. The parameters calculated in this study will be applied in design of the reactor and operation conditions for CLC process.

• 소성∙가공
• /
• 제26권1호
• /
• pp.48-54
• /
• 2017

The dissolution and precipitation of Nb, which has been known as strong carbide-forming element, play a key role in controlling phase transformation kinetics of microalloyed steels. In this study, we analyzed both numerically and experimentally the precipitation behavior of Nb-microalloyed steel and its effect on the austenite decomposition during cooling. Nb precipitation in austenite matrix could be predicted by the thermo-kinetic software MatCalc, in which interfacial energy between precipitate and matrix is calculated. The simulated precipitation kinetics fairly well agrees with the experimental observations by TEM. Austenite decomposition, which is strongly affected by Nb precipitation during cooling, was measured by dilatometry and was modeled on the basis of a Johnson-Mehl-Avrami-Kolmorgorov(JMAK) equation. It was confirmed that the dissolved Nb delays the austenite decomposition, whereas, the precipitated Nb accelerates phase transformation during the austenite decomposition.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1068-1074
• /
• 2014

구운떡 제조 시 설탕과 식용유의 말티톨 대체에 따른 품질 특성 변화를 조사하기 위하여 말티톨 첨가 비율별 구운떡의 물성, 색도 및 기호도 조사를 실시하였다. 물성 측정 결과 경도는 대조군에 비해 말티톨 첨가 비율이 증가할수록 26.80에서 20.92로 감소하였고, 부착성은 증가하여 부드럽고 찰기 있게 나타났다. 색도의 경우 명도는 말티톨 5%군이 가장 높았으며 말티톨 첨가 비율이 증가함에 따라 감소하는 경향이었다. 대조군에 비해 말티톨군의 적색도는 증가하였고 황색도는 감소하여 ${\Delta}E$값에서 뚜렷한 차이가 발생하였다. 관능검사 결과는 말티톨군이 외관, 촉촉함, 쫄깃함, 경도에서 유의적으로 높게 평가되었으며, 전반적인 기호도는 말티톨 10%군에서 높았다. 대조군과 말티톨 10% 첨가군을 실온 저장하면서 색도와 물성의 변화를 분석한 결과, 저장기간에 따른 색도의 변화(${\Delta}E$값)는 저장 1일차 대조군 2.51, 말티톨군 1.77로 대조군이 더 컸으나 2일차부터는 말티톨군의 차이가 더 컸다. 저장기간 중 물성의 경우 대조군은 1일차까지만 측정 가능하였으나 말티톨군은 3일째에도 측정 가능하였고, 경도의 경우 대조군은 1일차에 두 배 가량 증가하였으나 말티톨군은 저장 0일 20.92에서 저장 3일 28.97로 완만하게 증가하였다. Avrami kinetics에 적용한 결과는 Avrami 지수(n)에서 대조군 2.418, 말티톨군 2.098로 말티톨군이 낮게 나타났고, 시간상수(1/k)는 대조군 43.860, 말티톨군 60.976으로 말티톨군이 높게 나타나 대조군에 비해 말티톨 10% 대체 첨가에 의한 노화 지연 효과를 확인하였다. 이러한 결과 구운떡 제조 시 말티톨 10% 첨가는 물성, 색도, 관능적인 품질 및 저장성 향상에 도움을 줄 수 있을 것으로 생각된다.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.161-166
• /
• 2005

Fresnoite($Ba_2TiSi_2O_8$)결정을 갖는 $xK_2O-(33.3-x)BaO-16.7TiO_2-50SiO_2(mole\%)$ 유리조성에서 BaO를 $K_2O$로 대체함에 따른 유리화, 열적특성 및 결정화 거풍에 관하여 관찰하였다. x(0$\le$x$\le$20)의 함량이 증가함에 따라 유리화가 용이하였으며, 유리 전이온도 및 결정화 온도가 저온부로 이동하였다. $Ba_2TiSi_2O_8$결정상의 생성을 XRD분석을 통하여 확인하였으며, x의 함량증가가 이질상의 생성과는 무관함을 보였다. 결정화 거동을 DTA를 이용한 비등온법에 의하여 조사하였으며, x의 함량증가에 따라 avrami 지수(n)가 $2.26 {\pm}0.1,\;2.03 {\pm}0.1,\;1.93{\pm}0.15$로, 활성화 에너지는 약 $279 {\pm}12kJ/mole,\;302{\pm}7kJ/ mole,\;319{\pm}1kJ/mole$ 로 변화하였으며, SEM분석결과 x의 함량 증가 시 결정의 방향성이 두드러짐이 관찰되었다.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.261-266
• /
• 2015

The capacity of passive metal to repassivate after film damage determines the development of local corrosion and the resistance to corrosion failures. In this work, the repassivation kinetics of 316L stainless steel (316L SS) was investigated in borate buffer solution (pH 9.1) using a novel abrading electrode technique. The repassivation kinetics was analyzed in terms of the current density flowing from freshly bare 316L SS surface as measured by a potentiostatic method. During the early phase of decay (t < 2 s), according to the Avrami kinetics-based film growth model, the transient current was separated into anodic dissolution ($i_{diss}$) and film formation ($i_{film}$) components and analyzed individually. The film reformation rate and thickness were compared according to applied potential. Anodic dissolution initially dominated the repassivation for a short time, and the amount of dissolution increased with increasing applied potential in the passive region. Film growth at higher potentials occurred more rapidly compared to at lower potentials. Increasing the applied potential from 0 $V_{SCE}$ to 0.8 $V_{SCE}$ resulted in a thicker passive film (0.12 to 0.52 nm). If the oxide monolayer covered the entire bare surface (${\theta}=1$), the electric field strength through the thin passive film reached $1.6{\times}10^7V/cm$.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.397-400
• /
• 1999

We have fabricated BSCCO 2223 by modified two powder process and investigated 2223 phase formation and grain growth. Phase evolution and reactivity of 2223 were remarkably sensitive to size of 2212 grains and liquid phase. Larger size of 2212 phase increased liquid formation temperature. The Avrami relation was well suited for describing the kinetics of grain growth in BSCCO 2223.