• 제목/요약/키워드: Avionics Cooling

검색결과 4건 처리시간 0.021초

전투기 외장 포드용 ACM의 성능 시험평가 (Performance Test and Evaluation of ACM for Fighter's External POD)

  • 백승윤;서자원;송덕희;김경수;홍재표;박성순
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.527-530
    • /
    • 2010
  • 전투기에 장착되는 정보수집용 포드의 냉각 장치인 ACM에 대한 성능 시험평가를 수행하였다. 시험평가 대상인 ACM은 역 브레이튼 공기 사이클로 작동되는 터보기기로서, 항공기의 비행속도에 의한 램 공기를 에너지원으로 사용하여 추가적인 에너지의 공급 없이 냉각 기체를 발생시킨다. 또한 습기에 민감한 전자장비의 냉각에 이용하기 위하여 열교환기를 함께 구성하였다. 성능시험을 통하여 개발 대상 ACM 및 열교환기는 요구 성능을 만족함을 확인하였다.

  • PDF

저탄장 자연발화 방지를 위한 압력용기의 응력 해석 (A Stress Analysis for Pressure Vessel to Prevent Spontaneous Ignition of Coal Stockpile)

  • 김영인;김승훈;지민석;염찬섭;최원혁
    • 한국항행학회논문지
    • /
    • 제22권3호
    • /
    • pp.205-212
    • /
    • 2018
  • 자연발화의 문제는 심각한 경제적 손해뿐만 아니라 화재 시 발생하는 유해가스로 인해 환경오염을 발생시키는 대표적인 발전소 피해이다. 저탄장 자연발화 예방 및 조치하기 위해 드론을 이용하는 방법이 제시되었으나 외부의 측풍과 외란으로 인한 2차 사고의 발생위험이 존재하는 상황이다. 자연발화의 원인과 영향 인자는 매우 복잡하기 때문에 사전에 예방하기가 쉽지 않으며 일단 발생하면 소화하기도 어렵다. 따라서 저탄장 내부에서 직접적으로 온도 및 상태를 측정하고 자연발화 지점에 직접적으로 냉각 가스를 분출하여 소화하는 장치가 필요하다. 본 연구는 저탄장의 자연발화를 예방하기 위한 냉각볼 장치의 내부 압력과 외부 압력에 대하여 구조해석을 실시하고 구조적 안전성에 대하여 연구한다.

Influence of fin partitioning of a Rayeigh-Bénard cavity at low Rayleigh numbers

  • Zilic, Adis;Hitt, Darren L.
    • Advances in aircraft and spacecraft science
    • /
    • 제5권4호
    • /
    • pp.411-430
    • /
    • 2018
  • This computational study examines the augmentation of classic 2-D Rayleigh-$B{\acute{e}}nard$ convection by the addition of periodically-spaced transverse fins. The fins are attached to the heated base of the cavity and serve to partition the cavity into 'units' with different aspect ratios. The respective impacts upon heat transfer of the fin configuration parameters - including spacing, height, thickness and thermal conductivity - are systematically examined through numerical simulations for a range of laminar Rayleigh numbers (0 < Ra < $2{\times}10^5$) and reported in terms of an average Nusselt number. The selection of the low Rayleigh number regime is linked to likely scenarios within aerospace applications (e.g. avionics cooling) where the cavity length scale and/or gravitational acceleration is small. The net heat transfer augmentation is found to result from a combination of competing fin effects, most of which are hydrodynamic in nature. Heat transfer enhancement of up to $1.2{\times}$ that for a Rayleigh-$B{\acute{e}}nard$ cavity without fins was found to occur under favorable fin configurations. Such configurations are generally characterized by short, thin fins with half-spacings somewhat less than the convection cell diameter from classic Rayleigh-$B{\acute{e}}nard$ theory. In contrast, for unfavorable configurations, it is found that the introduction of fins can result in a significant reduction in the heat transfer performance.

2차원 파형 채널의 형상변화에 따른 열유동 특성 (Thermo-Hydraulic Characteristics of Two-Dimensional Wavy Channels with Different Shape Parameters)

  • 김기완;김선주
    • 대한기계학회논문집B
    • /
    • 제38권1호
    • /
    • pp.1-8
    • /
    • 2014
  • 본 연구에서는 2차원 파형 채널의 여러 형상($0.5{\leq}{\in}{\leq}1.5$, $0.1{\leq}{\gamma}{\leq}0.4$)에 대한 층류 열유동 수치해석을 수행하고, 형상변화에 따른 열유동특성을 비교 분석하였다. 전자장비 냉각용으로 적용되고 있는 PAO(Polyalphaolefin)를 작동유체로 고려하였고, 균일한 물성치와 주기적으로 발달한 유동 및 채널벽면에서의 등온 조건을 가정하였다. 층류유량조건($1{\leq}Re{\leq}1000$)에서 레이놀즈수에 따른 유선 및 온도 분포, 등온 Fanning 마찰계수, Colburn 계수를 제시하였고, 분석 결과 낮은 레이놀즈(Re<50) 구간에서는 채널주름비가 크고 채널간격비가 작을수록, 높은 레이놀즈($Re{\geq}50$) 구간에서는 채널주름비와 채널간격비가 모두 클수록 열전달이 향상되었다.