• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.465-472
• /
• 2015

In order to improve the performance of TCAS it should improve the performance of the sensor, which transmits a variety of information. In this paper, To improve the performance of the existing radar sensors such as being used in behalf of the next generation air traffic control system, ads-b the applied. In addition, ADS-B in a high precision by using information from the correction GPS system, SBAS assume would be able to apply an improved location accuracy for TCAS and analyzed TCAS and ADS-B. Played the simulation results, TCAS equipment receives the help of these ADS-B can calculate a CPA to determine the position of the aircraft in advance, and it was confirmed that it is possible to reduce the unnecessary RA operation, also, the pilot reduction and the workload, it has advantages such as fuel consumption and time associated with the reduced operation unnecessary RA was confirmed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.167-174
• /
• 2016

Runway and taxiway is base facilities for aircraft take off and landing and runway capacity is one of major factor for airport capacity. Runway occupancy time is affect on the runway capacity. The identification of aircraft using taxiway by analysis of airport ground surveillance data and the measurement of pass time on the points is general method for the confirmation of the runway occupancy time. This study is runway occupancy time analysis of landing airplane using ADS-B message, in this study we surveyed landing aircraft runway occupancy time and analysis of serviced record using taxiway include rapid exit taxiway. The result of analysis is to confirm the different of landing direction and aircraft category on the same runway caused by structure of airport. Also the result of runway occupancy time analyzed data, it is base input data for the air transportation simulation.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.379-388
• /
• 2015

In the end of 1990's, future free flight technology had been developed and tested in America and government established the plan for free flight until 2017. Aircraft separation assurance must be secured essentially to avoid collision between aircrafts before Free Flight comes true. Now, Civil aircraft has rules about avoidance activity with traffic collision avoidance system (TCAS) but it can't apply to light aircraft. So there is a need about alternative method to apply light-aircraft because it has space and price problem to use TCAS. In this paper, TCAS algorithm has been modified and verified by simulating with LABVIEW program under ADS-B condition to get miniaturization and weight lighting cheaply. By simulating, collision alert algorithm is analyzed and verified with collision situation proposed by ICAO, and 100% checked for performing the alert announciation on all cases by TCAS standards.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.33-40
• /
• 2015

Advanced surface movement guidance and control system (A-SMGCS) is a system providing routing, guidance and surveillance for the control of aircraft and vehicles in order to maintain the predetermined surface movement rate under all weather conditions while maintaining the required level of safety. In the present study, system engineering was introduced to develop the compliance procedure for the A-SMGCS. At first, requirements for the level IV A-SMGCS were defined and analyzed from the concept of operations (CONOPS). Then, system architecture and specifications were constructed through the functional analysis and allocation. After that, work breakdown structure (WBS) and related integrated master schedule (IMS) were established. Lastly, compliance checklist (CCL) and test and evaluation master plan (TEMP) were developed to verify and validate the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.355-358
• /
• 2016

Recently, As the interest of the drone has increased the fields such as broadcasting, disaster site and leisure which uses the drone has been constantly expanded. However, an invasion of a person's privacy and a threat of hacking attack also have increased as population of drone. High-resolution cameras mounted on drones can take a photo or real-time video anytime and anywhere. It causes the invasion of privacy from private houses, buildings, and hotels. In this paper, we perform a security vulnerability assessment tests on the camera's from common commercial drones and we propose the countermeasures to protect the drones against unauthorized attacker who attempts to access the drone's camera from internal or external. Through this research, we expect the Aviation Act and legislation accept the concept of security and provide the polices such as drones equipped with security devices from the production stage to promote drone industry.

• Carbon letters
• /
• v.18
• /
• pp.18-23
• /
• 2016

Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.116-122
• /
• 2015

Motivated by continuous increase in flight demand, awareness of the importance in developing ways to increase aircraft operational efficiency on the airport movement area has been raised. This paper proposes a new routing algorithm for providing the shortest path in a right time, enhancing the aircraft movement efficiency. Many researches on developing algorithms have been performed, for example, Dijkstra algorithm and $A^*$ algorithm. The Dijkstra algorithm provide optimal solution but could possibly provide it with a cost of relatively longer computation time. On the other hand, $A^*$ algorithm does not guarantee the optimality of a solution. In this paper, we suggest a Hybrid $A^*$ algorithm, incorporating both algorithms to eliminate the weaknesses. Rigorous test shows the proposed Hybrid $A^*$ algorithm may achieve shorter computing time and optimality in searching the shortest path.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.3-36
• /
• 2015

As of end of 2014, the population engaging in aviation activities for leisure has reached approximately 13 million, where approximately 356 cases involve a general aircraft, 200 cases involve light aircraft, and 636 cases involve an ULM. The industry for leisure has become a very promising industry in line with rapidly rising living standards which are expected to further increase in the future. The demand for such services is expected to increase over time. The purpose of this paper is to review the development and site selection of airfields in anticipation of these developments in the industry. While the government also has experience in the review of airfield location and candidate sites, it is not the government that carries out the actual construction. As such, the feasibility of the site needs to be verified in terms of actual construction. This study identified factors for Site Selection of factors through a review of related documents and existing research reports. A questionnaire was also used to collect the views of experts in the field, which was then analyzed. The Research model was confirmed in the layered form for an AHP analysis. The factors for Site Selection were identified as the technical / operational factors and economic / political elements for a two-stage configuration. The third step consisted of technical and operational elements. The final step is was constructed a total of 11 elements (weather, surface conditions, obstacle limitation surface, airspace conditions, operating procedures, noise problems, environmental issues, availability of facilities, construction and investment costs, contribution to the local economy, accessibility, demand / the proximity of demand). The surveys are conducted for more than 10 General and light aircraft pilots, professionals, and instructor. The analysis results showed a higher level in the technical / operating elements (73.2%) in the first step, while the next step sawa higher level of the operational elements (30.9%) than the other. The factors for Site Selection were any particular elements did not appear high, the weather conditions (17.5%), noise problems (19.8%), the proximity of demand (6%), accessibility (5.7%), environmental issues (11.1%), availability of facilities (8%), airspace conditions (7.9%), obstacle limitation surface (12%), construction and investment costs (4.2%) and to operating procedures (4.9%), contribution to the local economy (3.8%).

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.147-153
• /
• 2017

The main subject of year 2016 Davos forum was "The 4th Industrial Revolution." Recently, interests and investment in drone market, so called industrial revolution in the sky is growing in many countries around the world. Before, drone was used for military purpose such as reconnaissance or attacking but today, it is used in various private sectors such as unmanned delivery service, agriculture, leisure activities, etc. Presently, many major countries in the world are already involved in the 'war without gunfire' to be dominant in this drone industry. Korean government also has announced an extreme relaxation of regulations for growing drone industry by opening a conference with Ministers related to economics. During the conference, business scope of drone which was limited to agriculture, photographing, and observation was expanded to all the fields except for cases hindering national safety and security. In terms of shooting purpose drone its process of receiving approval for flight and shooting is simplified to online registration. What is more, drone delivery service will be allowed in island areas such as Goheung, Yeongwol, etc from first term of year 2017. Finding the way to apply drone in criminal investigation is also speeding up. Recently, Public Safety Policy Research Center in Korean National Police University has inquired for research service and its result will be out around November. Likewise, although more and stronger foundation for supporting drone industry is made but there are still, some opinions saying that we should take a careful approach in consideration to the side effect such as abuse in crime. One may also try terror by placing a dangerous substance. If drone falls, it may hurt any civilians. Moreover, if shopping purpose drone is hacked, it may result in violation of privacy. Compared to America, Europe, and China, we are at the very beginning stage of drone industry and it is necessary to reorganize legal issues to grow this industry. This can be thought from two perspectives; first, the growth of drone industry is blocked by difficult regulations on Aviation Law and Radio Regulation Law. The second issue is the safety and privacy that are required for operating drone. For the advanced technologies to make human life more profitable, more active and proactive actions are required by criminal law side. In preparation to the second mechanical era where man and machines should go together, I hope that responsible preparation is required in all fields including the criminal law.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.227-260
• /
• 2018

Recently, as the use of drones increases, the risk of drone accidents and third-party property damage is also increasing. In Korea, due to the recent increase in drone use, accidents have been frequently reported in the media. The number of reports from citizens, and military and police calls regarding illegal or inappropriate drone use has also been increasing. Drone operators may be responsible for paying damages to third parties due to drone accidents, and are liable for paying settlements due to illegal video recording. Therefore, it is necessary to study the idea of providing drone insurance, which can mitigate the liability and risk caused by drone accidents. In the US, comprehensive housing insurance covers damages caused by recreational drones around the property. In the UK, when a drone accident occurs, the drone owner or operator bears strict liability. Also, in the UK, drone insurance joining obligation depends on the weight of the drones and their intended use. In Germany, in the event of personal or material damage, drone owner bears strict liability as long as their drone is registered as an aircraft. Germany also requires by law that all drone owners carry liability insurance. In Korea, insurance is required only for "ultra-light aircraft use businesses, airplane rental companies and leisure sports businesses," where the aircraft is "paid for according to the demand of others." Therefore, it can be difficult to file claims for third party damages caused by unmanned aerial vehicles in personal use. Foreign insurance companies are selling drone insurance that covers a variety of damages that can occur during drone accidents. Some insurance companies in Korea also have developed and sell drone insurance. However, the premiums are very high. In addition, drone insurance that addresses specific problems related to drone accidents is also lacking. In order for drone insurance to be viable, it is first necessary to reduce the insurance premiums or rates. In order to trim the excess cost of drone insurance premiums, drone flight data should be accessible to the insurance company, possibly provided by the drone pilot project. Finally, in order to facilitate claims by third parties, it is necessary to study how to establish specific policy language that addresses drone weight, location, and flight frequency.