• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.19-28
• /
• 2003

The limitation on the dynamic range improvement of the complementary correlation optical time domain reflectometer(CCOTDR) is presented. In CCOTDR, the improvement of dynamic range is function of both the averaging number of measurement cycles and the length of codes. The trade off between the averaging number and the code length restricts the improvement of the dynamic range and a very long code is not effective to improve the dynamic range. In this paper, the improvement limitation on dynamic range caused by the trade off between the averaging number and the code length is presented. For derivation of the trade off, the number of one measurement cycles employing a conventional single pulse method and employing a complementary code method are presented and compared. And the effective maximum code length is presented in addition.

• Smart Structures and Systems
• /
• v.5 no.1
• /
• pp.69-79
• /
• 2009

A non-clipped semi-active stochastic optimal control strategy for nonlinear structural systems with MR dampers is developed based on the stochastic averaging method and stochastic dynamical programming principle. A nonlinear stochastic control structure is first modeled as a semi-actively controlled, stochastically excited and dissipated Hamiltonian system. The control force of an MR damper is separated into passive and semi-active parts. The passive control force components, coupled in structural mode space, are incorporated in the drift coefficients by directly using the stochastic averaging method. Then the stochastic dynamical programming principle is applied to establish a dynamical programming equation, from which the semi-active optimal control law is determined and implementable by MR dampers without clipping in terms of the Bingham model. Under the condition on the control performance function given in section 3, the expressions of nonlinear and linear non-clipped semi-active optimal control force components are obtained as well as the non-clipped semi-active LQG control force, and thus the value function and semi-active nonlinear optimal control force are actually existent according to the developed strategy. An example of the controlled stochastic hysteretic column is given to illustrate the application and effectiveness of the developed semi-active optimal control strategy.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.239-240
• /
• 2019

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.132-138
• /
• 2009

In this paper, we propose a novel approach to improve the performance of minima controlled recursive averaging (MCRA) which is based on the second-order conditional maximum a posteriori (CMAP). From an investigation of the MCRA scheme, it is discovered that the MCRA method cannot take full consideration of the inter-frame correlation of voice activity since the noise power estimate is adjusted by the speech presence probability depending on an observation of the current frame. To avoid this phenomenon, the proposed MCRA approach incorporates the second-order CMAP criterion in which the noise power estimate is obtained using the speech presence probability conditioned on both the current observation and the speech activity decisions in the previous two frames. Experimental results show that the proposed MCRA technique based on second-order conditional MAP yields better results compared to the conventional MCRA method.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.152-154
• /
• 2009

태양광발전 시스템에서 사용되는 컨버터는 기존의 입출력 관계로 모델링할 수 없다. 이는 태양광 전지를 컨버터의 입력단으로 사용하여, 모델의 입력 전류와 전압이 수시로 변동하기 때문이다. 이런 오류가 있는 방법으로 모델링하여 설계한 제어기가 좋은 성능을 내기는 어렵다. 본 논문에서는 기존의 입출력 관계를 반대로 한 벅 컨버터의 새로운 모델을 제시한다. 모델링은 상태공간평균화 방법(State-Space Averaging Method)을 사용하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.3
• /
• pp.141-145
• /
• 1977

In this paper, approximate solutions of the von Karman equations for the free flexural vibration of a transversely isotropic thin rectangular plate with two simply supported edges and two clamped edges are obtained. Applying one term Ritz-Galerkin procedure, the spatial dependent part of the equation is separated and time dependent function is found to be the Duffing's equation. Then the relation between nonlinear period and amplitude of the vibration is obtained by using averaging method which is a method of the perturbation procedure. It can be seen that averaging method is easy and agrees well with prior results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.18-26
• /
• 2006

In this paper, we propose new beamforming algorithm which overcomes signal cancellation effect even high cross correlation existing between target and interfering signal. Using the proposed method, we show that direction of arrival (DOA) of interfering signal can be estimated using correlation matrix and the cross-correlation can be eliminated in the correlation matrix of input signal. The proposed method gives high performance enhancement compared with the spatial averaging method in our computer simulation results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.84-89
• /
• 2014

Data-driven method for fault diagnostics system often use machine learning technique. To use such technique proper signal processing should be implemented such as time synchronous averaging (TSA) for ball bearing systems. However, for journal bearing diagnostics systems not much has been researched, and yet a proper signal processing method has not been studied. Therefore, in this research an optimal datum unit for a reliable journal bearing diagnostics system along with angular resampling process is being suggested. Before extracting time and frequency domain features, angular resampling is applied to each cycle of vibration data. As to preserve the characteristics of vibration signal, averaging method is replaced by finding the optimal datum unit which strengthens statistical characteristics of vibration signal. Then 20 features were extracted for various cases, and those features are being evaluated by two criteria, separability and classification accuracy.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.262-265
• /
• 2012

In this paper we propose a new deinterlacing method with block classification and motion vector smoothing. The proposed method classifies a block, then depending on the region it belongs to, the motion estimation or line averaging is applied. To classify a block its variance is calculated. Then, for those blocks that belong to simple non-texture region the line averaging is done while motion estimation is applied to complex region. The motion vector field is smoothed using median filter what yields more accurate interpolation. In the experiments for the subjective evaluation, the proposed method bas shown satisfying results in terms of computation time consumption and peak signal-to-noise ratio. Due to the simplicity of the algorithm computation time was drastically decreased.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.123-126
• /
• 1995

The purpose of this paper is to improve ultrasound images using motion estimation and recursive filtering. Although averaging without motion correction can make image blurring, the proposed estimation method improves image SNR without motion blurring by recursively averaging images with motion correction. Computer simulation on the proposed method has been performed to improve phantom and ultrasound fish images and the results show the utility of the proposed method.