• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.2
• /
• pp.1-14
• /
• 1989

The purpose of this study was to develop the principle of space composition in Jungja of a category of korean traditional space. The results which analyzed outside space, prospect angle and preference factors for landscape with making, Jungja which has artificially constructed pond within Gyeongbug province, the subject of study were as fellows ; Size of pond was quite different in each Jungja, and its form was retangular. There was built circle island or figured ten-long life within pond. These pursued harmony of the cosmic dual force or eternal youth. Average angle of depression and horizontal angle from floor of Jungja to pond were respectively 16$^{\circ}$ 23', 48$^{\circ}$ 26'. Average angle of depression to island in pond was 13$^{\circ}$28'. Average angle of depression from floor of Jungia to wall was 2$^{\circ}$58'. With controlling height of wall, there was maintained privacy and used borrowed landscape. Tree within garden was mainly planted a deciduous tall tree, the important species of tree were bamboo, pomegranate tree, crape myrtle, etc. Variables that gave influence on landscape preference degree were things about tree and pond. On prospecting pond, these variables-feeling for shore protection, impression for water, visual depth to pond feeling for shore protection, impression for water, visual depth to pond-gave Largely influences.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.279-282
• /
• 2012

This study attempted to the effect on the physical performance of silane coupling agent on solventless epoxy-based concrete surface finishing material for parking floor. Tests were carried out in accordance with KS F 4041 and KS F 4937. The results of compressive strength, flexural compressive are 95.6N/㎟, 25.4N/㎟ and after wheel moving load testing, average abrasive depth is 0.96mm, these results satisfied the quality standard of KS F 4041, KS F 4937. As conclusion, this study confirmed that the silane coupling agent greatly effected on the physical performance of solventless epoxy resin.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.283-286
• /
• 2005

This study measures the levels of various receiving points for reducing deviations the floor impact sound. According to the results, 63-125Hz band appeals the large deviations. Among the spacial points, the spot of 0.75m from the wall correspond with the average of all spots. The KS stipulates that the receiving point should be off the wall more than 0.5m But obeying the rules, the large deviation appears. So, this study shows that the adequate receiving point is 0.75m from the wall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.308-311
• /
• 2004

It is reported that there is a limit in increasing heavy-weight impact noise isolation performance of the load bearing wall system apartments to meet the regulation of the Ministry of Construction and Transportation (MOCT). To increase the heavy-weight impact noise isolation performance, improvement in structural systems such as increasing concrete slab thickness and application of rahmen structure were proposed. In this study floor impact sound levels from toil apartments with two rahmen structure multi-story residential buildings were measured before the construction of the buildings finished. Measurements were made at living room and two bedrooms at each apartment when the finishing processes were finished. The average value of light-weight impact sound level from ten apartments was 56dB (L'$\sub$n,Aw/). The heavy-weight impact sound level was 44dB (L'$\sub$i.Fmax.Aw/) and the impact sound level of the impact ball was 41dB(L'$\sub$i.Fmax.Aw/), As a result floor impact noises at the rahmen structure system were lower than the regulation level.

• Journal of the Korean housing association
• /
• v.11 no.3
• /
• pp.99-107
• /
• 2000

The purpose of this study was to identify the universal design characteristics in residential environments. The subjects were 135 physically disabled persons who lived in the rental multi-family housing apartments in Pusan. Interview method was used for this study. They were an average age of 51 years and 63% were male. They were low income families and lived in 12 pyung ($39.75\textrm{m}^2$) apartments. They were asked about what housing characteristics were constraints in their daily living. They pointed out that the constraints in their apartments were as follows: 1) the small amount of space in the bathroom, kitchen, bedroom, and the entrance area of housing unit, 2) the unflat floor level between the bathroom and the hallway, or the balcony and the bedroom, 3) the slippery floor finish in the bathroom, 4) lack of grab bars or handrails in the bathroom and the ramp, 5) the kitchen work centers and the electric switches at improper height, and 6) the steep ramp. Therefore, the universal design characteristics in residential environments were the adequate amount of space, flat floor level, non-slippery floor finish, grab bars or handrails, accessible height, and ramp.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.125-130
• /
• 2008

The new apartments has been rapidly built through the outskirts of Cheong-ju city since the latter half of 1980's. So, the population decreased in Seong-an dong and Jung-ang dong which are located in traditional urban area of Cheong-ju. Also, residential areas became obsolete and residential buildings happened to be vacant and empty. For urban rehabilitation, the city authorities will construct the high-rise complex housings with stores in the traditional urban area. We have doubts about whether the rapid change of new housing construction is right or not. Therefore, It is necessary to give a correct diagnosis of the present state from urban atrophy, keeping this area sustainable with traditionality and locality. This study is to examine and analysis in detail distribution patterns and habitable floor area by house types in Seong-an dong and Jung-ang dong which are located in traditional urban area of Cheong-ju. The result are as follows; the residential buildings as the 2,680 houses(including detached and apartment houses) and the 804 shop houses are distributed with 3,484(67%) of the whole 5,183 buildings and form 28percent of the whole floor areas. A distribution and area ratio of houses to shop houses is irrespectively about 76 : 24percent. The average floor area is represented with $66m^2$/household and $28.5m^2$/person. It shows that a hollowing out of urban area has caused the surplus of residential buildings and floor areas.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.37-46
• /
• 2004

In order to investigate the effect of floor condition on the fattening performance of cattle, sixteen finishing Hanwoo steers of weighting 570kg were fed for 16 weeks to slaughter on two types of sawdust bedding pen oriented to the south(SP) and the north(NP) then obtained following results. The floor condition of SP roofed by transparent material was dry and flat during overall experimental period, whereas, that of NP roofed by solid slate was muddy and rough even in summer and fall, and then frozen in winter period resulted in interfering with the locomotion and resting behavior of steers. Average daily dry matter intake of steers was not different between tow treatments, however, the average daily gain of steers in NP and SP was 0.64kg and 0.75kg, respectively, meaning that gained 14.3% less for the NP group(p<0.05), accordingly, feed requirement(feed/gain) and TDN/gain increased by 15.9% and 15.5%, respectively. No significant differences were found in slaughter weight, carcass weight, dressing percentage, meat yield index and meat quality traits between two treatments. In conclusion, this study revealed that poor floor condition of feeding pen could decrease weight gain and feed efficiency of cattle by increasing energy consumption for locomotion and conductive energy loss while resting on the floor surface. These results indicates that housing orientation of cattle shed and the selection of roof material are important factors in beef cattle production.

• Journal of the Korean Home Economics Association
• /
• v.33 no.5
• /
• pp.63-73
• /
• 1995

Absolute poverty is redefined as biological existence level poverty and relative poverty is also redefinded as 'the state that relatively insufficient compared to the specific society's average living standard under the condition that basic needs on the biological existence level has been satisfied.' Then absolute poverty and relative poverty lies on the same welfare continuum. Therefore these two can be regarded as one unified concept. Theoretical bottom line of poverty is the biological existence level and ceiling is average income. Poverty line for the social policy is to be drawn between ceiling and floor. Using these standard lines three poverty bands are categorized : minimum subsistence level, minimum decency level.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.125-131
• /
• 2014

The purpose of this study is to investigate the effect of high quality CPR using the 4 types of rescue device equipment and chest compressions energy measurement in pre-hospital settings. So, we used the mode to insert load cell in ALS Skill master Manikin to develop CFMM(Compression Force Measurement Manikin) on main stretcher, CPR board, long spine board, scoop stretcher and floor. And, our research team could know that the main stretcher needed average force of 32.55 (${\pm}1.01$) kg, CPR board of 27.23 (${\pm}1.08$) kg, long spine board of 27.13 (${\pm}1.18$) kg, Scoop Stretcher of 27.38 (${\pm}1.05$) kg and Floor of 27.24 (${\pm}0.93$) kg. CPR board must be necessary in the case of CPR on main stretcher in a moving ambulance. But if the condition of patient's back surface is the removable stretcher and the long spine plate, the patient doesn't have to be spent time to use a CPR board. Furthermore, this research suggests to consider that how to take advantage of the education to students for the equipment to check in real time the energy(kg) requirement of chest compressions.

• The Journal of the Korean dental association
• /
• v.48 no.3
• /
• pp.205-217
• /
• 2010

Purpose The aim of this study is to evaluate the survival rates and analyze the stability of lateral approach and trans-crestal approach for maxillary sinus floor elevation of simultaneous implant placement. Materials and method 407 patients who have been treated in LivingWell dental hospital between 2003 to 2009 were selected. Lateral window technique, osteotome technique and sinus drill technique were used for sinus floor elevation procedure. A total of 714 implants-MP-1 HA coated implant(Tapered Screw $Vent^{TM}$, $Spline^{TM}$, Zimmer, USA), FBR surfaced implant(Pitt-$Easy^{TM}$, Oraltronics, Germany)-were placed in grafted maxillary sinus simultaneously. The autogenous bone or a combination with the allograft or alloplast was grafted into sinus. Sinus floor elevation was combined with vertical/horizontal onlay bone grafts to reconstruct the defect of alveolar ridge. Results The average preoperative height of the maxillary alveolar bone was 5.78mm(range: 0.4mm~12.5mm). 14 implants failed during the healing period(lateral approach: 4, trans-crestal approach: 10) and 3 implant failed after prosthetic loading(lateral approach: 2, trans-crestal approach: 1). The cumulative survival rate of implants after 6 years was 97.6%. Trans-crestal approach(97.4%) and lateral approach(97.9%) had similar survival rates. Conclusion The results indicate that the trans-crestal approach and lateral approach for maxillary sinus elevation is a acceptable method at atrophic maxillary posterior area.