• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.185-197
• /
• 2000

This study was carried out to research structure of forest vegetation and site condition, and supply basic data for conservation of pine forest and ecologically sustainable forest management and control in Anmyondo area. The forest of Anmyondo were largely classified as four forest community : Pinus densiflora community, Pinus thunbergii community, Pinus rigida community, and Quercus variabilis community. Organic matter, total nitrogen, and other nutrients in soil of the study area were relatively low, and average soil pH was 4.9. Soil texture was sandy clay or heavy clay and so the aeration and permeability could be poor. In this study site, the methods such as the promotion of germination of pine seeds through removal of forest floor and inducement of natural regeneration through such method as regeneration under shelter wood would be better than the method such as afforestation after clear-cutting for conservation the pine forests. Also, it will be a good method to practice tending for hardwood species in the dominant areas by hardwood species.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.194-199
• /
• 2017

When sea tide and wave velocity change, the behavior of silt protectors underwater changes, and a hydraulic force exceeding the anchor wave force is applied. In this study, the movement mechanism of a silt protector has been analyzed using the mass-spring method. The initial position of the silt protector was in the Jindo area near Gwangpo Port (742-1, Gyupori, Chongdo-myeon, Jindo-gun, Jeonnam, Korea). The tension required to exceed the holding power of the anchor was 0.05 m/s at 318 sec., 0.15 m/s at 77 sec., 0.25 m/s at 43 sec., and 0.3 m/s at 37 sec.. As the anchor started to move from the sea floor and the tide speed increased to 0.01 m/s, anchor movement start time shortened by an average of 11.2 sec.. Compared with when tide was the only affecting factor, the silt protector and anchor were found to have moved 19.7 % at 0.1 m/s, 7.6 % at 0.15 m/s, 5.8 % at 0.2 m/s, 4.3 % at 0.25 m/s and 2.8 % at 0.3 m/s, showing an increase. When wave effect was added to the tide, anchor movement started when the flow rate was slow 7.6 % of the time. With a high flow velocity, anchor movement started without any significant difference less than 4.3 % of the time. When tide speed exceeded 0.13 m/s and the direction of the waves matched, the silt protector was not able to perform due to collisions with surrounding sea structures. When installing a silt protector, the fluid flow situation and the silt protector situation must be carefully analyzed using the mass-spring method to apply the result found in this study.

• Parasites, Hosts and Diseases
• /
• v.33 no.1
• /
• pp.19-26
• /
• 1995

Ecological studies of Aedes togoi, the vector of malayan filariasis, were ci,wind out at Tolsando, Yosu and Sokcho area in 1991. The adult population of Aedes togoi was continuously appeared from the first week of April to the end of November showing the highest density in .truly. The larvae of Aedes togoi were found at rock pools from March to December in Sokcho area and the density was highest in July and August, whereas in the southern coastal area (Yosu), the larvae were found throughout the year and the density was the highest in Tune. The rate of larvae inhabited below 0.5% salinity was 45.7% in Sokcho and 51.7% in Yosu. The feeding activity of Aedes togoi was nocturnal, with the peak period of 01 :00-03:00 hours. Indoor feeding activities were slightly higher than outdoors showing the biting ratio of 1 :0.8 (indoor: outdoor). The average number of Aedes togoi attracted to CO2 gas was 8.5 whereas 117 Anophelei sinensis was attracted. The result indicates that CO2 is not an effective attractant for host seeking of Aedes togoi compared to Anopheles sineteis. The most common place was bedroom with 54.5% of total collections and next to stock place (18.2%), floor(9.1%) and kitchen (9.1%).

• Journal of Biomedical Engineering Research
• /
• v.38 no.2
• /
• pp.74-81
• /
• 2017

The purpose of this study was to investigate the EMG characteristics of driver's upper extremity and driving performance for manipulating brake and accelerator pedal by using left and right hand control devices during simulated driving. The people with disabilities in the lower limb have problems in operation of the motor vehicle because of functional loss for manipulating brake and accelerator pedal. Therefore, if hand control device is used for adaptive driving controls in people with lower limb impairments, the disabled people can improve their quality of life by driving a motor vehicle. Six subjects were participated in this study to evaluate driving performance and muscle activities for operating brake and accelerator pedal by using two different hand controls (steering column mounted hand control and floor mounted hand control) in driving simulator. We measured EMG activities of six muscles (posterior deltoid, middle deltoid, triceps, biceps, flexor carpi radialis, and extensor carpi radialis) during pushing and pulling movement with different hand controls for acceleration and braking. STISim Drive 3 software was used for the performance test of different hand control devices in straight lane course for time to reach target speed and brake reaction time. While pulling the hand control lever toward the driver, normalized EMG activities of middle deltoid, triceps and flexor carpi radialis in subjects with disabilities were significantly increased (p < 0.05) compared to the normal subjects. It was also found that muscle responses of posterior deltoid were significantly increased (p < 0.05) when using the right hand control than left hand control. While pushing the hand control lever forward away from the driver, normalized EMG activities of posterior deltoid, middle deltoid and extensor carpi radialis in subjects with disability were significantly increased (p < 0.05) compared to the normal subjects. It was shown that muscle responses of middle deltoid, biceps and extensor carpi radialis were significantly increased when using the right hand control than left hand control. Brake reaction time and time to reach target speed in subjects with disability was increased by 12% and 11.3% on average compared to normal subjects. The subjects with physical disabilities showed a tendency to relatively slow acceleration at the straight lane course.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.5-9
• /
• 2008

Researchers have investigated many upper bound techniques applicable to error probabilities on the maximum likelihood (ML) decoding performance of turbo-like codes and low density parity check (LDPC) codes in recent years for a long codeword block size. This is because it is trivial for a short codeword block size. Previous research efforts, such as the simple bound technique [20] recently proposed, developed upper bounds for LDPC codes and turbo-like codes using ensemble codes or the uniformly interleaved assumption. This assumption bounds the performance averaged over all ensemble codes or all interleavers. Another previous research effort [21] obtained the upper bound of turbo-like code with a particular interleaver using a truncated union bound which requires information of the minimum Hamming distance and the number of codewords with the minimum Hamming distance. However, it gives the reliable bound only in the region of the error floor where the minimum Hamming distance is dominant, i.e., in the region of high signal-to-noise ratios. Therefore, currently an upper bound on ML decoding performance for turbo-like code with a particular interleaver and LDPC code with a particular parity check matrix cannot be calculated because of heavy complexity so that only average bounds for ensemble codes can be obtained using a uniform interleaver assumption. In this paper, we propose a new bound technique on ML decoding performance for turbo-like code with a particular interleaver and LDPC code with a particular parity check matrix using ML estimated weight distributions and we also show that the practical iterative decoding performance is approximately suboptimal in ML sense because the simulation performance of iterative decoding is worse than the proposed upper bound and no wonder, even worse than ML decoding performance. In order to show this point, we compare the simulation results with the proposed upper bound and previous bounds. The proposed bound technique is based on the simple bound with an approximate weight distribution including several exact smallest distance terms, not with the ensemble distribution or the uniform interleaver assumption. This technique also shows a tighter upper bound than any other previous bound techniques for turbo-like code with a particular interleaver and LDPC code with a particular parity check matrix.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.195-206
• /
• 2017

In situ capping technology for marine sediment pollution control has never been applied in South Korea. In this study a pilot project for the capping was carried out in Busan N Harbor. Pipeline and clamshell capping technologies were implemented for the pollution control. Changes of capping shapes, sediment contamination, and the time and costs required for the two constructions were compared. Both the pipeline and clamshell technologies were found to satisfy the target thickness of 50 cm on average. However, the pipeline method did not operate sensitively in terms of change of the sea floor topography, resulting in an uneven shape and a thickness. Organic carbon and ignition loss quite decreased after the pipeline or the clamshell capping while pH showed no significant change. Organic and residual fraction of Cd, Ni, and Zn in the sediments appeared to decrease after all cappings. The pipeline method took a construction time four times as much as the clamshell method. The clamshell method was demonstrated to reduce the construction cost by about 40% compared with the pipeline method. However, a monitoring for all the parameters needs to be conducted at least two years in order to better evaluate an efficiency of the pollution control by these capping constructions.

• Environmental and Resource Economics Review
• /
• v.19 no.1
• /
• pp.129-157
• /
• 2010

This paper is intended to evaluate energy efficiency policy in demand side, to assess the residential sector's energy efficiency policy and to analyze the system of energy efficiency practices. We examined residential energy consumption over the period 1990~2006. The decomposition method in the analysis was a logarithmic mean Divisia index (LMDI) techniques to decompose changes in energy intensity. First of all, the energy use in residential sector was adjusted to correct weather-induced variations in energy consumption, because adjustments for normal weather patterns facilitated inter-temporal comparison of intensity. The analysis on the residential sector shows that the overall energy intensity of the residential sector declined at an average 1.0% per year, while the structure effect increased by 1.8% per year, and the activity effect increased by 0.7% per year. In other words, the decline of floor space, number of household, and appliance ownership per capita has an effect on increase in residential consumption. The improvement in energy efficiency had strong contribution on the decrease of energy consumption. We find that the general results of analysis on residential energy are similar to those of IEA. The energy efficiency policy in residential sector is assessed to obtain some results during 1990~2006. In residential sector, structural variables such population per household, diffusion of appliance and activity factor such as population contributed to the increase of energy consumption while energy intensity effect induced the decrease of energy consumption. These findings are consistent with international trend as well as our prior expectation.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.363-372
• /
• 2001

The objective of this study was to investigate the site and growth characteristics of dominating Cornus controversa in the hardwood stands at Mt. Gariwang and Mt. Joongwang area located in Pyungchang-gun, Kangwon-do. The C. controversa was mainly distributed at the rather steep slope and aspect facing from northeast to northwest, and altitudes ranging from 800 to 1,100m. The C. controversa grew at relatively deep A soil layer with high moisture and nutrients. Major competing species in upper stories were Quercus mongolica, Acer mandshuricum, Salix hulteni, Acer pictum, and herb plants such as Polystichum tripteron, Dryopteris crassirhizoma, Meehania urticifolia, Pseudostellaria pahbiniana, Ligularia fischeri, Impatiens noli-tangere, Corydalis speciosa in the floor. The average annual diameter growth of C. controversa according to the altitude was $4.06({\pm}0.90)mm$ below 900m, $2.51({\pm}0.65)mm$ from 900 to 1,000m, $3.28({\pm}0.12)mm$ from 1,000m to 1,100m and $2.81({\pm}0.35)mm$ above 1,100m. Good annual growth was shown at northwest site, but no difference due to micro-topography.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2002

We invented the newly developed Fractionated Stereotactic Radiotherapy(F.S.R.T) system using combined techniques of couch mounting and pedestal mounting system. Head fixation frame consists of a milled alluminium alloy(duralumin) and is placed to the couch. This frame immobilized patient head using the dental bite, 3.2 mm frontal and occipital thermoplastic mask. To evaluate the coordinate of target isocenter, Brown-Revert-Walls C.T localizer can be attached to this frame. And also, we developed the frame mounting system by developing the modification of pedestal mounting system. This system is fixed to couch floor and can be used to evaluate the isocenteric accuracy of gantry, couch and collimator in Q.A procedure. In order to measure the relocation accuracy, the acrylic phantom and the accurate pointers have been made. The repositioning of the targets in the phantom were estimated by comparing C.T coordinates and E.C.L portal films taken with anterior-posterior and right-left direction. From the results of experiments, the average distance errors between the target isocenter and its mean position were 0.71$\pm$0.19 for lateral, 0.45$\pm$0.15 for inferior-superior, 0.63$\pm$0.18 for anterior-posterior. And the maximum distance error was less than 1.3 mm. The new head fixation frame and frame mounting system were non-invasive, accurately relocatable, easy to use, very light and well tolerable by the results of phantom tests. The major advantage of using this frame mounting system is complete access to any point in the Patients cranium especially posterior direction

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.109-124
• /
• 2020

In Korea, despite much interest in real estate, it is not easy to predict prices. Because apartments are both residential spaces and investment materials. Key figures affecting the price of apartments vary widely, and there are also regional characteristics. This study was conducted to derive the factors and characteristics that affect the sale price of apartments in S City, Gyeonggi-do. In general, people diagnose that better subway accessibility leads to higher apartment sales price. Nevertheless, in the case of S City, the price was slightly lower as it was closer to Line 1, but the higher the subway accessibility at Shinbundang Line, the higher the price. The five-year average of government bonds and the price were inversely related, and it was found to be proportional to the M2 balance and the price. The floor area ratio and the total number of parking lots had a great influence on the price, and the presence of department stores and discount marts within 1.5 km were the most important factors in the area of cultural aspect.