• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.1030-1035
• /
• 2021

Diving fishermen are demanding permission to use an inspirator that can efficiently catch Manila clam; however, coastal fishermenargue that the use of inspirator devastates the seabed and depletes fishery resources. Therefore, the aim of this study was to evaluate the fishing power of diving gears and its effect on coastal fishing grounds. The average time taken to fish in the seabed (4 m²) with a rake, water gun, and an inspirator was 11.17 min, 13.33 min and 7.81 min, respectivelyThe values of catch per unit time with a rake, water gun, and an inspirator were 3.35 kg/min, 2.26 kg/min, and 3.83 kg/min, respectively. Suspended sediments were observed the most in the water gun fishing area, and were observed more in April when fishing was not carried out than in February when fishing was carried out. However, the difference in the amount of sediment deposited in the fishing area using the three-fishing gears was very small. For an accurate analysis of the impact of the fishing gears on the seabed, supplementary tests such as grain size analysis and changes in benthic organisms need to be conducted.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.6
• /
• pp.335-345
• /
• 2022

PURPOSE. This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia grinding and polishing. MATERIALS AND METHODS. Zirconia crowns (n = 40) were first prepared and divided into two groups of materials: Labside (LS) and CS, after which each specimen went through a five-step grinding and polishing procedure. Following each surface treatment, surface characteristics were analyzed using confocal laser microscopy (CLSM), average surface roughness (Ra) values were processed from the profile data through Gaussian filtering, and X-ray diffraction pattern analysis was performed to evaluate the monoclinic (M) phase content. Then, a representative specimen was selected for field-emission scanning electron microscopy (FE-SEM), followed by a final analysis of the roughness and X-ray diffraction of the specimens using the independent t-test and repeated measures analysis of variance (RM-ANOVA). RESULTS. In every group, polishing significantly reduced the Ra values (P < .001). There was no significant difference in Ra between the polished state CS and LS. Furthermore, CLSM and FE-SEM investigations revealed that even though grain exposure was visible in CS specimens throughout the as-delivered and ground states, the exposure was reduced after polishing. Moreover, while no phase transformation was visible in the LS, phase transformation was visible in CS after every surface treatment, with the M phase content of the CS group showing a significant reduction after polishing (P < .001). CONCLUSION. Within the limits of this study, clinically acceptable level of surface finishing of (Y, Nb)-TZP can be achieved after conventional zirconia polishing sequence.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.489-495
• /
• 2022

This research investigated how adding Sb (0.75, 1.0, 2.0 and 5.0 wt%) to as-extruded aluminum alloys affected their microstructure, mechanical properties, electric and thermal conductivity. The addition of Sb resulted in the formation of AlSb intermetallic compounds. It was observed that intermetallic compounds in the alloys were distributed homogenously in the Al matrix. As the content of Sb increased, the area fraction of intermetallic compounds increased. It can be clearly seen that the intermetallic compounds were crushed into fine particles and homogenously arrayed during the extrusion process. As the Sb content increased, the average grain size decreased remarkably from 282.6 ㎛ (0.75 wt%) to 109.2 ㎛ (5.0 wt%) due to dynamic recrystallization by the dispersed intermetallic compounds in the aluminum matrix during the hot extrusion. As the Sb content increased from 0.75 to 2.0 wt%, the electrical conductivity decreased from 61.0 to 59.8 % of the International Annealed Copper Standard. Also, as the Sb content increased from 0.75 to 2.0 wt%, the ultimate tensile strength did not significantly change, from 67.3 to 67.8 MPa.

• Journal of Korea Foundry Society
• /
• v.42 no.3
• /
• pp.153-160
• /
• 2022

The effect of thickness on the microstructure and the mechanical properties of centrifugal cast 625 was investigated. Centrifugal cast 625 with various thickness of 10, 17 and 50mm showed partially columnar grained structure 8, 12.3 and 18.5mm respectively from the outer surface. Secondary dendrite arm spacing in the columnar grains slightly increased with increasing casting thickness. Tensile strength of the columnar region was similar regardless of casting thickness. Solidification behavior of the columnar grained region is similar to that of directional solidification, thus solidification rate in the centrifugal cast tube was extrapolated from the secondary dendrite arm spacing data of the directionally solidified material. The equiax grained region formed interior of the thick castings. The tensile strength of the equiaxed region showed the average value of the columnar region which is presumably originated from the grain structure rather than secondary dendrite arm spacing.

• Journal of Environmental Science International
• /
• v.30 no.11
• /
• pp.957-965
• /
• 2021

This research was carried out to investigate seed germination and growth of the perennial plant Apocynum lancifolium under different NaCl concentrations, with a view for future cultivation on reclaimed land. Initial characterization revealed that the average length and weight of A. lancifolium seed pods was 133.6 mm and 0.23 g, respectively, and the thousand-grain weight was 0.59 g. Upon examining the effects of light on seed germination, we found germination to be 1.7% higher under light conditions (90%) than under dark conditions (88.3%). In terms of the response to salt stress, we found that 90% of seeds germinated in the 0.00%, 0.25%, and 0.50% salt treatment groups. Although salt treatment up to a concentration of 0.5% was found to have little effect on seed germination, the rate of germination decreased at higher concentrations and was completely inhibited in the 2% treatment. We also established that germination rates were higher in seeds sown in horticultural topsoil than in the coarse sandy soil found in the plant's natural habitats. Although the growth of A. lancifolium tends to decrease with an increase in salt concentration, we found that the stem thickness, fresh weight, and dry weight of A. lancifolium seedlings subjected to 0.25%-1.0% salt were comparable to those of the control seedling that were not exposed to salt. Furthermore, in contrast to those plants subjected to 2.0% salt, these plants continued to grow and remained viable.

• Animal Bioscience
• /
• v.35 no.3
• /
• pp.410-421
• /
• 2022

Objective: Two series of experiments were conducted to determine how the incremental levels of sodium metabisulfite (SMB)-treated fruit and vegetable discards (FVD) in diet of Hanwoo heifers and cows affect their performance and health. Methods: In Exp. 1, 36 Hanwoo heifers were stratified by age (13.3±0.83 mo) and initial body weight (305±19.7 kg), and divided randomly to one of three diets containing 0%, 10%, or 20% SMB-treated FVD (as-fed basis). The experiment lasted 110 d, including 20 d of adaptation. In Exp. 2, 24 multiparous Hanwoo cows were divided into three groups based on age (48.2±2.81 mo) and initial body condition score (2.64±0.33). Cows in each block were assigned randomly to one of three diets containing 0%, 11%, or 22% SMB-treated FVD (as-fed basis). The experiment lasted 80 d, including a 20-d adaptation period. In both experiments, SMB-treated FVD was used as a replacement for wet brewers grain in total mixed ration (TMR). Results: Growing heifers exhibited no differences in their daily feed intake (6.58±0.61 kg/d dry matter [DM]), average daily gain (0.60±0.07 kg/d), and body condition score when they consumed the incremental levels of SMB-treated FVD. Although most blood metabolites were unaffected by treatments, blood urea-N and β-hydroxybutyrate levels decreased linearly as the SMB-treated FVD level increased in TMR. Similar to Exp. 1, minor differences were found in daily feed intake (8.27±0.72 kg DM/d) and body condition score of Hanwoo cows. Most blood metabolites remained unaffected by treatments, but blood urea-N decreased as the SMB-treated FVD level in TMR increased. Conclusion: Our findings suggest that SMB-treated FVD could be safely incorporated into the diet of Hanwoo heifers and cows, potentially improving N-use efficiency in the body while not impairing performance or health.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.711-715
• /
• 1995

This study was carried out to determine the desirable screeing condition for low-temperature germinability of rice seeds. The germination test was performed with fifty rice varieties from three countries, mainly including the recent Korean rice cultivars. The analyzed result of germination test under three temperature conditions(13$^{\circ}C$, 16$^{\circ}C$, $25^{\circ}C$) pointed out that 11 days after seeding at 13$^{\circ}C$ was the most efficient testing condition for low-temperature germinability in terms of mean and variation in germination rate. Highly significant correlations were observed between germination rates of 11 days after seeding at 13$^{\circ}C$ and germination coefficients, average days of germination at 13 for 20 days. Low-temperature germinability were highly positively associated with days to heading or amylose content, but negatively correlated with grain width.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.4
• /
• pp.15-30
• /
• 2021

This study analyzed the changes in land-cover and sedimentary environment before and after flooding through drone images and sediment analysis for the Seomjin River Chimsil Wetland. The results showed that the area of some land-covers such as sand bar, grass, and trees were continuously changed. The acidity level of the sediments in the Seomjin River Chimsil Wetland was weakened gradually by flooding and EC was also decreased. The levels of organic matter, effective phosphoric acid, and CEC, however, were fluctuating depending on branches, which seems to be the result of landization as new sedimentary environment was developed and vegetation was settled after the flood. Average mean size of river sediments was found to be fine sand, and it exhibited various particle size characteristics from granule to medium silt depending on the location. As the sedimentary environment changed due to the effects of floods and typhoons, the particles were granulated or grain refined depending on the position. In the Seomjin River Chimsil Wetland, there were factors that could interfere with geomorphic development and sedimentary environment, contamination sources in and around the wetland, and natural threat factors. Therefore, in this study, a conservation and management plan was proposed to remove these threat factors and to preserve the scarcity, naturalness, and dynamics of Seomjin River Chimsil Wetland.

• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.484-492
• /
• 2023

In this study, Ni-Y₂O₃ powder was prepared by alloying recomposition oxidation sintering (AROS), solution combustion synthesis (SCS), and conventional mechanical alloying (MA). The microstructure and mechanical properties of the alloys were investigated by spark plasma sintering (SPS). Among the Ni-Y₂O₃ powders synthesized by the three methods, the AROS powder had approximately 5 nm of Y₂O₃ crystals uniformly distributed within the Ni particles, whereas the SCS powder contained a mixture of Ni and Y₂O₃ nanoparticles, and the MA powder formed small Y₂O₃ crystals on the surface of large Ni particles by milling the mixture of Ni and Y₂O₃. The average grain size of Y₂O₃ in the sintered alloys was approximately 15 nm, with the AROS sinter having the smallest, followed by the SCS sinter at 18 nm, and the MA sinter at 22 nm. The yield strength (YS) of the SCS- and MA-sintered alloys were 1511 and 1688 MPa, respectively, which are lower than the YS value of 1697 MPa for the AROS-sintered alloys. The AROS alloy exhibited improved strength compared to the alloys fabricated by SCS and conventional MA methods, primarily because of the increased strengthening from the finer Y₂O₃ particles and Ni grains.

• Corrosion Science and Technology
• /
• v.22 no.5
• /
• pp.359-367
• /
• 2023

The localized corrosion resistance of the Ni-based Inconel 718 alloy after solution heat treatment was evaluated using electrochemical techniques in a solution of 25 wt% NaCl and 0.5 wt% acetic acid. Solution heat treatment at 1050 ℃ for 2.5 hours resulted in an increased average grain diameter. Both Ti carbides (10 ㎛ diameter) and Nb-Mo carbides (1 - 9 ㎛ diameter) were distributed throughout the material. Despite heat treatment, the shape and composition of these carbides remained consistent. An increase in solution temperature led to a decrease in pitting potential value. However, the pitting potential value of solution heat-treated Inconel 718 was consistently higher than that of as-received Inconel 718 at all tested temperatures. Localized corrosion initiation occurred at 0.4 V_SSE in a temperature environment of 80 ℃ for both as-received and solution heat-treated Inconel 718 alloys. X-ray photoelectron spectroscopic analysis indicated that the composition of the passive film formed on specimen surfaces remained largely unchanged after solution heat treatment, with O1s, Cr2p_3/2, Fe2p_3/2, and Ni2p_3/2 present. The difference in localized corrosion resistance between as-received and solution heat-treated Inconel 718 alloys was attributable to microstructural changes induced by the heat treatment process.