• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.12-40
• /
• 1983

Heading behaviour of native japonica (GI) and Japanese varieties (GII) grown during 1910-1920s were thermo-sensitive, home bred varieties during 1930s (GIII) - 1950s (GIV) were photo-sensitive and semi-dwarf indica derived varieties released since 1971 (GV) were controlled by basic vegetative phase. Number of leaves on main culm was increased with varietal improvement and culm length was gradually shortened as variety improved. GV variety had the shortest plant height among the groups. The first internode length was about 30cm in all groups and difference of 2nd-4th internode length was caused shortening the culm length. Panicle length and diameter of panicle neck were shortened and became thinner as variety developed from GI to GIV, however, GV had longer panicle and thick panicle neck, respectively. Number of panicles/hill and straw weight/hill increased and became heavier as variety improve from GI to GIV but GV had moderate number of panicle/hill and relatively light straw weight. Number of spikelet/panicle has been reduced with varietal improvement but GV had the biggest number. Grain yield/hill also increased as variety improved, however, it was decreased as transplanting season postponed and GV had shown the most sensitive difference. Top dry matter weight at heading stage and at 20 days after heading (20 DAH) had no difference among the groups except GI which was the smallest. Average grain weight at 20 DAH was heavier in the order of GI > GII, GV > GIV > GIII. It had a little variation in GI & GII while that of other variety group showed significant decrease as transplanting delayed. Harvest index (HI) of GV was the highest at 54% for the earlier transplanting and GIII had the lowest HI. Difference of HI became conspicuous for the later transplanting, the varieties bred later had the lower HI when transplanting of rice delayed. At the earliest transplanting applied (May 15), the grain yield was higher in the order of GI > GIV > GIII > GII > GI, however, that of Tongil type variety (GV) was the lowest for the latest transplanting (June 29). Interrelationship among the agronomical characteristics and grain yield was discussed.

• Nuclear Engineering and Technology
• /
• v.15 no.3
• /
• pp.197-206
• /
• 1983

The slightly hyperstoichiometric uranium dioxide, i.e. U $O_{2.005}$ and U $O_{2.01}$ within a range of the requirement for the use of a nuclear fuel, were sintered directly in an atmosphere of $CO_2$/CO mixture without any succeeding reduction process. The kinetics of sintering in the late stage were investigated for various O/U ratios. A sintering diagram, which show the relation of Temperature-Time-Density-Grain size, was established for each O/U ratio. Only by controlling the oxygen partial pressure in the sintering atmosphere, U $O_2$ pellet could be sintered very easily at low temperature 1050$^{\circ}$～120$0^{\circ}C$ with a density above 95% T.D. and average grain size above 7${\mu}{\textrm}{m}$. It was found that the rate of grain growth follows D=(Kt)$^{1}$4/ in the late stage of sintering. And the activation energies for grain growth in the final sintering stage were found to be 75, 64 and 62kca1/mo1 for U $O_{2.005}$, U $O_{2.01}$ and U $O_{2.10}$, respectively. Although no significant differences are obtained between the activation energies for different O/U ratios, the sinterability is enhanced considerably with increasing the oxygen partial pressure in the sintering atmosphere.tmosphere.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.403-408
• /
• 1987

The milled rice yield of the fertilized Zeolite in the sandy loam as 542 Kg/10a was increased by 11% compared with the check plat as a standard cultivation. Significant positive correlations of that were found between grain yield/plant and panicle/total weight ratio or average weight of panicle, while lower correlations between ratio of riqened grains and grain yield/ plant. But significant negative correlations were found between 1,000-grain weight of rough and 4th. 5th internode/culm length ratio. It was reavealed that there were higher direct effects for ratio of ripened grains and spikelets/panicle affecting grain yield/plant through path analysis among the yield components. Moreover, organic dry matter production at 35 days after heading were heavier by 26% in active leaves, 19% in stem + leaf sheath, and 5% in panicle, respectively. Ratio of settled spikelets on the terminal of primary rachis-branch was 47% to total spikelets, and 37% in half-upper of that, moreover many spikelets settled on the terminal of rachis. Therefore, it was recognized that there were a dominant effect of apical glumous flower by fertilized Zeolite.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.88-102
• /
• 2017

Long-term changes in bathymetry and grain size of surface sediments were investigated for understanding depositional sedimentary environments in the channelized Yeongsan River Estuary, Korea. The results revealed that an average depth of the estuary had decreased up to 2.1 m from 1982 to 2006, while it had increased to 0.3 m from 2006 to 2012. The rapid decrease of the water depth from 1982 to 2006 was due to the vast deposition of mud caused by the change of water course and flow velocity after the estuary was dammed. Meanwhile the increase of the water depth from 2006 to 2012 may be associated with multiple erosional processes, including a dredging at the southern part of the estuary and other erosions from the dike sluice expansion work. Considering the water-depth change and tidal-level variation in the study area, an depositional rate in the estuary is estimated to be 8~9 cm/yr for the last 2 decades (1982~2006). The sediments of Yeongsan River Estuary are largely composed of silt-clay mixtures: overall, silt is distributed mainly in the shallow area of the estuary edge, while clay is confined to the deep area of the estuary center. Mean grain size of the sediments is 6.0 Ø on average in 1997, 7.8 Ø on average in 2005 and 7.7 Ø on average in 2012, respectively, suggesting that the sediments became finer due to the increase of silt and clay contents in 1997~2005. Furthermore, several lines of evidences, including the comparison between the amounts of the sediment influx discharged from the Yeongsan River and the sediments in the estuary, and the changes in distribution pattern of silt and clay contents implying that they moved from offshore to estuary dike, indicate that the mud sediments are originated mainly from the offshore, not from the river.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.555-564
• /
• 2010

Aphid and mite are the major insects that harm corn. These insects are difficult to control because they are very sensitive to environmental conditions. The purpose of this experiment was to information the loss in quantity of corn and to select inbred lines with resistance after exposing corn to aphid and mite. When exposed to aphid, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 18.4, 10.9, 1.7, 5.4, 2.3, 1.5 and -0.2%, respectively. When exposed to mite, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 49.7, 16.5, 20.7, 18.9, 9.5, and -3.4, respectively. Mite had more significant impact on the loss than aphid. Among these factors, grain yield and ear dimater were most significantly correlated on the loss to aphid ($r=0.83^{**}$), while kernel length and thickness were most significantly correlated on the loss to mite ($r=0.83^{**}$). However, ear length was not related to loss to the two insects. The inbred lines that were often used for $F_1$ hybrid which was lower than the average loss by aphid, were KS7, B68, 61B3, 70A1, and KS5, while the inbred lines that were often used for $F_1$ hybrid which was lower than the average decrease by mite, were KS7, B68, 61B3, 66B2-4, 70A1, 72B2, and KS5. These inbred lines could be used to breed inbred lines, hybrid, and open pollination variety that confer resistant to aphid and mite.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.261-272
• /
• 2008

This study was conducted to provide the fundamental data based on the agronomic characteristics of domestic aroma rice, widely cultivated domestic rice and foreign aroma rice for breeding of functional aromatic rice. Among the 104 varieties, all of domestic aroma rice and widely cultivated rice varieties were headed, 24 of 84 varieties of foreign aroma rice were not headed. The average heading date of domestic aroma rice Japonica types of domestic rice was later as 136 day, and Tongil types of domestic aroma rice were faster as 122 day. The average culm length of Indica types of foreign aroma rice was longer as 130 cm, and Tongil types of were shorter as 74 cm. The average panicle length of domestic aroma rice and traditional rice were about 21 cm, and Indica types of foreign aroma rice were longer as 29.5 cm. The average 1,000 grain weight of Tongil types of domestic aroma rice and was not a difference with the domestic aroma rice and was more 2.5 g than the Indica types of foreign aroma rice. The average ratio of grain width and length of Indica types of foreign aroma rice were highest as 3.29 (W/L), and the domestic traditional rice was lowest as 1.7 (W/L). The average fertility rate of the domestic aroma rice, the widely cultivated domestic rice, and the Japonica types of foreign aroma rice were above 89.7%, but the Indica types of foreign and the Tongil types of domestic aroma rice were below 65.4%. The average germination rate of foreign aroma rice were above 83.7%, and domestic aroma rice were above 90.4%. The non-glutinous rice were 64 varieties (84.2%) of total 104 accessions of material rice and the waxy rice were 7 varieties (1%). In the domestic aroma rice, Hyangmi2ho and Aranghyangchalbyeo has a mild aroma grade. In the foreign aroma rice, 22 of 40 varieties of Indica types and 9 of 16 varieties of Japonica types has a lightly aroma grade. And 13 varieties of widely cultivated domestic rice has a non-aroma grade.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.93-103
• /
• 1992

Experiments were conducted in the research field of the Wheat and Barley Research Institute with three barley cultivars, Olbori, Kangbori and Suwon 18, which showed different growth characteristics. The highest rates of daily dry matter accumulation in grains were 1.03 1.94 mg / grain / day in early and optimum sowings and 0.88 1.88 mg / grain / day in late sowings, which occurred around 20～30 days after heading in early and optimum sowings and 15～20 days after heading in late sowings. Grains reached their maximum weight by 40 days after heading in early and optimum sowings and 35 days after heading in late sowings. Total sugar content in grains followed a pattern of linear increase immediately after heading, but it started to decrease around 20 days after heading. On the other hand, starch content continued to increase until maturity. The contents of both components were high in the order of ＆apos;Olbori＆apos; ＆gt; ＆apos;Kangbori＆apos; ＆gt; ＆apos;Suwon 18＆apos;, but they did not respond in a regular pattern to different sowings. 1,000 grain weight showed highly significant positive correlation(r=0.767$^{**}$) with the duration of grain growth, but it had negative correlations with the average (r=-0.548$^{**}$) or the sum (r=-0.595$^{**}$) of post-anthesis daily mean temperature.ature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.296-305
• /
• 2002

Rice yield and grain guality were investigated with treatments of silicate fertilizer, straw compost and NPK fertilizer in the paddy soil of silty clay loam from 1975 to 2001. Rice yield of the treatments of silicate fertilizer. $1,500kg\;ha^{-1}$ and straw compost $10,00kg\;ha^{-1}$ were increased by 15%, 10%, respectively, for 27years average yield in comparison with NPK plot. In the plots of NPK+silicate fertilizer $1,500kg\;ha^{-1}$, NPK+silicate fertilizer $2,500kg\;ha^{-1}$, taste value(Toyo instrument) of cooked rice and quality assessment were higher than those in NPK control plot and NPK+straw compost $10,000kg\;ha^{-1}$ plot, but the contents of crude protein, amylose of milled rice grain were lower than those in other treated plots. Nitrogen and phosphorous contents of rice plant were lower, but $SiO_2$ content were higher in the treatment of silicate ferti lizer 1,500, $2,500kg\;ha^{-1}$ than straw compost $10,000kg\;ha^{-1}$ plot. Rice quality assessment was positively correlated with taste value, but it was negatively correlated with crude protein and amylose content of milled rice grain. Ratios of Mg/N, $Mg/N{\cdot}K_2O$, $SiO_2/N$, $SiO_2/P_2O_5$ and $SiO_2/K_2O$ were positively correlated with taste value and quality assessment of rice grain, but negatively correlated with crude protein, amylose and fatty acid content. In soil chemical characteristics related with rice quality after experiment in 2001, soil pH and $SiO_2$ content were positively correlated with taste value and quality assessment of rice grain, but contents of soil $P_2O_5$, ex-K were negatively correlated with them.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.172-179
• /
• 2006

When $Al_2O_3-MoO_3$ mixture is reduced, $MoO_3$ is only reduced to Mo at $900^{\circ}C$. But a compound between $Al_2O_3$ and Mo is not formed up to $1300^{\circ}C$. In the case of $Al_2O_3-MoO_3-MnO_2$ mixture, an intermediate compound $Mn_2Mo_3O_8$ is firstly formed at $900^{\circ}C$ and changes to $MnAl_2O_4$ at $1100^{\circ}C{\sim}1300^{\circ}C$. $Al_2O_3/Mo/MnO_2$ composite are manufactured by a selective reduction process in which Mo is only reduced in the powder mixture of $Al_2O_3,\;MoO_3\;and\;MnO_2$ oxide. For $Al_2O_3/Mo$ composite, the average grain size was not changed with increasing Mo content because of inhibition of grain growth of $Al_2O_3$ matrix in the presence of Mo particles. Fracture strength increased with increasing Mo content due to phenomenon of grain growth inhibition of $Al_2O_3$ matrix. Hardness decreased because of a lower hardness value of Mo, whereas fracture toughness increased. For $Al_2O_3,\;Mo\;and\;MnO_2$ composite, grain growth was facilitated by MnOB and it showed a lower fracture strength because of grain growth effect with increasing Mo and $MnO_2$ content. Hardness decreased because of the grain growth of matrix and coalesced Mo particles to be located in grain boundary, whereas fracture toughness increased.