• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.419-422
• /
• 2001

The electrical properties of Pr$_{6}$O$_{11}$-based ZnO varistors composed of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Dy$_2$O$_3$- based ceramics were investigated with CoO content in the range of 0.5~5.0 mol%. As CoO content is increased, the average grain size and the density were increased in the range of 9.86~27.22 $\mu$m and in the range of 5.25-5.55 g/cm$^3$, respectively. The varistor voltage was decreased in the range of 235.32~86.01 V/mm due to the increase of average grain size with CoO content. The varistors doped with CoO in the rage of 1.0~2.0 mol% exhibited a high nonlinearity, in which is above 55 in the nonlinear exponent and below 1.5 $\mu$A in the leakage current. Increasing CoO content further greatly decreased the nonlinearity.ity.ity.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.115-120
• /
• 1998

This Study was performed to investigate the contents of aflatoxin $B_{1}$ in cereal, pulse, nuts and these products of domestic and import. These results were as follows. 1. Average concentration(in ${\mu}g/kg$) of aflatoxin $B_{1}$ in domestic foods were 2.6 in cereal, 3.9 in pulse, 4.2 in nuts and 1.4 grain products. The contents of aflatoxin B$_{1}$ in pulse and nuts were much higher than those of cereal and grain products. But their values were still within $10{\mu}g/kg$ the maximum residual level of aflatoxin $B_{1}$ for food of Korea. 2. Average contents of aflatoxin $B_{1}$ in import foods were 4.8, 5.4, 6.0, $3.8{\mu}g/kg$ for cereal pulse , nuts and popcorn & peanuts butter, respectively. And these values were found to be below the maximum residual level ($10{\mu}g/kg$) of aflatoxin $B_{1}$ for food of Korea. 3. The concentration of aflatoxin $B_{1}$ in 2 samples of domestic and 9 samples of import foods were over the tolerance limit for aflatoxin $B_{1}$ in food of Korea. Therefore, the hygienic managements of the foods should be required during storage and circulation at market.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2E
• /
• pp.49-55
• /
• 2006

Compressional wave velocity (Vp), shear wave velocity (Vs), elastic and physical properties, and electrical resistivity for two core sediments obtained from Southeastern Yellow Sea Mud (SEYSM) were measured and computed. The sediments consist of homogeneous mud (mostly silt and clay) with shells and shell fragments. As a result, the mean grain size is uniform ($7.5-8.5{\Phi}$ throughout the core sediments. However, physical properties such as wet bulk density and porosity show slightly increasing and decreasing patterns with depth, compared to the mean grain size. The compressional (about 1475 m/s in average) and shear wave (about 60 m/s in average) velocities with depth accurately reflect the pattern of wet bulk density and porosity. Electrical resistivity is more closely correlated with compressional wave velocity than physical properties. The computed Vp/Vs and Poisson's ratios are relatively higher (more than 10) and lower (approximately 0.002) than Hamilton's (1979) data, respectively, suggesting the typical characteristics of soft and fully water-saturated marine sediments. Thus, the Vp/Vs ratio in soft and unconsolidated sediments is not likely sufficient to examine lithology and sediment properties. Relationships between the elastic constant and physical properties are correlated well. The elastic constants (Poisson's ratio, bulk modulus, shear modulus) given in this paper can be used to characterize soft marine sediments saturated with seawater.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.267-271
• /
• 1995

The electrical properties of (S $r_{0.50}$P $b_{0.25}$B $a_{0.25}$)Ti $O_{3}$ ceramics were studied. Specimens were prepared by the conventional mixed oxide method, and fired between 1300[.deg. C] - 1375[.deg. C], for 2[hr.]. The electrical and structural preperties of specimens were investigated with sintering temperature. Increasing the sintering temperature from 1300[.deg. C] to 1375[.deg. C], average grain size was increased from 2.61[.mu.m] to 4.53[.mu.m]. (S $r_{0.50}$P $b_{0.25}$B $a_{0.25}$)Ti $O_{3}$ specimen sintered at 1350[.deg. C] for two hours showed good dielectric constant(2147) and dielectric loss(1.7[%]) properties at 1[khz]. Sintered density and breakdown field strength were the highest value of 5.75[g/c $m^{3}$], 20[kV/cm], respectively. Dielectric properties with applied voltage were independent of the sintering temperature.temperature.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.75-75
• /
• 2017

Rye is cultivated on about 30,000ha domestically for forage and green-manure production in Korea. 'Daegokgreen' has been developed as a good quality rye cultivar for forage and green-manure, which was doubled-chromosome by colchicine treatment of diploid rye cultivar 'Gogu' in 2010. By the colchicine treatment with 0.05% for 12 hours at $2^{nd}$ leaf stage of 'Gogu', 31 tetraploid plants were obtained and they produced 2,470 seeds with 135 spikes. There was 4.4 in the number of spikes per plant, 18.3 in grain number per spike, and 37.6 g in the1,000-grain weight. The heading date of 'Daegokgreen' was April 11, which was two days later on average compared with 'Gogu'. The biomass (fresh weight) of 'Daegokgreen' was 3,701kg, which was similar to 'Gogu'. The average crude protein content of 'Daegokgreen' was 8.9%, which was 1.0% point higher than 'Gogu'. 'Daegokgreen' was found to be strong resistant to winter-kill and can be adapted to before maize cultivation.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.63-73
• /
• 2018

Rice is a staple food source in Asian countries. In paddy field, rice plant can take up toxic elements through its roots from contaminated soils, and its leaves and grain can absorb the toxic elements deposited on the soil surface. A totla of 40 soil and polished rice samples were collected around four abandoned metal mines in Korea and analyzed for As, Cd, Cu, Pb and Zn by atomic absorption spectrophotometer (AAS). The average contents of As, Cd, Cu, Pb and Zn in rice grain grown on the contaminated soils were 0.247, 0.174, 4.694, 0.804 and 16.78 mg/kg, respectively. These levels are higher than worldwide average concentrations. Assuming the rice consumption of 169 g/day by overall households in Korea, the estimated daily intakes from the rices were found to be 33, 48, and 63% for As, Cd, and Pb, respectively, of the acceptable daily intake (ADI) suggested by the FAO/WHO Joint Food Additive and Contaminants Committee.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.264-270
• /
• 2019

As a case study on aspect ratio behavior, Kaolin, zeolite, $TiO_2$, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 pai media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ${\sim}6{\mu}m$ are shifted to submicron size, D50 ${\sim}0.6{\mu}m$, after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.311-318
• /
• 1998

The reaction bonded alumina ceramics with reinforced particles which have low shrinkage were pro-duced by blending of SiC or TiC or ZrO2 powders to the mixture of Al metal and Al2O3 powder. The powd-ers were attrition milled isostantically pressed and preheated tio 110$0^{\circ}C$ with a heating rate of $1.5^{\circ}C$/min The specimens were then sintered at the temperature range 1500 to 1$600^{\circ}C$ for 5 hours with a heating rate of 5$^{\circ}C$/min. The specimens showed 5-9% weight gain and 2-9% dimensional expansion through the complete oxidation of Al after preheating up to 11--$^{\circ}C$ the overall dimensional change of the specimens after the reaction sintering at 1500-1$600^{\circ}C$ was 6-12% The maximum densities were 92% theoretical. The fine grain-ed(average grain size :0.4 ${\mu}{\textrm}{m}$) microstructure were observed in the specimen with ZrO2 and SiC. But the microstructure of specimen with TiC was relatively coarse.(average grain size : 2.1 ${\mu}{\textrm}{m}$) The mullite phase was formed by the reaction of Al2O3 and SiO2 in a specimen with SiC. In the TiC contained specimen TiC was oxidized into TiO2 and finally reacted with Al2O3 to form Al2TiO5 during sintering.