• Ocean and Polar Research
• /
• 제42권3호
• /
• pp.249-261
• /
• 2020

This study details grain-size distributions (GSDs) of carbonate and biogenic opal fractions of the sediments retrieved from the South Korea Plateau in the East Sea and draws paleocanographic implications from them. The opal-fraction GSDs show fine modes of 10.3 ㎛ and coarse modes of 102.5 ㎛ on average. The fine-mode grains of opal fractions mainly consist of small diatoms and radiolarians including their broken frustules, while the coarse-mode grains are mostly comprised of large warm-water diatoms and radiolarians. Significant positive correlation between opal contents and abundances of the coarse-mode GSDs in the total GSDs suggests that the abundances of the coarse-mode GSDs were controlled by the increased surface productivity of warm-water diatoms during interglacial stages. The carbonate-fraction GSDs show fine modes of 2.4 ㎛ and coarse modes of 99.1 ㎛ on average. The fine-mode grains mainly consist of coccolithophores, while the coarse-mode grains are mostly comprised of intact or broken planktonic foraminifera. The abundances of coarse-mode and fine-mode GSDs were not correlated with carbonate contents, suggesting a complex control exerted by both the degree of carbonate dissolution and the productivity of coccolithophores on the carbonate-fraction GSDs.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.957-966
• /
• 1996

An attempt was made to measure the availability of waste heat, released from the cooling system of a small engine, which can be utilized for grain drying. An engine powered flat-bed rough rice dryer was constructed and the performance of the dryer with available engine-waste heat was analyzed for 10 , 20, 30 and 40 cm rough rice bulk depths with a constant dryer base area of 0.81$m^2$/min. The waste heat was sufficient to increase the drying air temperature 7 to 12$^{\circ}C$ at an air flow rate of 8.8 to 5.7㎥/min, while the average ambient temperature and relative humidity were 24$^{\circ}C$ and 70%. The minimum energy requirement was 3.26 MJ/kg of water removed in drying a 40 cm deep grain bed in 14h. A forty to fifty centimeter deep grained seems to be optimum in order to avoid over-drying in the top layers. On the basis of minimum energy requirement (3.26 MJ/kg ) , an estimation was made that the waste heat harvest from an engine of a power range of 1 to 10.5PS can dry about 0.1 to 1 metric on of rough rice from 23% to 15% m.c. (w.b) in 12 h at an average ambient temperature and relative humidity of $25^{\circ}C$ and 80%, respectively. The engine-waste heated grain dryer can be used in the rural areas of non industrialized countries where electricity is not available.

• 한국자기학회지
• /
• 제23권1호
• /
• pp.12-17
• /
• 2013

금속 분말 니켈(Ni)을 HCl용액에 용해시킨 후 $H_3BO_3$, KOH을 첨가하여 Chloride 도금용액을 제조 후 Ni plate 기판에 도금하였다. 도금두께는 $3{\mu}m$로 일정하게 유지하였다. 전류밀도를 $1{\sim}30mA/cm^2$ 변화를 준 결과 전류밀도를 증가시킬수록 Ni 후막표면이 거칠어졌다. $25mA/cm^2$와 $30mA/cm^2$에서는 균열된 표면형상을 관찰하였다. 또한 XRD patterns 변화를 관찰한 결과 전류밀도가 증가할수록 FCC(111)과 FCC(220) 및 FCC(311)상의 강도는 증가한 반면 FCC(200)상의 강도는 감소하는 것을 관찰하였다. 전기도금된 Ni의 수평 및 수직 자화 값을 측정하였는데 기판에 의한 수평자화 값이 크게 나왔고, 코팅층 두께가 증가할수록 수직자화 값이 커지는 것을 확인하였다.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.17-24
• /
• 2009

The Friction Stir Welding(FSW) has mainly been used for making butt joints in Al alloys. Development of Friction Stir Lap Welding(FSLW) would expand the number of applications. Microstructure of FSLW in A5052-H112 alloy was investigated under varying rotation and welding speed. As the rotation speed was increased and the welding speed was decreased, a amount of heat was increased. As a result, bead interval was narrower, bead width are larger, and experimental bead interval was almost similar to theoretical bead interval. Typical microstructures of FSLW A5052-H112 alloy consist of three zones, including Stir Zone(SZ), Thermo-Mechanically Affected Zone(TMAZ) and Heat Affected Zone(HAZ). As a amount of heat was increased, average grain size was larger in three zones. Nevertheless, the aspect ratio was almost fixed for FSLW conditions. The misorientation of SZ, HAZ and TMAZ was examined. A large number of low angle grain boundaries, which were formed by severe plastic deformation, were showed in TMAZ as comparison with SZ and HAZ. Microhardness distribution was high in order of BM, SZ, TMAZ, and HAZ. The Micro-hardness distribution in HAZ, TMAZ of upper plate were lager than lower plate. Relationship between average grain size and microhardness was almost corresponded to Hall-Petch equation.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.339-339
• /
• 2017

The long grain rice varieties adaptable to South-east Asia tropical regions were tried to develop in Cambodian Agriculture Research and Development Institute (CARDI), Cambodia. The final goal is to develop rice varieties which can culture in diverse environmental conditions of tropical regions of South-east Asia under climate change. We collected and evaluated for agronomic traits of 131 rice germplasm from Cambodia, China, India, Indonesia, Myanmar, Philippines and Vietnam in CARDI. We selected core germplasm including leading varieties of target countries and made 813 F1 cross combinations between leading varieties of each country and promising germplasm of high yield potential, resistance to biotic/abiotic stresses, aromatic rice, and so on. Out of 607 F1s evaluated to heading date, plant type, agronomic traits, and grain type, 106 F1s selected and advanced to F2 populations. 106 F2 populations were evaluated to major agronomic traits, grain type and yield-component traits, and selected 2,560 plants in 62 F2 populations. During six seasons in 2014~2016, the lines of F3 subsequent-generation were cultured a total of 6,256 lines. In yield trial for promising lines in F5 generation, the growth duration from sowing to harvesting was 97~114 days. These lines were 88~129 in number of grain per panicle, an average of 84.6% in the range of 79.3~91.9% in the percentage of ripened grain and 17.5~22.8g in 1000-brown rice weight. The rough rice yields were in the range of 4.33~6.06 ton/ha with an average of 5.23 ton/ha. The yield was increased to 5~47% than Chulsa and 12~41% than IR66. Five lines, KR54-28-1, KR55-14-2, KR57-5-2, KR67-57-2 and KR128-19-1 were 5.33~6.06 ton/ha in rough rice yield. These high yield potential lines would be evaluated to adaptability in Cambodia, Laos, Myanmar and Vietnam during 2017.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.155-155
• /
• 2017

The long grain rice varieties adaptable to South-east Asia tropical regions were tried to develop in Cambodian Agriculture Research and Development Institute (CARDI), Cambodia. The final goal is to develop rice varieties which can culture in diverse environmental conditions of tropical regions of South-east Asia under climate change. We collected and evaluated for agronomic traits of 131 rice germplasm from Cambodia, China, India, Indonesia, Myanmar, Philippines and Vietnam in CARDI. We selected core germplasm including leading varieties of target countries and made 813 F1 cross combinations between leading varieties of each country and promising germplasm of high yield potential, resistance to biotic/abiotic stresses, aromatic rice, and so on. Out of 607 F1s evaluated to heading date, plant type, agronomic traits, and grain type, 106 F1s selected and advanced to F2 populations. 106 F2 populations were evaluated to major agronomic traits, grain type and yield-component traits, and selected 2,560 plants in 62 F2 populations. During six seasons in 2014~2016, the lines of F3 subsequent-generation were cultured a total of 6,256 lines. In yield trial for promising lines in F5 generation, the growth duration from sowing to harvesting was 97~114 days. These lines were 88~129 in number of grain per panicle, an average of 84.6% in the range of 79.3~91.9% in the percentage of ripened grain and 17.5~22.8g in 1000-brown rice weight. The rough rice yields were in the range of 4.33~6.06 ton/ha with an average of 5.23 ton/ha. The yield was increased to 5~47% than Chulsa and 12~41% than IR66. Five lines, KR54-28-1, KR55-14-2, KR57-5-2, KR67-57-2 and KR128-19-1 were 5.33~6.06 ton/ha in rough rice yield. These high yield potential lines would be evaluated to adaptability in Cambodia, Laos, Myanmar and Vietnam during 2017.

• 농업생명과학연구
• /
• 제51권2호
• /
• pp.165-173
• /
• 2017

본 연구는 시험용 수집형 자주식 두류 수확기를 설계 제작하여 예취 건조된 나물 콩을 대상으로 수확작업 성능을 파악하였다. 수확시험은 수확기의 엔진 회전속도 2000, 2400, 2800rpm, 작업속도 0.6, 1.0, 1.4m/s의 설정에 따라 수집 손실비율, 배진 손실비율 등 수확손실과 수확된 곡물 품질로서 완전립 비율, 손상립 비율, 미탈곡립 비율, 이물질 비율을 분석하였으며, 그 외 수확된 나물 콩의 발아세와 발아율, 작물 재배 폭과 작업속도를 고려한 작업능률을 조사 분석하였다. 시험기는 운전조건이 엔진 회전속도 2800rpm, 작업속도 1.0m/s일 때 가장 좋은 작업 성능을 보인 것으로 판단되며, 이 때 수집 손실비율 약 2.7%, 배진 손실비율 약 0.5%, 총 손실비율 약 3.1%, 완전립 비율 약 99.3%, 손상립 비율 약 0.2%, 미탈곡립 비율 약 0.0%, 이물질 비율 약 0.2%의 작업 성능과 수확된 나물 콩의 발아세, 발아율은 약 100%, 71.7%를 보여 국외 보통형 콤바인 보다 곡물 손실이 적고, 수확 곡물의 품질도 높아 우수한 작업 성능을 보인 것으로 나타났다. 또한 시험기는 나물 콩의 수확시험 조건이 불량한 상태에서도 재배 폭이 약 2m인 3조 예취 건조 나물 콩을 약 1.0m/s의 작업속도로 수집 탈곡할 수 있어서 유효포장작업능률은 약 50a/h 정도일 것으로 판단되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.18-21
• /
• 2000

A nonconstact technique for reducing the core loss of a grain oriented silicon steel has been developed by the use of mechanical scribing Q-switched laser plasma jet or electron beam irradiation. Among these methods electron beam irradiation has advantages of domain refining without any deformation or damage of insulating film on the surface of a grain criented Si-Fe. Over the past years this processing was performed in vaccum of 10-4 Torr or below causing the problem of high cost and difficulty of continuous works. In this paper a miniature electron permeable window through which electron beam energy 4-80keV and average current 0.1-2mA. were obtained for electron beam irradiating on air was designed and manufactured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.697-700
• /
• 2001

In this paper, the structural and electrical properties of the Sr$_{1-x}$ Ca$_{x}$TiO$_3$ (0$\leq$x$\leq$0.2) (0$\leq$r$\leq$0.2)-based grain boundary layer ceramics were investigated by X-ray, SEM and V-I system. Increasing the Ca content, the average grain size and the lattice constant were decreased. The relative density of all specimens was >96%. The 2nd phase formed by thermal diffusing from the surface lead to a very excellent electrical properties, that is, $\varepsilon$$_{r}$>50000, tan$\delta$<0.05, $\Delta$C< $\pm$ 10%.\pm$ 10%.%.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.