• 한국농공학회지
• /
• 제18권1호
• /
• pp.4071-4078
• /
• 1976

The authors analyzed the seepage by means of the following mathmatical solutions of the Laplace Equations on the given boundary conditions. The boundaries of the flow region are of two types i) impervious boundaries (${\Phi}$=constant), and ii) reservoir boundaries (${\Phi}$=constant). The corresponding w plane, bounding the flow region, is the rectangle in Fig. 8-a. As the z plane and w plane are both polygons, by means of the Schwarz-Christoffel transformation the flow region in each of these planes can be mapped con for mally onto the same half of an auxiliary t plane, there by yielding, say, the functions z=f1(t) and w=f2(t). Then, either by eliminating the variable t or by using t as a parameter, the function w=f(z) can be established.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.461-467
• /
• 2010

This paper proposes a new soft-switched Sepic converter. It has low switching losses and low conduction losses due to its auxiliary communicated circuit and synchronous rectifier operation, respectively. Because of its positive and buck/boost-like DC voltage transfer function (M=D/(1-D)), the proposed converter is desirable for use in distributed power systems. The proposed converter has versions both with and without a transformer. The paper also suggests some design guidelines in terms of the power circuit and the control loop for the proposed converter.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.199-202
• /
• 2001

This article deals with stochastic reliability systems that include a repair facility and unreliable machines: the main facility of working and an auxiliary facility of "super-reserve" machines. The number of super-reserve machines are random number with a arbitrarily distribution and working machines break down exponentially. Defective machines line up for repair, whose durations are arbitrarily distributed. Refurbished machines return to the main facility. If the main facility is restored to its original quantity, the repair facility leaves on routine maintenance until all of super-reserve machines are exhausted. Then, the busy period is regenerated. The whole system also falls into the category of closed queues, with more options than those of basic models. The techniques include two-variate Markov and semi-regenerative processes, and a duality principle, to find the probability distribution of the number of intact machines. Explicit formulas obtained demonstrate a relatively effortless use of functionals of the main stochastic characteristics (such as expenses due to repair, maintenance, waiting, and rewards for higher reliability) and optimization of their objective function. Applications include computer networking, human resources, and manufacturing processes.

• 대한수학회보
• /
• 제34권2호
• /
• pp.273-285
• /
• 1997

The aim of this paper is to present theorems on the exitence of zeros for mappings defined on convex subsets of topological vector spaces with values in a vector space. In addition to natural assumptions of continuity, convexity, and compactness, the mappings are subject to some geometric conditions. In the first theorem, the mapping satisfies a "Darboux-type" property expressed in terms of an auxiliary numerical function. Typically, this functions is, in this case, related to an order structure on the target space. We derive an existence theorem for "obtuse" quasiconvex mappings with values in an ordered vector space. In the second theorem, we prove the existence of a "common zero" for an arbitrary (not necessarily countable) family of mappings satisfying a general "inwardness" condition againg expressed in terms of numerical functions (these numerical functions could be duality pairings (more generally, bilinear forms)). Our inwardness condition encompasses classical inwardness conditions of Leray-Schauder, Altman, or Bergman-Halpern types.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.952-955
• /
• 1996

It is difficult to determine the feeding rate of coagulant in water treatment process, due to nonlinearity, multivariables and slow response characteristics etc. To deal with this difficulty, the fusion of genetic algorithms and fuzzy inference system was used in determining of feeding rate of coagulant. The genetic algorithms are excellently robust in complex operation problems, since it uses randomized operators and searches for the best chromosome without auxiliary information from a population consists of codings of parameter set. To apply this algorithms, we made the look up table and membership function from the actual operation data of water treatment process. We determined optimum dosages of coagulant (PAC, LAS etc.) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.305-307
• /
• 1992

This paper presents a technique, which identifies both process noise covariance and sensor noise covariance by using innovation correlation test. A correlation test, which checks whether the square root Kalman filter is workingly optimal or not, is given. The system is stochastic autoregressive moving-average model with auxiliary white noise Input. The linear quadratic Gaussian control is used for minimizing stochastic cost function. This paper indentifies Q, R, and estimates parametric matrics $A(q^{-1}),B(q^{-1}),C(q^{-1})$ by means of extended recursive least squares and model reference control. And The proposed technique has been validated in simulation results on the fourth order system.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2705-2712
• /
• 2000

In meshless methods some techniques to impose essential boundary conditions have been developed since the approximations do not satisfy Kronecker delta properties at nodal points. In this study, new scheme for imposing essential boundary conditions is developed. Weight functions are modified by multiplying with auxiliary weight functions and the resulting shape functions satisfy Kronecker delta property on the bound ary nodes. In addition, the resulting shape functions possess and interpolation features on the boundary segments where essential boundary conditions are prescribed. Therefore the essential boundary conditions can be exactly satisfied with the new method. More importantly, the impositions of essential boundary conditions using the present method is relatively easy as in finite element method. Numerical examples show that the method also retains high convergence rate comparable to Lagrange multiplier method.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.876-882
• /
• 1999

It is difficult to determine the feeding rate of coagulant in the water treatment process, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the genetic-fuzzy system was used in determining the feeding rate of the coagulant. The genetic algorithms are excellently robust in complex optimization problems. Since it uses randomized operators and searches for the best chromosome without auxiliary informations from a population consists of codings of parameter set. To apply this algorithms, we made the lookup table and membership function from the actual operation data of the water treatment process. We determined optimum dosages of coagulant(LAS) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.312-319
• /
• 2004

The optimum dosage control is presumably the goal of every water treatment plant. However it is difficult to determine the dosage rate of coagulant, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the real number genetic-fuzzy system was used in determining the dosage rate of the coagulant. The genetic algorithms are excellently robust in complex optimization problems. Since it uses randomized operators and searches for the best chromosome without auxiliary informations from a population which consists of codings of parameter set. To apply this algorithms, we made the real number rule table and membership function from the actual operation data of the water treatment plant. We determined optimum dosages of coagulant(LAS) using the fuzzy operation and compared them with the dosage rate of the actual operation data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.169-171
• /
• 1995

Automatic control equipment in hydro power plant, such as turbine governor or automatic voltage regulator have to act promptly against for variation of power system, so it is necessary to check and test continuously. During last five years, the performance test of automatic control equipment was performed about 20 units of hydro turbine generator. In this process, because it has complex connection and before calibration, signal conditioner was developed as an auxiliary equipment for performance test. It includes function of signal amplifier, transducer, and meters. As a result of use this equipment for electric governor test at soyang-gang hydro power plant, it was possible to find output data equal to old one.