• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.198-203
• /
• 2004

This paper describes a real-time control architecture for DUSAUV (Dual Use Semi-Autonomous Underwater Vehicle), which has been developed at Korea Research Institute of Ships & Ocean Engineering (KRISO), KORDI, for being a test-bed oj development of technologies for underwater navigation and manipulator operation. DUSAUV has three built-in computers, seven thrusters for 6 degree of freedom motion control, one 4-function electric manipulator, one pan/tilt unit for camera, one ballasting motor, built-in power source, and various sensors such as IMU, DVL, sonar, and so on. A supervisor control system for GUI and manipulator operation is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers of vehicle for real-time control purpose, while MicroSoft OS product is ported on the supervisor system for GUI programming convenience. A hierarchical control architecture which consist of three layers (application layer, real-time layer, and physical layer) has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in a basin of KRISO is also provided.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2021

This study is a study on improving the pedestrian Care system, which delivers jaywalking events in real time to the autonomous driving control center and Autonomous driving vehicles in operation and issues warnings and announcements to pedestrians based on pedestrian signals. In order to secure reliability of object detection method of pedestrian Care system, the inspection method combined with camera sensor with Lidar sensor and the improved system algorithm were presented. In addition, for the occurrence events of Lidar sensors and intelligent CCTV received during the operation of autonomous driving vehicles, the system algorithm for the elimination of overlapping events and the improvement of accuracy of the same time, place, and object was presented.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.182-189
• /
• 2023

Depth estimation is a key technology in 3D map generation for autonomous driving of vehicles, robots, and drones. The existing sensor-based method has high accuracy but is expensive and has low resolution, while the camera-based method is more affordable with higher resolution. In this study, we propose self-attention-based unsupervised monocular depth estimation for UAV camera system. Self-Attention operation is applied to the network to improve the global feature extraction performance. In addition, we reduce the weight size of the self-attention operation for a low computational amount. The estimated depth and camera pose are transformed into point cloud. The point cloud is mapped into 3D map using the occupancy grid of Octree structure. The proposed network is evaluated using synthesized images and depth sequences from the Mid-Air dataset. Our network demonstrates a 7.69% reduction in error compared to prior studies.

• Electronics and Telecommunications Trends
• /
• v.35 no.1
• /
• pp.60-70
• /
• 2020

Artificial intelligence (AI) is expected to bring about a wide range of changes in the industry, based on the assessment that it is the most innovative technology in the last three decades. The manufacturing field is an area in which various artificial intelligence technologies are being applied, and through accumulated data analysis, an optimal operation method can be presented to improve the productivity of manufacturing processes. In addition, AI technologies are being used throughout all areas of manufacturing, including product design, engineering, improvement of working environments, detection of anomalies in facilities, and quality control. This makes it possible to easily design and engineer products with a fast pace and provides an efficient working and training environment for workers. Also, abnormal situations related to quality deterioration can be identified, and autonomous operation of facilities without human intervention is made possible. In this paper, AI technologies used in smart factories, such as the trends in generative product design, smart workbench and real-sense interaction guide technology for work and training, anomaly detection technology for quality control, and intelligent manufacturing facility technology for autonomous production, are analyzed.

• Journal of Biosystems Engineering
• /
• v.21 no.4
• /
• pp.422-428
• /
• 1996

This study was conducted to developed to develop a simple battery-powered autonomous vehicle for greenhouse works. A steering method using speed difference of two independent driving motors was adopted. DC motor driving circuit, speed control circuit and controller using one-chip microcomputer were constructed. The inputs of controller are rolling of the vehicle and current speed of driving motors. Using these signals, automatic guidance system along furrow was developed. A computer simulation program by the kenematic analysis was developed to find out optimal control algorithm. The results of this study are as follows. 1. Automatic guidance system along the furrow that adopted two independent driving motors and rolling of vehicle was developed. 2. The results of simulation showed that PID control was adequate to automatic guidance system along furrow. 3. Two commercial 12V battery serially connected were able to drive the vehicle on the soil ground for five hours in continuous operation and for four hours in intermittent operation without recharging the battery. 4. The speed range was 0-0.7m/s and the rolling of vehicle could be controlled within $pm5^{\circ}$ range. 5. From a series of tests, developed vehicle was found to be a useful tool for greenhouse works.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.749-754
• /
• 2021

In order to solve problems such as a decrease in the agricultural population and an aging population, research on agricultural robots is being actively conducted for the purpose of automating various agricultural tasks. The harvesting process is the most labor-intensive process among farm work and this process consumes about 2-3 times more compared to other processes. Since the transport of agricultural crops requires the most labor costs and there is a risk of injury during the operation, automating the transport operation through an agricultural robot can improve safety and significantly improve productivity. Therefore, this paper proposes an agricultural robot that is optimized for farm worksites and capable of autonomous driving.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.120-132
• /
• 2019

As a key infrastructure for positioning autonomous vehicles, HD maps are making efforts to equip autonomous vehicles and connect them with services worldwide. Global companies like Here and TomTom have contracted an agreement with three German automobile companies(BMW, Audi, Daimler) by establishing systems including from the production of HD maps to loading autonomous vehicles. Japan has organized a DMP(Dynamic Map Platform) by collaborating public and private section and performing establishment of HD map on private section-oriented. Korean companies related with autonomous vehicles are also cooperating with various companies such as vehicles, sensors and maps. But public and private sections are establishing HD maps respectively. Accordingly, Ministry of Land, Infrastructure and Transport implemented and signed memorandum for private and public cooperation in April 2019, Joint establishment council of HD map has launched in August 2019. This study performed domestic and foreign trend analysis about HD map and interviewed to related companies. And analyzed solutions for interactive cooperation of private and public section in HD map industry, purposed step-by-step strategy for operation and operation plan for joint establishment council of HD map.

• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.57-65
• /
• 2017

Neural network based AI computing is a promising technology that reflects the recognition and decision operation of human beings. Early AI computing processors were composed of GPUs and CPUs; however, the dramatic increment of a floating point operation requires an energy efficient AI processor with a highly parallelized architecture. In this paper, we analyze the trends in processor architectures for AI computing. Some architectures are still composed using GPUs. However, they reduce the size of each processing unit by allowing a half precision operation, and raise the processing unit density. Other architectures concentrate on matrix multiplication, and require the construction of dedicated hardware for a fast vector operation. Finally, we propose our own inAB processor architecture and introduce domestic cutting-edge processor design capabilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.340-345
• /
• 1998

A virtual reality system is implemented for the operator supervising a robot's operation at a remote site. For this implementation, a two D.O.F force-reflective joystick is designed to reflect the force/torque measured at the end of robotic manipulator and to generate the motion command for the robot by the operator using this joystick. In addition, the visual information that is captured by a CCD camera, is transmitted to the remote operator and is displayed on a CRT monitor. The operator who is holding the force reflective joystick and watching the CRT monitor can resolve unexpected problems that the robot confronts with. That is, the robot performs the tasks autonomously unless it confronts with unexpected events that can be resolved by only the operator. To demonstrate the feasibility of this system, a remote peg-in-hole operation is implemented and the experimental data are shown.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.441-442
• /
• 2022

This is a study on the design and operation software development of an accident response support service for MASS(maritime autonomous surface ship) that provides accident response support information according to ship accident classification when a ship accident occurs due to the operation of MASS