• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1003-1007
• /
• 1997

This study is na introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handling but welding and rivet are used to join permanently them even thought hard operation. Consequently, w have developed the screw for permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.792-795
• /
• 2000

The magnetic assisted finishing thought to be one of the potential methods for the automatic polishing process. In this study, magnetic assisted finishing process was experimentally attempted to polish the intrnal surface of the cylindrical tube. The newly developed magnetic tool was used, and its polishing performance exmined. From the experimental results, it is found that i ) the newly developed tool is suitable for intrnal surface finishing of the tube. ii ) the surface roughness of 0.9~1${\mu}{\textrm}{m}$Rmax before polishing is improved to the value of 0.2 ${\mu}{\textrm}{m}$Rmax in the finishing experiment of stainless steel STS3602L tube in 6 minutes finishing time.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.306-312
• /
• 2016

In general, the shape of a 3D printed object is not to be changed after the generation. Most changes, for example, contraction of a molten polymer after cooling is thought to be undesirable. 4D printing however tries to make benefit of a shape change after the part is generated. The shape change is required to be controllable in response to an external stimuli. These artifacts from 4D printing are called kinetic components which are defined as structures formed by combining inert materials and smart materials that change under certain stimuli. We propose a design software that can systematically calculate inert links with smart joints to follow the shape of the target design.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.113-118
• /
• 1997

본 연구에서는 해상누유의 시간변화에 따른 오염지역 예측을 위한 수학모델 및 수치기법을 제안하였다. 본 모델은 기름의 분자적인 확산 뿐만아니라 해수의 표층유동에 기인한 기름의 이동을 동시에 고려하는데 그 특징이 있다. 그리고, 실제 누유사고에의 보다 실용적이고 효율적인 응용을 위해 자동적으로 계산대상영역을 설정하는 격자수정방법을 도입하였다. 본 계산기법을 다양한 가상의 누유사고에 대해 적용해 본 결과, 매우 사실적인 누유오염지도를 얻을 수 있을 것으로 여겨진다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.210-214
• /
• 1998

Radio-Controlled helicopter has superior movement abilities like as hovering or backward move. So it has been used as a sprinkler of agricultural medicines or an observer of dangerous area such as a volcano, etc. But its operation is not simple because it has many control factors and they interfere with each other. Therefore the helicopter is not controlled by simple theory in the case of automatic operation. Then fuzzy sliding mode control, which has fastness, fineness and robustness, is thought to be suitable to satisfy various requirements of the helicopter operation. In this work, the fuzzy sliding mode control was applied to the flying of RC helicopter, As tile result, it was controlled with good performance.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1169-1172
• /
• 2006

The prices of chemical products are fluctuated by several factors. The chemical companies can't predict and be ready to all of these changes, so they are exposed to the risk of a profit fluctuation. But they can reduce this risk by making a well-diversified product portfolio. This problem can be thought as the optimization of the product portfolio. We assume that the profits come from the 'spread' between a naphtha and a chemical product. We calculate a mean and a variation of each spread and develop an automatic module to calculate the optimal portion of each product. The theory is based on the Markowitz portfolio management. It maximizes the expected return while minimizing the volatility. At last we draw an investment selection curve to compare each alternative and to demonstrate the superiority. And we suggest that an investment selection curve can be a decision-making tool.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.575-580
• /
• 2004

The latest equipment automatic Intelligence of digital base done large size equipment appear in succession. That run by voltage electric current(mA, mV, ${\mu}A,\;{\mu}V$) that outline is microscopic of action of accuracy large size equipment of this digital base is bulk. Have received influence that is great in river electric field by installment that use computer. Most of domestic working voltage from service entrance extra-high voltage and working voltage of commercial frequency 60Hz working voltage 220V that use our country outside 1 country in interior of 22.900V for semiconductor use computer use digital installment of appliance as well as various smalls of digital base, middle, large size that safety is these fine voltage electric current that is not enough direct admonition hundred vast damage give can. Also, already act in surge circle and impulse transient phenomena such as several thousands, myriads, strong bit error more than billions time to digital fine electronic circuit by mistake use of using electric facility system of system electric power.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.113-128
• /
• 2000

The purpose of this study was to serve as a basis for the development of dental technology and for creating a condition that dental technicians could work with pride and right values, by examining what problems there were in their health care, what they thought about them, and how the problems could be solved, The findings of this study were as below: 1. The most serious and harmful element in dental technology workshop was a dust(57.5%) and a noise(33.3%). 2. Approximately 99.0% of the dental technicians investigated made a complain of air pollution caused by noise. Their opinion on a possible measure to remove noise air pollution was that the noise-generating machine should be replaced(64.1%) or that it should be isolated(28.8%). 3. 76.0% complained air pollution cause by dust deteriorates their working efficiency. As a way to eliminate it, they suggested a dust chamber(35.3%) or an air cleaner(27.5%) should be installde. 4. About 80% made a complain of gas air pollution. The most common related symptom was a headache(56.9%). They thought that gas-generating machine should be isolated(39.9%) or that an air purifier should be prepared(33.3%). 5. The largest impact of heat and light on their body was weakening their eyesight(56.9%). 47.1% got burn once though four times, and 34.3% did five times or more. The way to prevent them was to install an automatic casting machine(66.0%) or use protective glasses(28.1%). 6. Approximately 47.7% were considering a change of occupation, and the most common reason was heavy work(23.5%), followed by poor prospect(21.6%) and working environment(19.0%) in the order named. 7. 88.9% responded they were likely to have an occupational disease. Their idea about the proper frequency of regular health examination was once a year(53.6%), or once per every six months(41.8%). 8. The field they were most interested in was health care(39.2%), followed by academic research activities(31.4%). This fact indicated it's most urgently required to improve their working environment.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 2023년도 제35회 한글 및 한국어 정보처리 학술대회
• /
• pp.448-453
• /
• 2023

대규모 언어 모델 (Large Language Model, LLM)을 인간의 선호도 관점에서 평가하는 것은 기존의 벤치마크 평가와는 다른 도전적인 과제이다. 이를 위해, 기존 연구들은 강력한 LLM을 평가자로 사용하여 접근하였지만, 높은 비용 문제가 부각되었다. 또한, 평가자로서 LLM이 사용하는 주관적인 점수 기준은 모호하여 평가 결과의 신뢰성을 저해하며, 단일 모델에 의한 평가 결과는 편향될 가능성이 있다. 본 논문에서는 엄격한 기준을 활용하여 편향되지 않은 평가를 수행할 수 있는 평가 프레임워크 및 평가자 모델 'FubaoLM'을 제안한다. 우리의 평가 프레임워크는 심층적인 평가 기준을 통해 다수의 강력한 한국어 LLM을 활용하여 연쇄적 사고(Chain-of-Thought) 기반 평가를 수행한다. 이러한 평가 결과를 다수결로 통합하여 편향되지 않은 평가 결과를 도출하며, 지시 조정 (instruction tuning)을 통해 FubaoLM은 다수의 LLM으로 부터 평가 지식을 증류받는다. 더 나아가 본 논문에서는 전문가 기반 평가 데이터셋을 구축하여 FubaoLM 효과성을 입증한다. 우리의 실험에서 앙상블된 FubaoLM은 GPT-3.5 대비 16% 에서 23% 향상된 절대 평가 성능을 가지며, 이항 평가에서 인간과 유사한 선호도 평가 결과를 도출한다. 이를 통해 FubaoLM은 비교적 적은 비용으로도 높은 신뢰성을 유지하며, 편향되지 않은 평가를 수행할 수 있음을 보인다.

• KIEAE Journal
• /
• 제12권2호
• /
• pp.93-101
• /
• 2012

In this study, we measured the Index of Greeness(I.O.G) and analyzed factors that affect in downtown street of Seoul. The aim of this article is to provide an ways of improving I.O.G, with an emphasis on accuracy of measurement. We utilized the autimatic measurment techniques proposed by Tonosaki to solve the problem of accuracy in measurement. The result is as follows : Firstly, the average I.O.G of Gwanghwamun Plaza is 15.76%, Jongno is 11.48% and Dasanro(from Yaksu station to Beotigogae station) is 6.36%. According to the comprehensive analysis in three reseach areas, it shows that I.O.G is intimately linked with planting method, species of trees and the presence of wall planting. Secondly, it was analyzed that grass and ground-cover planting promote I.O.G better than other method. The I.O.G of photo which contains grass is 45.47%. According to the comparative analysis between tree planting and multi-planting method, the presence of lower planting showed a difference about 8.77% of I.O.G.. From the persipective of I.O.G, tree planting with two lines is more effective than one. The difference of two ways is about 3.24%. Thirdly, it is an efficint way to use the wall planting or vertical planting in order to promote I.O.G.. In Dasanro, The I.O.G of photo which contains wall planting or vertical planting is 45.47% in contrast to the average of I.O.G. is 6.36%. Fourthly, the difference of I.O.G between broadleaf tree and needleleaf tree was larger than we thought. If look closely confined to this study, the I.O.G of street planted by Pine is 3.61% and Eastern Sycamore Family Bottonwood is 12.55%.