• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.43-51
• /
• 2004

In this paper, the element combination algorithm for designing an arbitrary type of the automatic transmissions is proposed. The powertrain simulation software using this algorithm is then developed. The deliveries of the angular velocities and torques are only considered for the motion characteristics of the automatic transmissions. The effects of the vibration and noise are not considered. The automatic transmission is defined by the basic elements, i.e., planetary gear set, clutch, brake, shaft, general gear, and inertia. The transmission system is defined by the combination of these elements. The element combination matrices automatically generate the equations of motion for each shift. The self error-correcting algorithm is also developed to verify the element combination algorithm. This automotive powertrain simulation/design software with user-friendly graphic user interface has two main modules. The first module, the automatic powerflow generation module, mainly consists of the automatic powerflow and component generation algorithms. This paper covers the theory and application for the first module. The second module deals with the automatic system generation algorithm and will be discussed in the second paper.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1823-1831
• /
• 2010

This paper proposes an automatic tracking control algorithm for efficiency improvement of photovoltaic generation. Increasing the power of PV systems should improve the efficiency of solar cells or the power condition system. The normal alignment of the PV module always have to run perpendicular to the sun's rays. The solar tracking system, able to improve the efficiency of the PV system, was initiated by applying that to the PV power plant. The tracking system of conventional PV power plant has been studied with regard to the tracking accuracy of the solar cells. Power generation efficiency were increased by aligning the cells for maximum exposure to the sun's rays. Using a perpendicular position facilitated optimum condition. However, there is a problem about the reliability of tracking systems unable to not track the sun correctly during environmental variations. Therefore, a novel control algorithm needs to improve the generation efficiency of the PV systems and reduce the loss of generation. This control algorithm is the proposed automatic tracking algorithm in this paper. Automatic tracking control is combined the sensor and program method for robust control in environment changing condition. This tracking system includes the insolation, rain sensor and anemometer for climate environment changing. Proposed algorithm in this paper, is compared to performance of conventional tracking control algorithm in variative insolation condition. And prove the validity of proposed algorithm through the experimental data.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.137-146
• /
• 2002

In this paper, a path generation algorithm that uses sensor scannings is described. A scanning algorithm for recognizing the ambient environment of the Automatic Guided Vehicle (AGV) that uses the information from the sensor platform is proposed. An algorithm for computing the real path and obstacle length is developed by using a scanning method that controls rotating of the sensors on the platform. The AGV can recognize the given path by adopting this algorithm. As the AGV with two-wheel drive constitute a nonholonomic system, a linearized kinematic model is applied to the AGV motor control. An optimal controller is designed for tracking the reference path which is generated by recognizing the path pattern. Based on experimental results, the proposed algorithm that uses scanning with a sensor platform employing only a small number of sensors and a low cost controller for the AGV is shown to be adequate for path generation.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.553-563
• /
• 1996

An algorithm for automatic mesh generation of two-dimensional arbitrary planar domain is proposed by using Delaunay triangulation algorithm. An efficient algorithm is proposed for the construction of Delaunay triangulation algorithm over convex planar domain. From the definition of boundary, boundary nodes are first defined and then interior nodes are generated ensuring the Delaunay property. These interior nodes and the boundary nodes are then linked up together to produce a valid triangular mesh for any finite element analysis. Through the various example, it is found that high-quality triangular element meshes are obtained by Delaunay algorithm, showing the robustness of the current method. The proposed mesh generation scheme has been extended to automatic remeshing, which is applicable to FE analysis including large deformation and large distortion of elements.

• 한국CDE학회논문집
• /
• 제5권1호
• /
• pp.95-101
• /
• 2000

For last two decades numerous automatic mesh generation algorithms for various two dimensional objects have been introduced continuously and among them triangular mesh generation schemes have been majority because of efficiency and controllability. In our study, an existing triangular mesh generation algorithm developed by Lo is totally modified to more improve node distribution, element shape, and objects shape independency. ft is composed of node generation part and element generation part. In order to find a suitable node position within geometry, the suggested algorithm searches desirable positions of points within boundary and optimizes node position to generate comparatively well-shaped elements. More over, the suggested algorithm handles various complex two dimensional objects and its meshing speed shows superiority to those of the existing triangulation mesh generation algorithms. It is fully automated in a sense of constructing object boundary and hence can be directly used as an independent meshing software.

• 전산구조공학
• /
• 제9권3호
• /
• pp.145-155
• /
• 1996

이 논문은 평면 상의 영역 경계와 조절선(control curve)에 맞추어서 요소망을 자동 생성하는 알고리즘을 제시하는데 목적이 있다. 여기서 제안하는 알고리즘은 요소망 생성 영역의 경계와 조절선들을 하나의 수퍼 루프(super loop)로 연결하고, 루프(loop)위에 있는 두 절점을 연결하는 최소벌점(minimum penalty)의 경로를 따라서 순환적으로 분할하여 요소를 생성하는 기법에 바탕을 두고 있다. 이 방법은 요소망 생성영역의 형상에 제한이 없으며, 모든 과정을 쉽게 자동화 할 수 있기 때문에 복잡한 영역의 요소망을 최소한의 사용자 개입을 통해서 간편하게 처리할 수 있는 프로그램으로 쉽게 이행할 수 있다. 이 알고리즘은 곡면 요소망 생성이나, 적응적 요소망 생성등에 쉽게 확장하여 적용할 수 있다.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.145-153
• /
• 1995

An algorithm for the automatic generation of quadrilateral shell elements on three-dimensional sculptured surfaces has been developed, which is one of the key issues in the finite element analysis of structures with complex shapes such as automobile structures. Mesh generation on sculptured surfaces is performed in three steps. First a sculptured surface is transformed to a projection plane, on which the loops are subdivided into subloops by using the best split lines, and with the use of 6-node/8-node loop operators and a layer operator, quadrilateral finite elements are constructed on this plane. Finally, the constructed mesh is transformed back to the original sculptured surfaces. The proposed mesh generation scheme is suited for the generation of non-uniform meshes so that it can be effectively used when the desired mesh density is available. Sample meshes are presented to demonstrate the versatility of the algorithm.

• 대한임베디드공학회논문지
• /
• 제8권2호
• /
• pp.69-78
• /
• 2013

As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.2995-3006
• /
• 1993

An automatic mesh generation scheme has been developed for finite element analysis with two-dimensional, quadrilateral elements. The basic strategies of the method are to transform the analysis domain into loops with key nodes and the loops are recursively subdivided into subloops with the use of best split lines. Finally by using the basic loop operators, the meshes are completed. In this algorithm an eight-node loop operator is proposed, which is useful in the area where the change of element size is large and the splitting criteria for subdividing the loops have also been modified to the existing algorithms. Lines, arcs, and cubic spline curves are used to define the boundaries of analysis domain. Sample meshes for several geometries are presented to demonstrate the robustness of the algorithm.