• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.1-3
• /
• 1999

The implementation of the compact gearless elevator system with Permanent Magnet Synchronous Motor is presented. For the purpose of the voltage suppression in the motor input side, the LRC filter is used. The automatic encoder alignment algorithm with rotor pole position is developed, and it is available in the full range of the load. The implemented system makes 11% energy savings comparing the system with the induction motor.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.06a
• /
• pp.309-314
• /
• 2000

본 논문에서는 양국어로 된 병렬 코퍼스로부터 복합어의 역어를 추출하기 위한 정렬 방법을 제시한다. 여기에서는 개념어에 대한 양국어 공기정보를 사용하여 기본 정렬을 하고, 인접한 개념어로 정렬의 단위를 확장했다. 또한 재추정 기법을 사용하여 대역 확률을 계산함으로써 보다 높은 정확률을 얻을 수 있었다. 본 논문에서 제안한 방법을 적용하여 139,265개의 영어 어절로 이루어진 우루과이 라운드 영한 병렬 코퍼스에 대해서 실험한 결과 2,290개의 대역어쌍을 얻었고, 그 정확률은 74%였다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.375-377
• /
• 2003

In this study, we employ the control patches, which have been created in previous photogrammetric projects, serving for the candidates of the control points that are likely to be found in the newly taken photos by utilizing image matching technique. Among others, the successful implementation of the above idea lies in the underlying factors: (1). Predicting the control patches and projecting them onto new photos; (2). Alignment of control patches with respect to the new photos; (3). Generating the equivalent ground elements of control patches versus the new photos for the purpose of correlation; (4). Developing effective matching methods and matching strategy; (5). Refining the exterior orientation parameters. What may show significance in this work comparing to traditional aerial-triangulation chain is that whenever at least three matched control patches succeed in a single photo, it follows that single photo orientation is applicable. The experiments suggest the potential efficiency of automatic control point measurement from control patch database and photo orientation by the proposed workflow.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.23-30
• /
• 2004

Ontologies play an important role in the Semantic Web by providing well-defined meaning to ontology consumers. But as the ontologies are authored in a bottom-up distributed mimer, a large number of overlapping ontologies are created and used for the similar domains. Ontology sharing and reuse have become a distinguished topic, and ontology merging and alignment are the solutions for the problem. Ontology merging and alignment algorithms previously proposed detect conflicts between concepts by making use of only local syntactic information of concept names. And they depend only on a semi-automatic approach, which makes ontology engineers tedious. Consequently, the quality of merging and alignment tends to be unsatisfying. To remedy the defects of the previous algorithms, we propose a new algorithm for ontology merging and alignment which uses local and global semantic set of a concept. We evaluated our algorithm with several pairs of ontologies written in OWL, and achieved around 91% of precision in merging and alignment. We expect that, with the widespread use of web ontology, the need for ontology sharing and reuse ill become higher, and our proposed algorithm can significantly reduce the time required for ontology development. And also, our algorithm can easily be applied to various fields such as ontology mapping where semantic information exchange is a requirement.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.761-772
• /
• 2020

This paper presents an automatic proficiency assessment method for a non-native Korean read utterance using bidirectional long short-term memory (BLSTM)-based acoustic models (AMs) and speech data augmentation techniques. Specifically, the proposed method considers two scenarios, with and without prompted text. The proposed method with the prompted text performs (a) a speech feature extraction step, (b) a forced-alignment step using a native AM and non-native AM, and (c) a linear regression-based proficiency scoring step for the five proficiency scores. Meanwhile, the proposed method without the prompted text additionally performs Korean speech recognition and a subword un-segmentation for the missing text. The experimental results indicate that the proposed method with prompted text improves the performance for all scores when compared to a method employing conventional AMs. In addition, the proposed method without the prompted text has a fluency score performance comparable to that of the method with prompted text.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

Recently, there is developed various antenna's models due to increment of wireless communication the need of quantitative study on antenna's measuring technology gets to highlight. In this paper, we propose algorithm of antenna's edge alignment for making automatic measuring system of antenna's characteristics of near-field measurement system of antenna. The proposed algorithm gets the bottom image of antenna from camera, extracts antenna object, and finds the boundary the object. The proposed algorithm calculates distortion of the object using the extracted boundary and the angle to correct this. The proposed algorithm is applied to the standard gain horn antenna. The results show that antenna's object is efficiently extracted and the angle for correcting the error is calculated.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.275-280
• /
• 2004

In this paper, we propose automatic subtraction radiography algorithms to overcome conventional subtraction radiography's defects by applying image processing technique. In order to reach these goals, this paper suggests the image alignment method that is necessary for getting subtraction image and ROI(Region Of Interest) focused on a selection method using the structure characteristics in target images. Therefore, we use these methods because they give accurary, consistency and objective information or data to results. According to the results, easily and visually we can identify fine difference int the affected parts wether they have problems or not.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1055-1062
• /
• 1996

A method for automatically driving paddy vehicles, such as rice transplanters, etc., straight ahead in a paddy field was investigated . The direction of such vehicles must be precisely controlled to do the operations as straight. However, the alignment of the from wheels becomes distorted due to the unevenness of the ground, preventing the vehicle form going straight. If the proper alignment of the front wheels is maintained , the vehicle can be driven straight ahead greater precision. To investigate the influence of the ground uneveness, the behavior of a paddy vehicle running over an obstacle was quantified. The left wheel ran over an obstacle on a flat concrete road surfaced. When the steering wheel was free, the front wheels were forced toward the left when vehicle went up the obstacle and toward the right when the vehicle went down it. The torsion of the wheel when the vehicle went down the obstacle was larger than that when it went up ,so it turned right 5 degrees. Sinc hydraulic control steering decreased the steering angle , it turned right 3 degrees. These results suggest that a vehicle can be driven straight ahead with high precision when the steering angle is changed in response to the direction and inclination of the vehicle . Such results were obtained in a paddy field tests.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.479-486
• /
• 2012

This paper presents a high-speed automatic micro-alignment system that is a part of an inspection machine for small-sized molded lenses of mobile phones, palm-top computers, and so on. This work was motivated by the shortcomings of existing highest-grade commercial machine. A simple tip/tilt/Z parallel mechanism is designed based on kinematic couplings, which is a 3-degree-of-freedom (3-DOF) moderate-cost alignment stage. It is used to automatically adjust the posture of each lens on the tray, which is impossible by the conventional instrument. Amplified piezoelectric actuators are used to ensure the accuracy and dynamic response. Forward kinematic analysis and simulation show that the parasitic motion is small enough compared to the actuator stroke. From the workspace analysis of the moving platform, it is clear that the output motion range satisfies the design requirements.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.465-469
• /
• 2006

In recent years there has been considerable interest in the construction of super high-rise buildings. From the prior art, various procedures and devices for surveys during and after the phase of erection of a high-rise building are known. High-rise buildings are subject to strong external tilt effects caused, for instance, by wind pressures, unilateral thermal effects by exposure to sunlight, and unilateral loads. Such effects are a particular challenge in the phase of construction of a high-rise building, in as much as the high-rise building under construction is also subject to tilt effects, and will at least temporarily lose its - as a rule exactly vertical - alignment. Yet construction should progress in such a way that the building is aligned as planned, and particularly so in the vertical, when returning into an un-tilted basic state.It is essential that a straight element be constructed that theoretically, even when moving around its design centre point due to varying loads, would have an exactly vertical alignment when all biasing conditions are neutralised. Because of differential raft settlement, differential concrete shortening, and construction tolerances, this ideal situation will rarely be achieved. This paper describes a procedure developed by the authors using GPS observations combined with a network of precision inclination sensor to provide reliable coordinated points at the top of the worldwide highest-rise building under construction in Dubai.