• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.451-458
• /
• 2010

To detect and recover packet losses over wireless links is very important in terms of reliability in packet transmission. Most wireless communication systems adopt an automatic repeat request (ARQ) protocol operating at link layer. However, it has been constantly addressed that the interaction not harmonized sufficiently between ARQ and TCP rather degrades TCP performance. In this paper, therefore, we propose an improved scheme from the aspect of the interaction with TCP loss recovery mechanism that can be applied to selective repeat ARQ (SR-ARQ) protocol and prove that the proposed scheme improves TCP performance significantly by OPNET simulations.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.210-216
• /
• 2009

Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Recently, narrow and long surround molding parts around door frame are applied to high grade automobiles, but there are great difficulties in their die development, construction and tryout because of several springback modes including vertical movement and twist during flange forming process of them. So it is very important to predict springback's quantities of a surround molding part and, moreover, to compensate the die for them adequately, when they can't be corrected by the restrike operation. This paper presents a case study based on the die design for a surround molding part made of stainless steel. The forming and springback predictions, carried out using PAMSTAMP 2G, are reported and compared with the measurement data of the prototype. The predicted springback results were acceptable, so the processes of compensating die using Automatic Die Compensation Module of PAMSTAMP 2G were performed iteratively until the tolerances between the designed shape and the simulation data were satisfied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• Journal of Digital Policy
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2022

The objective of this study was to examine the effectiveness of newly developed program for the recovery and relapse prevention in patients with anxiety disorder. Twenty-four patients with anxiety disorder received Mindfulness-Based Cognitive Therapy (MBCT) session weekly for a period of overall 8 weeks-program. Changes of depression, anxiety, negative and positive automatic thought were compared before and after the program. Depression and anxiety were improved significantly after the MBCT program(Z=-1.9, p=.06, Z=-2.9, p<.001). Conclusions: MBCT may be effective at reducing negative automatic thought and relieving anxiety and depressive symptoms in patients with anxiety disorder. However, large-sample, randomized controlled trials will be needed for generalization.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.8-15
• /
• 2010

The purpose of this research is to check the validation of an auto-analysis method combined with aqua regia digestion apparatus for improvement of water distillation method used as a fluorine test of soil. Fluorine contents of CaO used in the pretreatment course of water distillation method were 120 mg/kg ~ 5,064 mg/kg at the blank test, which was exceeded up to maximum 12.5 times of the soil standard, so it was estimated due to a effect of fluorine existing as impurities of CaO. The recovery test of the same samples indicated that water distillation method and auto-analysis method were 134.5mg/kg and 161.7mg/kg respectively, the recovery ratio of the latter was 16.8% higher than the formal. The validation test of two methods satisfied the standard, but auto analysis method was excellent more than distillation method. Also, auto analysis method could save a analysis time up to maximum 4.7 times by comparison with water distillation method.

• Korean Journal of Animal Reproduction
• /
• v.12 no.1
• /
• pp.24-30
• /
• 1988

These experiments were carried out to develop new techniques for In Vitro separatin of X-and Y-bearing spermatozoa. The bull semen was applied to the various Gel-Columns filled with swellen Sephadex G-50 Fine and then elutriated wtih Locke solution (elutriation rate; 1ml/3-4min., 1ml/1-2min.). Elutriated solution was fractionated into 1ml by automatic Fraction Collector and spermatozoa included in each fraction were subjected to the estimation of viability and recovery rate, and to B-body test. The results obtained in these experiments were summarized as follows: 1. When the column size and the elutriation rate were adjusted to 15$\times$1.6cm and 1ml/3-4min., respectively, the highest sperm concentration was obtained from the 8th to the 12th fraction. 2. As a trend, the viability of spermatozoa was improved by chromatography, and the degree of improvement ranged 5 to 10 percentage. 3. The average recovery rate of spermatozoa applied to column was 73.2 percentage and ranged 52.6 to 81.3 percentage. 4. The lowest rate of B-body bearing spermatozoa following chromatography was obtained when the column size and the elutriation rate were adjusted to 15$\times$0.8cm and 1ml/1-2min., respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.34-41
• /
• 1998

In this paper, we evaluate synchronization techniques suitable for high-speed ATM satellite communications with a transmission rate of 155Mbit/s, and propose optimal algorithms that improve the tracking performance, where QPSK is selected for a modulation scheme, and the receiver is operated in burst mode. Based on these asumptions, we proposed modified algorithms and architectures for automatic frequency control(AFC), carrier recovery(CR), and symbol timing recovery(STR) for burst acquisition. Analysis is performed under AWGN environments with respect to the number of required symbol, steady-state stability, and hardware implementation for the proposed algorithms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1348-1353
• /
• 2002

The purpose of this study was to evaluate the changes and readjustment capacity in the hematological characteristics of the horse during and after a prolonged training program. One pony and two hot-blooded horses were used in this study. Resting or basal blood parameters were assessed by collecting blood samples of the animals for 1 to 2 months prior to start of the training program. Each animal was subjected to arbitrary exercise for 30 min by an automatic hot trotter and was bled at 0, 15, 30, 45 (15 min of recovery), 60 (30 min of recovery), and 75 min (45 min of recovery) after onset of exercise. All animals were exercised 3 times a week over a fivemonth period. Hematological parameters including average white blood cell counts (WBC, ${\times}$$10^3$/$\mu$l), erythrocyte concentrations (RBC, ${\times}$$10^6$/$\mu$l), hematocrit (HCT, %), mean corpuscular volume (MCV, fl), number of platelets (PLT, ${\times}$$10^4$/$\mu$l), hemoglobin concentration (Hb, g/dl), mean corpuscular hemoglobin (MCH, pg), and mean corpuscular hemoglobin concentration (MCHC, g/dl) were analyzed using an automatic cell counter. All animals showed that RBC, WBC, and HCT were significantly (p<0.05) increasing from 7.09, 8.55, and 43.5 to 8.11, 9.67, and 49.5, respectively, during the 30 min of exercise and were back to or lower than the initial basis (resting and 0 min) 30 min after exercise. However, no significant differences were detected in MCV (50.3-51.3 fl), MCH (17.2-17.4 pg), and MCHC (33.7-34.4 g/dl) values (p>0.05) regardless of the training periods. Similar trends were observed after 1, 3, 4, and 5 months of training when compared to the resting state. When these parameters were analyzed by the effect of training periods (month), mean WBC concentrations significantly reduced in the fourth and fifth month after onset of training compared to that in resting condition or the first month of training program (p<0.05). The RBC values elevated at the second month (9.40) and reaching a significantly low level (p<0.001) at the fifth month (8.62) after training compared to the first month of training (7.89). In conclusion, a mild training program enhances blood parameters gradually in both the horse and the pony. Therefore, an optimized training program is beneficial in promoting the endurance performance of the horse.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.49-61
• /
• 1983

U shape multitube heat exchanger was equipped in the flue to recover the exhaust heat from the boiler system. The fluids of the exhaust heat recovery equipment were the flue gas as the hot fluid, and the water as the cold fluid. The flow geometry of the fluids was cross flow - two pass, the hot fluid being mixed and the cold fluid unmixed. The results of the theoretical and the experimental analysis and the economic evaluation are summarized as follows. 1) The heat exchanger effectiveness and the temperature efficiency of the hot fluid were about 35% when the fuel consumption rate was 140 - 150 L/15min. The temperature efficiency for the cold fluid ranged from 3.0% to 4.5%. The insulation efficiency ranged from 85% to 98%, which was better than the KS air preheater insulation efficiency of 90%. 2) The relationship between the fuel consumption rate, F, and the outlet temperature, $T_{h2}$, of the flue gas from the heat exchanger was $T_{h2}$ = 0.927F + 110. In order to prevent the low temperature corrosion from the coagulation of $SO_3$, it is necessary to maintain the fuel consumption rate above 82 L/15min. 3) The ratio of the exhaust heat from the boiler system to the total energy consumption was about 14.5%. With the installation of the exhaust heat recovery equipment, the energy recovery ratio to the exhaust heat was about 25%. Accordingly, about 3.6% of the total fuel consumption was estimated to be saved. 4) Economic analysis indicated that the installation of the exhaust heat recovery equipment was feasible to save the energy, because the capital reocvery period was only 10 months when the fuel consumption rate was 80 L/15min. 4 months when it was 160 L/15min. 5) Based on the theoretical and the experimental analysis, it was estimated to save the energy of about 18 million Won per year, if four heat exchangers are installed in a factory. 6) A further study is recommended to identify the relationship among the flow rate of the exhaust gas, the size of the heat exchanger and the capacity of the air preheater. For a maximum heat recovery from the exhaust gas an automatic control system is required to control the flow rate of the cold fluid depending on the boiler load.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.18-26
• /
• 2001

In this paper, we propose an ATC(Automatic Transfer mode Controller) algorithm and an average-mode-change method for use in Gear shift PLL which can automatically change loop gain. The proposed ATC algorithm accurately detects proper timing or the mode change and has a very simpler structure - than the conventional lock detector algorithm often used in QPSK. And the proposed average mode change method can obtain low errors of estimated frequency offset by averaging the loop filter output of frequency component in shift register. These algorithms are also useful in designing ASIC, since these algorithms occupy small circuit area and are adaptable for high speed digital processing. We also present phase tracking performance of proposed Gear-shift PLL, which is composed of polarity decision PD, ATC and average mode change circuit, and analyze the results by examining constellation at each mode.