• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.23-33
• /
• 2018

In the general manual feeder of an LED lighting assembly system, many workers are needed to supply parts to the main conveyor. The automatic feeder for modern automation lighting assembly systems consists of a completely automated feeding system and a magazine system that supplies the parts automatically. A standardized LED panel and diffusion cover is stacked in the cartridge of the magazine system. The structural safety of the automatic feeding system with regard to handling the load from the panels and covers stored in the cartridge should be guaranteed. LED convergency lighting modules are assembled using two LED panels and one diffusion cover in an automatic feeder. In this study, the structural safety and fatigue life of the automatic feeder and magazine were analyzed by considering the load generated in the automatically assembled LED convergency lighting system. In addition, the dynamic behavior of each auto-feeding system and magazine delivery system was visualized, and the working process was evaluated via dynamic simulation using a virtual engineering method. A tack time table for automatic feeding systems was derived by developing a virtual prototype.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.329-332
• /
• 2019

Recently, smart lighting systems are the combination between sensors and lights. These systems turn on/off and adjust the brightness of lights based on the motion of object and the brightness of environment. These systems are often applied in places such as buildings, rooms, garages and parking lot. However, these lighting systems are controlled by lighting sensors, motion sensors based on illumination environment and motion detection. In this paper, we propose an automatic lighting control system using one single camera for buildings, rooms and garages. The proposed system is one integration the results of digital image processing as motion detection, hand gesture detection to control and dim the lighting system. The experimental results showed that the proposed system work very well and could consider to apply for automatic lighting spaces.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.161-166
• /
• 2006

In this paper, an automatic lighting control system is developed using microprocessor. The developed system consists of a digital lighting control unit, an analog lighting control unit, and a lighting control simulator. In the developed system, ATMega128 is used as the main controller. The developed digital lighting control unit consists of eight modules and the developed analog lighting control unit consists of six modules respectively. Additional, the developed simulator consists of a digital and an analog lighting control simulation using graphic user interface. And so this developed system can be applied to the controller design of the interior and exterior lighting equipment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.151-155
• /
• 2004

In this paper, an automatic lighting control system is developed using micom. The developed system consists of digital lighting control system, analog lighting control system and simulator. In the developed system, ATMega128 is used as the main controller. The developed digital lighting control system consist of eight parts and the developed analog lighting control system consist of six parts respectively. Additional, the developed simulator consist of analog and digital simulation using graphic user interface.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.185-199
• /
• 1994

This study has been performed to present a new automatic tool wear measurement by digital image processing. The purpose of this paper is to develop an automatic tool wear measuring system based on the image processing which can be applied to the quasi-real time measurement of the characteristics of insert tip in turning. Tool wear monitoring is one of the key-problems, for the development of control systems of modern unmanned factory which are not completely solved now. In oredr words at present complete qualitative and quantitative information on tool wear morphology is required, at least on the following aspects : flank wear, its dimensions and distribution on the maximum and mean values on VB pqrqmeter in the various zones of the wearland. crater wear, its main dimensions and values of KT parameters. This research has been performed to this technique made possible by designing a proper lighting system to the worn tool with following features : The flank wear is measured by observing the active cutting part from a proper direction and by lighting the wearland by a diffuser optic system. The crater wear is visualized by lighting the tool by a He-Ne gas laser system developed in this study. By means of this system it is research to evaluate classical parameters of tool wear and to have complete information about tool wear morphology.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.70-76
• /
• 2005

It is known that natural awakening of us in the morning is due to stimulation of the reticular activation system through biological clock in the suprachiasmatic nucleus of hypothalamus by the morning sunlight. If we sleep at dark rooms without windows and so without morning sunlight, thus, it is not easy fur us to get up refreshingly in the morning. In this paper, we propose an automatic sunrise household lighting system that helps us fer getting up cheerfully in the morning even if we sleep in dark rooms without morning sunlight. The proposed lighting system is an embedded system that turns automatically on the electric lamp and makes it brighter and brighter coincidently with the actual sunrise. The proposed system is composed of a PIC microcontroller with flash memory, a real-time clock IC, a D/A converter, an amplifier, a dimmer unit, a light bulb, a display panel and a keyboard. The validity of the proposed intelligent lighting system is demonstrated via a prototype production and experimentation.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.31-36
• /
• 2015

In this paper, an LED lighting system that is capable of automatic or maunal dimming control using a ultrasonic sensor and Bluetooth wireless communication technology is presented. The LED lighting system consists of a ultrasonic sensor, microcontroller unit, Bluetooth wireless communication, LED driver, and LED light source. By using the implemented LED lighting system sample, it is shown that the automatic and manual dimming control is realized. By using the ultrasonic sensor, the LED lighting is automatically brighter or dimmer depending on the distance between the sensor and an object. When using a smartphone that includes Bluetooth wireless communication function, one can not only manually control the brightness of the LED lighting from level 1 to 10, but also monitor the distance between the sensor and object on the smartphone.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.61-69
• /
• 2008

본 논문에서는 고공시설물인 태양집광판을 사용한 가로등의 집광효율과 유지보수 성능 향상을 위한 자동 승하강 장치를 설계 제작하였다. 자동 승하강장치는 태양집광판을 사용한 가로등과 유기적으로 동작가능하곤 태양집광판의 집광 각도를 조절하여 집광효율을 향상시킬 수 있다. 또한 태양집광판과 가로등을 쉽게 탈부착할 수 있는 구조로써 유지보수가 용이하도록 하였다. 자동 승하강장치를 장착한 태양집광판을 사용한 가로등을 활용함으로써 태양집광판의 집광효율 향상에 따른 가로등의 조명효율을 향상시킬 수 있고, 가로등의 유지보수 비용 절감 및 교체작업 시간 동안의 교통 정체현상 등을 예방할 수 있을 것으로 기대된다.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.147-153
• /
• 2014

본 논문에서는 안드로이드 플랫폼 기반의 스마트 감성조명 제어 시스템을 제안한다. 제안된 스마트 감성조명제어 시스템은 안드로이드 플랫폼, 감성조명 장치, 확장 디바이스와 지그비 모듈을 사용하였다. 안드로이드 플랫폼 기반의 스마트 감성조명 제어 시스템은 조도센서를 이용하여 자동제어와 수동제어 선택이 가능하며, 원하는 조명만을 선택하여 부분적인 제어도 가능하게 설계하였다. 제안된 스마트 감성조명 제어 시스템의 실험 결과 필요로 하는 부분의 조명기기 제어와 색온도 가변에 의한 제어가 가능하였고, 감성어휘에 의한 가변점등으로 효율적으로 기존 감성조명 제어 시스템보다 전력 소비를 감소시켰다. 그리고 상황에 적합한 색상과 밝기를 제어하여 사무실에서 행위를 함에 있어 집중력과 업무능력 향상에도 효과적인 제어가 가능하였다.