• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.77-95
• /
• 2023

In this study, the conceptual design of a tilt + stopped rotor type electric vertical take-off and landing (eVTOL) aircraft was performed using design iteration. Based on Hyundai Motor's S-A1, the mission profile was defined using the concept of urban air mobility (UAM), and configuration design and aerodynamic analysis were performed using OpenVSP and XFLR5 software. After estimating the required power for the designed eVTOL, the required performance of the battery and the maximum take-off weight (MTOW) were calculated. . It was iteratively calculated using Microsoft Excel and Visual Basic Application, and a new electric motor weight estimation formula was derived. Also, the sensitivity analyses of each design variables of an eVTOL was performed using the automated program.

• Dementia and Neurocognitive Disorders
• /
• v.23 no.3
• /
• pp.127-135
• /
• 2024

Background and Purpose: To ensure data privacy, the development of defacing processes, which anonymize brain images by obscuring facial features, is crucial. However, the impact of these defacing methods on brain imaging analysis poses significant concern. This study aimed to evaluate the reliability of three different defacing methods in automated brain volumetry. Methods: Magnetic resonance imaging with three-dimensional T1 sequences was performed on ten patients diagnosed with subjective cognitive decline. Defacing was executed using mri_deface, BioImage Suite Web-based defacing, and Defacer. Brain volumes were measured employing the QBraVo program and FreeSurfer, assessing intraclass correlation coefficient (ICC) and the mean differences in brain volume measurements between the original and defaced images. Results: The mean age of the patients was 71.10±6.17 years, with 4 (40.0%) being male. The total intracranial volume, total brain volume, and ventricle volume exhibited high ICCs across the three defacing methods and 2 volumetry analyses. All regional brain volumes showed high ICCs with all three defacing methods. Despite variations among some brain regions, no significant mean differences in regional brain volume were observed between the original and defaced images across all regions. Conclusions: The three defacing algorithms evaluated did not significantly affect the results of image analysis for the entire brain or specific cerebral regions. These findings suggest that these algorithms can serve as robust methods for defacing in neuroimaging analysis, thereby supporting data anonymization without compromising the integrity of brain volume measurements.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.554-568
• /
• 2021

Forests are the largest carbon (C) sinks in terrestrial ecosystems. Recently, as enhancing forest C sequestration capacity has been proposed as a basic direction of the Republic of Korea's "2050 Carbon Neutral Strategy," accurate estimation of forest C sequestration has been emphasized. According to the Intergovernmental Panel on Climate Change guidelines, sequestration quantity is calculated from changes in C stocks in forest C pools, such as biomass, deadwood, litter and soil layer, and harvested wood products. However, in Korea, only the overstory biomass increase is now considered the amount of sequestration quantity, so there can be a significant difference from the actual forest C sequestration. In this study, we quantified forest C exchange through C flux measurement using an eddy covariance system and an automated soil chamber system in a 57-year-old Korean pine plantation located in Mt. Taehwa, Gwangju-si, Gyeonggi-do. Then, the net amount of C sequestration was compared with the amount of the overstory biomass increase. We estimated the annual C stock change in the remaining C pools by comparing the net sequestration amount from the C flux measurement with the overstory biomass increase and C stock change in the litter layer. Therefore, the net C sequestration of the Korean pine plantation estimated from the flux measurement was 5.96 MgC ha^-1, which was about 2.2 times greater than 2.77 MgC ha^-1 of the overstory biomass increase. The annual C stock increase in the litter layer was estimated to be 0.75 MgC ha^-1, resulting in a total annual C stock increase of 2.45 MgC ha^-1 in the remaining C pools. Our results indicate that the domestic forest is a larger C sink than the current methods, implying that more accurate calculations of the C sequestration capacity are necessary to quantify C stock changes in C pools along with the C flux measurement.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.63-63
• /
• 2003

Purpose: Planning target volume (PTV) for tumors in abdomen or thorax includes enough margin for breathing-related movement of tumor volumes during treatment. We developed a simple and handy method, which can reduce PTV margins in patients with moving tumors, respiratory motion reduction device system (RMRDs). Materials and Methods: The patients clinical database was structured for moving tumor patients and patient setup error measurement and immobilization device effects were investigated. The system is composed of the respiratory motion reduction device utilized in prone position and abdominal presser (strip device) utilized in the supine position, moving phantom and the analysis program, which enables the analysis on patients setup reproducibility. It was tested for analyzing the diaphragm movement and CT volume differences from patients with RMRDs, the magnitude of PTV margin was determined and dose volume histogram (DVH) was computed using a treatment planning software. Dose to normal tissue between patients with RMRDs and without RMRDs was analyzed by comparing the fraction of the normal liver receiving to 50% of the isocenter dose(TD50). Results: In case of utilizing RMRDs, which was personally developed in our hospital, the value was reduced to $5pm1.4 mm$, and in case of which the belt immobilization device was utilized, the value was reduced to 3$pm$0.9 mm. Also in case of which the strip device was utilized, the value was proven to reduce to $4pm.3 mm$0. As a result of analyzing the TD50 is irradiated in DVH according to the radiation treatment planning, the usage of the respiratory motion reduction device can create the reduce of 30% to the maximum. Also by obtaining the digital image, the function of comparison between the standard image, automated external contour subtraction, and etc were utilized to develop patients setup reproducibility analysis program that can evaluate the change in the patients setup. Conclusion: Internal organ motion due to breathing can be reduced using RMRDs, which is simple and easy to use in clinical setting. It can reduce the organ motion-related PTV margin, thereby decrease volume of the irradiated normal tissue.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.108-114
• /
• 2012

Purpose: Immunosorbent assay most commonly used in the laboratory and commercial third-party quality control material is a substance that provided by BIO-RAD. However, in Reference Sheet by radioimmunoassay test kit or a measuring device for the mention of Acceptable Range is somewhat lacking. Radioimmunoassay for the inspection of test results by setting Acceptable Range to increase the objectivity of the recommendations on the data accumulated by the manufacturer listed in the Reference Sheet is to be issued. Materials and Methods : In our hospital since 2009 partially BIO-RAD using quality control materials in 2011, excluding certain items, some items were most of the BIO-RAD third-party quality control materials are used. Thus, internal quality control data accumulated BIO-RAD's Unity Real Time program by using the items were measured. Results : BIO-RAD using quality control material items were about 50 of the 20 Point Data averages, standard deviations, variation coefficients were calculated to measure the Acceptable Range of kit, automated immunoassay attributed Roche Elecsys / E170 / cobas e Systems the measures and compared. Conclusions : BIO-RAD QC materials commonly used hospital and peer group by setting the measurement kit, suitable for laboratory equipment for radioimmunoassay of Acceptable Range manufacturer recommendation to increase the objectivity of the test results by national and international recognition for radioimmunoassay should seek to increase.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.453-462
• /
• 2009

Studies on software plagiarism detection, prevention and judgement have become widespread due to the growing of interest and importance for the protection and authentication of software intellectual property. Many previous studies focused on comparing all pairs of submitted codes by using attribute counting, token pattern, program parse tree, and similarity measuring algorithm. It is important to provide a clear-cut model for distinguishing plagiarism and collaboration. This paper proposes a source code clustering algorithm using a probability model on extreme value distribution. First, we propose an asymmetric distance measure pdist($P_a$, $P_b$) to measure the similarity of $P_a$ and $P_b$ Then, we construct the Plagiarism Direction Graph (PDG) for a given program set using pdist($P_a$, $P_b$) as edge weights. And, we transform the PDG into a Gumbel Distance Graph (GDG) model, since we found that the pdist($P_a$, $P_b$) score distribution is similar to a well-known Gumbel distribution. Second, we newly define pseudo-plagiarism which is a sort of virtual plagiarism forced by a very strong functional requirement in the specification. We conducted experiments with 18 groups of programs (more than 700 source codes) collected from the ICPC (International Collegiate Programming Contest) and KOI (Korean Olympiad for Informatics) programming contests. The experiments showed that most plagiarized codes could be detected with high sensitivity and that our algorithm successfully separated real plagiarism from pseudo plagiarism.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.881-891
• /
• 2020

Recently, the Ministry of Land, Infrastructure and Transport and the Ministry of Science and ICT are developing the Land Observation Satellite (CAS-500) to meet increased demand for high-resolution satellite images. Expected image products of CAS-500 includes precision orthoimage, Digital Surface Model (DSM), change detection map, etc. The quality of these products is determined based on the geometric accuracy of satellite images. Therefore, it is important to make precision geometric corrections of CAS-500 images to produce high-quality products. Geometric correction requires the Ground Control Point (GCP), which is usually extracted manually using orthoimages and digital map. This requires a lot of time to acquire GCPs. Therefore, it is necessary to automatically extract GCPs and reduce the time required for GCP extraction and orthoimage generation. To this end, the Precision Image Processing (PIP) System was developed for CAS-500 images to minimize user intervention in GCP extraction. This paper explains the products, processing steps and the function modules and Database of the PIP System. The performance of the System in terms of processing speed, is also presented. It is expected that through the developed System, precise orthoimages can be generated from all CAS-500 images over the Korean peninsula promptly. As future studies, we need to extend the System to handle automated orthoimage generation for overseas regions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.15-21
• /
• 2009

Hearing loss is one of the most common birth defects among infants. Most of hearing-impaired children are not diagnosed until 1 to 3 years of age - which is too late for the critical period (6 month) for normal speech and language development. If a hearing impairment is identified and treated in its early stage, child's speech and language skills could be comparable to his or her normal-hearing peers. For these reasons, hearing screening at birth and throughout childhood is extremely important. ABR (Auditory brain-stem response) is nowadays one of the most reliable diagnostic tools in the early detection of hearing impairment. In this study, we have developed the system that automatically detects if there is hearing impairment or not for infants or children. For future studies, it will be developed as a portable system to be able to take a measurement not only in sound proof room but also in nursery for neonates.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.641-652
• /
• 2001

Most of current internet auction systems are single auction server program that partly automates the function of the conventional auction house. So these systems do not provide sufficient independence, distribution and parallelism between the functions of the conventional auction house. In these suction systems, only some of suction management facilities are automated by the server program, but still users need to execute a repetitive task to monitor the dynamic progress of a certain auction, decide the proper bid price, and submit the bid. Another problem is that they support only the single auctions such as English suction and Dutch auction, but they do not support the double auctions that are superior to the single auction in terms of speed, efficiency, and the fair distribution of profit. In this paper, we present are design and implement of an agent-based continuous double auction system, called CoDABot, in order to overcome the limitations of current auction systems. CoDABot supports the continuous double auction, provides various bidding agents for users to select, and has been implemented with a multi-agent system to realize more independent, and parallel subsystems.

• The Journal of Society for e-Business Studies
• /
• v.25 no.4
• /
• pp.143-154
• /
• 2020

With the increasing trend of making manufacturing system intelligent and autonomous, the introduction of robot-assist automation, like machine tending system for automated operation of CNC machine tools, is being actively carried out at many industrial sites. Most important part of this intelligent system to install machine tending system, is interface programming between the CNC machine tools and the industrial robot. Despite this importance, however, the machine tending system has many setup problems. it is necessary for difficult re-program of both controllers whenever a new CNC machine tool or robot is introduced. And, the helps of external engineers is required even though trivial changes due to the complex structure of the machine tending system. Authors of this paper introduces the integrated system of the interface between heterogeneous CNC machine tools and industrial robots. In addition, the digital twin implemented inside the machine tool controller enable shop-floor operators to change the interface programming easily. To implement this system, an integrated development environment for 1) an intelligent HMI platform that provide standardized interfaces to heterogeneous CNC machine tools and 2) a robot platform developing application software of various robots, was established. For easy un-tact environment, this paper explain the development of 3) a game-engine based web program of controlling and monitoring machine tending system remotely.