• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.523-528
• /
• 2012

이동용 전자기기에 적용 가능한 유연성 전자모듈이 롤투롤 공정에 의해 개발되었다. 개발된 전자 모듈은 최 외곽의 두 폴리이미드 층과 그 사이의 동선과 이방성도전필름과 박막 실리콘 칩과 모듈의 봉지재 역할을 하는 접착재료로 구성된다. 개발된 유연성 전자모듈의 신뢰성을 평가하기 위하여 열충격시험, 고온고습 시험, 오토클레이브 시험을 수행하였다. 시험수행 결과 두 시험에서는 문제가 발생하지 않았으나, 오토클레이브 시험에서는 대부분의 시편 모듈 내에 박리가 발생하였다. 발생한 박리의 고장 메커니즘을 연구하기 위하여 봉지재의 흡습 관련 물성치를 실험적으로 분석하고 오토클레이브 시험조건에서의 모듈 내 습기확산과정을 범용 유한요소 프로그램을 이용하여 분석하였다. 해석결과로부터 오토클레이브 시험조건에서 모듈 내에 발생하는 습기확산과정을 밝혀낼 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.77-80
• /
• 2005

The surface of concrete tiles is weak in moisture that it occurrenced efflorescence, but in the former study we found that it is possible to ensure moisture stability of concrete surface by autoclaving. So this study is to discuss the moisture stability and Physical Properties of high-strength glossy concrete according to time and temperature of autoclave curing. As the results, by increasing time and temperature of autoclave curing, compressive strength and surface hardness increased and glossiness decreased. In the case to 3 hour and $180^{\circ}C$ of autoclave curing, there is not effloescences in mosture stability test.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.644-652
• /
• 2007

Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.368-371
• /
• 2008

An extensometer system to measure strain and displacement of cylindrical fatigue specimen in a autoclave of high temperature and high pressure environment has been developed by KEPRI. The extensometer reads the displacement caused by fatigue loads at the target length of the specimen installed inside the autoclave. The performance of the extensometer were tested at 15MPa, $315^{\circ}C$ of a operating pressurized water reactor. Two LVDT's of magnet type were connected to the extensometer and used for converting the fatigue displacement to electronic signal. The device is being used for developing environmental fatigue curve of CF8M cast austenitic stainless steel (CASS) in the test condition of low cycle and low strain. This paper introduces the background and results of the development.

• 한국치위생학회지
• /
• 제15권4호
• /
• pp.713-718
• /
• 2015

Objectives: The purpose of the study was to investigate the bacterial morphology attached on ultrasonic scaler tips using no cleansing solution, alcohol cotton, liquid chemical disinfecting agent, and autoclave method. Methods: Scaling tip was applied to the mouth and the ultrasonic scaler tips were assigned to four groups. Group 1 was control group with no cleansing solution. Group 2 was treated with alcohol cotton. Group 3 was treated with 2% green Y-Na solution in liquid chemical disinfecting agent, and Group 4 was sterilized by autoclave method. Live bacteria were observed by phase contrast microscopy. The scanning electron microscopy(SEM) revealed the morphological characteristics of scaler surface. The type of attached bacteria were analyzed using SPSS 21.0 program. The data were analyzed by one-way analysis of variance(ANOVA) and Tukey's post-hoc test. Results: The types of sterilization methods had influences on the bacterial viability. The numbers of cocci, bacilli, spiral form bacteria, and filamentous bacteria was observed in $89.00{\pm}3.60%$, $29.67{\pm}3.51%$, $3.33{\pm}0.57%$ and $1.67{\pm}0.57%$ in control group, $31.67{\pm}3.51%$, $63.33{\pm}4.04%$, $2.00{\pm}1.00%$ and $1.67{\pm}0.57%$ in alcohol cotton group, $69.67{\pm}4.50%$, $12.33{\pm}2.51%$, 0% and 0% in liquid chemical disinfecting agent group, and 0.0%, 0.0%, 0.0% and 0.0% in autoclave method group. The clean surface of ultrasonic scaler tip was shown on SEM by autoclave method. Conclusions: The most effective sterilization method of ultrasonic scaler tip was the autoclave method. Autoclave method is the most effective sterilization method and can reduce the cross-infection in the dental clinic.

• 한국주조공학회지
• /
• 제28권4호
• /
• pp.175-178
• /
• 2008

우주선, 항공기, 수송차량 등은 기능은 집적 다양화 그리고 성능의 고도와 됨에 따라 에너지 효율성을 위해 구조부재의 경량화가 중요성은 증가되고 있다. 경량화 구조부재 재료 중에는 알루미늄 합금, 세라믹, 복합재료 등이 개발되어 우주선, 항공기, 수송차량 구조부재에 적용하기 위한 많은 연구가 이루어지고 있다. 이들 중, 20세기 초 알루미늄합금이 초 경량화 구조부재로서 많이 이용되었다. 본 논문에서는 경량화 재료 중 이방성을 가지는 복합재료를 구조부재에 적용하였다. 그러나 구조부재에 적용되기 위한 이방성 복합 재료는 강한 충격 이후 취성의 특징 때문에 하중과 흡수에너지가 급속히 감소하는 단점을 가지고 있다. 그래서 이방성 복합재료의 각 층간을 완전히 접합하여 성질이 매우 우수한 부재를 제작할 수 있는 Autoclave 성형법으로 제작하였다. 이방성 복합재료 중 CFRP를 설계 메커니즘 변수에 따라 Autoclave 성형을 하고 하중과 흡수에너지가 높음 평가하기 위해 굽힘실험을 하였다.

• 대한토목학회논문집
• /
• 제1권1호
• /
• pp.9-19
• /
• 1981

고강도(高强度)콘크리트의 제조방법중(製造方法中) 가장 대표적(代表的)이고 실용적(實用的)인 것으로 고성능감수제(高性能減水劑)와 고온고압양생(高溫高壓養生)에 의(依)한 방법등(方法等)이 있다. 본연구(本硏究)에서는 이와같은 고강도(高强度)콘크리트로 만든 콘크리트 Pile을 원심력성형(遠心力成形)과 손다짐으로 만들어 각각(各各)에 대(對)하여 Autoclave 양생(養生), Steam 양생후(養生後) 수중(水中) 14일(日) 양생(養生) 및 표준수중양생(標準水中養生)하여 동결융해시험(凍結融解試驗)을 하였으며 각종(各種)에 대(對)하여 내구성(耐久性)의 상관적(相關的)인 관계(關係)를 규명하였다. 이들 공시체(供試體)들의 동결융해(凍結融解)에 대(對)한 내구성(耐久性)은 일반적(一般的)으로 적당량(適當量)의 공기량(空氣量)을 함유(含有)하고 있을 때 상기(上記) 여러 가지 양생(養生)에 대(對)하여 비교적(比較的) 충분(充分)한 내구성(耐久性)이 있는 것으로 판명(判明)되었으나 AE제(劑)를 사용(使用)하지 않은 경우에는 Autoclave 양생(養生)한 고강도(高强度)콘크리트는 타양생(他養生)한 고강도(高强度)콘크리트보다 강도면(强度面)에서는 높았으나 동탄성계수(動彈性係數)가 좀 낮았고 시험후(試驗後)의 내구성계수(耐久性係數)도 극(極)히 약(弱)하였다. 그러나 원심력성형(遠心力成形)한 non AE 콘크리트 Pile은 표준양생(標準養生)하였을 때 내구성계수(耐久性係數)가 100 이상(以上)이었으며 중량감소(重量減少)도 없었다는 사실로 미루어 타 공시체보다 내구성(耐久性)이 우수함을 알 수 있었다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권4호
• /
• pp.85-92
• /
• 1996

본 논문에서는 현수애자의 경년변화 분석을 위해 과전파괴 시험과 장기강도 기계적 하중시험을 신품과 사용품에 대하여 비교, 시험하였다. 현수애자의 경년변화에 따라 애자표면 온도가 대기보다 약 2[$^{\circ}C$] 상승에서 약 7~8[$^{\circ}C$] 상승이 발생하였고, 접착제로 사용한 포틀랜드 시멘트의 오토크래브 팽창율도 경년변화 사고가 많은 시료(오토크래브 팽창율의 측정치 :0.37[%]) 가 사고가 적은 시료(오토크래브 팽창율 : 0.1[%])보다 높게 나타났다. 또한, 신품보다 사용품의 품질관리지수 Qs와 인장강도가 현저히 저하됨을 알 수 있어, 우리나라의 기후조건에 맞도록 경년변화 시험 기준 개정도 요구된다.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.438-442
• /
• 2013

The alternative refrigerant R436B is applied, to assess the application feasibility for a commercial cooling water system. The characteristic stability was verified by Sealed glass tube test and Autoclave test. R436B is chemically stable with the compressor material. The Oil miscibility test shows the usual compressor oil mixed well with R436B. Through the life acceleration test, the cooling performance is maintained. Though slight changes in oil and capillary tube diameter were found, they were within the permitted range. R436B should be applied to commercial cooling water systems as a simple replacement for the usual refrigerant.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.177-185
• /
• 2008

Low-cycle environmental fatigue tests of cast austenitic stainless steel CF8M at the condition of fatigue strain rate 0.04%/sec were conducted at the pressure and temperature, 15MPa, $315^{\circ}C$ of a operating pressurized water reactor (PWR). The used test rig was limited to install an extensometer at the gauge length of the cylindrical fatigue specimen inside a small autoclave. So the magnet type LVDT#s were used to measure the fatigue displacement at the specimen shoulders inside the high temperature and high pressure water autoclave. However, the displacement and strain measured at the specimen shoulders is different from the one at the gauge length for the geometry and the cyclic strain hardening effect. Displacement of the fatigue specimen gauge length calculated by FEM (finite element method) used to modify the measured displacement and fatigue life at the shoulders. A series of low cycle fatigue life tests in air and PWR conditions simulating the cyclic strain hardening effect verified that the FEM modified fatigue life was well agreed with the simulating test results. The process and method developed in this study for the environmental fatigue test inside the small sized autoclave would be so useful to produce reliable environmental fatigue curves of CF8M stainless steel in pressurized water reactors.