• 방송공학회논문지
• /
• 제27권7호
• /
• pp.974-984
• /
• 2022

In this paper, we introduce the minimum and maximum distance setting methods used in geometric distance attenuation processing, which is one of spatial sound reproduction methods. In general, sound attenuation by distance is inversely proportional to distance, that is 1/r law, but when the relative distance between the user and the audio object is very short or long, exceptional processing might be performed by setting the minimum distance or the maximum distance. While MPEG-I Immersive Audio's RM0 uses fixed values for the minimum and maximum distances, this study proposes effective methods for setting the distances considering the signal gain of an audio object. Proposed methods were verified through simulation of the proposed methods and experiments using RM0 renderer.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.6-12
• /
• 2008

The dispersion and attenuation of Lamb and Leaky Lamb waves propagating in a 1 mm-thick steel plate were investigated. For acquiring a long(or large) range inspection capability, the fundamental symmetric and anti-symmetric wave modes(S0 and A0) over law frequencies were studied. Based on the dispersion curves, as well as pitch-catch and multi-mode simulations, it was shown that the S0 mode over law frequencies is the proper mode to minimize the dispersion and attenuation. In addition, it was shown that the S0 mode couldbe easily distinguished under multi-mode simulation since it has a larger group velocity than the A0 mode.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.229-234
• /
• 2001

A practical and effective semi-active on-off control law is developed for vibration attenuation of a natural, multi-degree-of-freedom suspension system, when its operational response mode is available. It does not need the accurate system parameters and dynamics of semi-active actuator. It reduces the total vibratory energy of the system including the work done by external disturbances and the maximum energy dissipation direction of the semi-active control device is tuned to the operational response mode of the structure. The effectiveness of the control law is illustrated with a three degree-of-freedom excavator cabin model.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4093-4097
• /
• 2021

This study presents a new dead-time measurement method using the gamma attenuation law and generalized dead-time models for nuclear gamma-ray detectors. The dead-time of the NaI(Tl) detection system was obtained to validate the new dead-time determination method using very thin lead and polyethylene absorbers. Non-paralyzing dead-time was found to be 8.39 ㎲, and paralyzing dead-time was found to be 8.35 ㎲ using lead absorber for NaI(Tl) scintillator detection system. These dead-time values are consistent with the previously reported dead-time values for scintillator detection systems. The gamma build-up factor's contribution to the dead-time was neglected because a very thin material was used.

• 한국추진공학회지
• /
• 제13권4호
• /
• pp.36-44
• /
• 2009

광학 선형 패터네이터 및 광학 토모그래피 기법을 사용하여 높은 주위 기체 압력 조건에서 분무단면을 측정하였다. 레이저 직선광이 분무 영역을 지나도록 하여 발생하는 Mie 산란 신호 및 직선광의 투과율을 측정하였으며, 이로부터 Beer-Lambert 법칙 및 수학적 단면 재구성 기법을 이용하여 분무 단면의 감쇠 계수 분포를 재구성하였다. 높은 주위 기체 압력 조건에서 광학적으로 밀한 분무가 발생하며, 그 결과 산란 신호의 감쇠 효과가 크게 증가한다. 따라서 미 산란 신호를 이용하는 광학 선형 패터네이터의 경우 감쇠 효과를 완화하는 데 한계를 보인다. 광학 토모그래피의 경우 분무를 통과하는 레이저광의 투과율 정보만을 이용하여 성공적으로 분무 단면을 재구성하였다.

• 한국통신학회논문지
• /
• 제36권4B호
• /
• pp.422-428
• /
• 2011

본 논문에서는 n개의 균등하게 위치한 센서 노드를 가지는 수중 애드 혹 음향 네트워크에서의 시스템 및 채널 모델링, 그리고 이를 바탕으로 유도한 용량 스케일링 법칙을 소개한다. 특히 협 대역 모델에서 캐리어 주파수가 n의 함수로 스케일 되는 것을 허용하는 상황을 가정한다. 가정하는 네트워크에서, 전송 거리 뿐 아니라 주파수 스케일링에도 의존하는 감쇠 변수의 특성을 분석한다. 이를 바탕으로 단일 노드 밀도를 가지는 확장 네트워크 하에서 용량 스케일링에 대한 cut-set 기반 상향 경계선을 유도한다. 상향 경계선은 감쇠 변수에 역으로 비례한다는 결과물로부터, 전 영역에 대해 전력 제한된 네트워크가 생성됨을 보인다. 뿐만 아니라 간단한 최 근거리 다중 홉 전송에 기반 하여 용량 달성 가능한 기술을 소개한다. 확장 네트워크에서 다중 홉 기술은 감쇠 변수의 함수로 표현되는 모든 동작 영역에서 order 측면 최적임을 보인다.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.771-776
• /
• 2012

A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.3-8
• /
• 1996

The bubble size distribution is critical information to understand sound propagation and ambient noise in the ocean. To estimate the bubble size distribution in a bubbly water, the sound attenuation has been only in the conventional acoustic bubble sizing method without considering the sound speed variation. However, the effect of the sound speed variation in bubbly water cannot be neglected because of its compressibility variation. The sound attenuation is also affected by the sound speed variation. In this paper, a coherent acoustic bubble sizing inverse technique is introduced as a new bubble sizing technique with considering sound speed variation as well as the sound attenuation. This coherent sizing method is theoretically verified with the bubble distribution functions of single-size, Gaussian, and power-law functions. Its numerical test results with the coherent acoustic bubble sizing method show good agreement with the given bubble distributions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.507-507
• /
• 2000

In this paper, a kind of limit cycle of an inverted pendulum system is discussed. We propose a stabilization control law for such a limit cycle of an inverted pendulum system that the pendulum rotates periodically. Besides, the stabilization control law is extended so as to ensure not only stability of the limit cycle but also an L$_2$-gain disturbance attenuation in the presence of modeling error and viscosity friction.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.813-821
• /
• 2000

위성통신 경로의 강우감쇠량을 예측하기 위하여 국제적으로 여러 가지 예측모델들이 개발 운용되고 있다. 이러한 예측 모델들은 대부분 미국과 유럽을 비롯한 위성 선진국에서 개발한 것으로 국내의 강우환경을 고려하여 개발된 모델은 없는 실정이다. 본 논문에서는 한국전자통신연구원에서 측정한 강우환경 및 강우감쇠 데이터를 이용하여, 국내 위성통신망에서 고려할 수 있는 강우감쇠량 예측 방법에 대해 기술하였다. 특히, 기존 예측 모델들이 적용한 강우경로의 수평적 변화를 고려한 유효경로 길이 예측 기법에서 탈피하여, 위성통신망에서 필연적으로 고려하여야 할 강우경로의 수직적 변화까지도 고려한 유효경로 예측기법을 유도하고 이를 제안하였다. 본 논문에서 제안한 예측 기법은 국내 강우환경에 적합한 예측 기법으로써, 향후 설계 및 운용될 10GHz 이상의 국내 위성 및 무선통신시스템에 매우 효율적으로 활용할 수 있을 것이다. ^u The engineering of satellite communication systems at frequencies above 10GHz requires a method for estimating rain-caused outage probabilities on the earth-satellite path. A procedure for predicting a rain attenuation distribution from a point rainfall rate distribution is, therefore, needed. In order to predict rain attenuation on the satellite link, several prediction models such as ITU-R, Global, SAM, DAH model, have been developed and used at a particular propagation condition, they may not be appropriate to a propagation condition in Korean territory. In this paper, a new rain attenuation prediction method appropriate to a propagation condition in Korea is introduced. Based on the results from ETRI measurements, a new method has been derived for an empirical approach with an identification on the horizontal correction factor as in current ITU-R method, and the vertical correction factor has been suggested with decreasing power law as a function of rainfall rate. This proposed model uses the entire rainfall rate distribution as input to the model, while the ITU-R and DAH model approaches only use a single 0.01% annual rainfall rate and assume that the attenuation at other probability levels can be determined from that single point distribution. This new model was compared with several world-wide prediction models. Based on the analysis, we can easilty know the importance of the model choice to predict rain attenuation for a particular location in the radio communication system design.