• Title/Summary/Keyword: Attaching

Search Result 938, Processing Time 0.026 seconds

Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique (영상처리기법을 이용한 다중 변위응답 측정 알고리즘의 검증)

  • Kim, Sung-Wan;Kim, Nam-Sik
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.3A
    • /
    • pp.297-307
    • /
    • 2010
  • Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

Effect of Human Implantable Medical Devices on Dose and Image Quality during Chest Radiography using Automatic Exposure Control (자동노출제어를 적용한 흉부 방사선 검사 시 인체 이식형 의료기기가 선량과 화질에 미치는 영향)

  • Kang-Min Lee
    • Journal of the Korean Society of Radiology
    • /
    • v.18 no.3
    • /
    • pp.257-265
    • /
    • 2024
  • In this study, we applied AEC(Auto Exposure Control), which is used in many chest examinations, to evaluate whether medical devices inserted into the body affect the dose and image quality of chest images. After attaching three HIMD(Human implantable medical devices) to the ion chamber, the Monte Carlo methodology-based program PCXMC(PC Program for X-ray Monte Carlo) 2.0 was applied to measure the effective dose by inputting the DAP(Dose Ares Product) value derived from the Pacemaker and CRT and Chemoport Additionally, to evaluate image quality, we set three regions of interest and one noise region on the chest and measured SNR and CNR. The final study results showed significant differences in DAP and Effective dose. There was a significant difference between Pacemaker and CRT when AEC was applied and not applied. (p<0.05) When applied, the dose increased by 37% for Pacemaekr and 52% for CRT. Chemoport showed a 10% increase in effective dose depending on whether AEC was applied, but there was no significant difference. (p>0.05) In the image quality evaluation, there was no significant difference in image quality between all HIMD insertions and AEC applied or not. (p>0.05) Therefore, when the HIMD was inserted into the chest during a chest x ray and overlapped with the ion chamber sensor, the effective dose increased, and there was no difference in image quality even at a low dose without AEC. Therefore, when performing a chest X-ray examination of a patient with a HIMD inserted, it is considered that performing the examination without applying AEC is a method that can be considered to reduce the patient's radiation exposure.

Development for Fishing Gear and Method of the Non-Float Midwater Pair Trawl Net (III) - Opening Efficiency of the Model Net attaching the Kite - (무부자 쌍끌이 중층망 어구어법의 개발 (III) - 카이트를 부착한 모형어구의 전개성능 -)

  • 유제범;이주희;이춘우;권병국;김정문
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.39 no.3
    • /
    • pp.197-210
    • /
    • 2003
  • The non-float midwater pair trawl was effective in the mouth opening and control of the working depth in midwater and bottom. In contrast, we confirmed that it was difficult to keep the net at surface above 30 m of the depth by means of the full scale experiment in the field and the model test in the circulation water channel. To solve this problem, the kites were attached to the head rope of the non-float midwater pair trawl. In this study, four kinds of the model experiments were carried out with the purpose of applying the kite to the korean midwater pair trawl. The results obtained can be summarized as follows: 1. The working depth of the non-float midwater pair trawl with the kite was shallower than that of the proto type and non-float type. The working depth of the kite type was approximately 20m with 2 kites and about 5m with 4 kites under 4.0 knot. The working depth was almost constant but the depth of the head rope sank approximately 15m and 10m according to the increase in the front weight and the wing-end weight, respectively. The changing aspect of the working depth was constant, but the depth of the head rope sank approximately 22m according to the increase in the lower warp length (dL). 2. The hydrodynamic resistance of the kite type was almost increased in a linear form in accordance with the flow speed increase from 2.0 to 5.0 knot. The increasing grate of the hydrodynamic resistance tended to increase in accordance with the increase in flow speed. The hydrodynamic resistance of the kite type was larger approximately 5~10 ton larger than that of the non-float type and the proto type. The hydrodynamic resistance of the kite type increased approximately 3ton with the changing of the front weight from 1.40 to 3.50 ton and approximately 4 ton with the changing of the wing-end weight from 0 to 1.11 ton and approximately 5.5 ton with the changing lower warp length (dL) from 0 to 40 m, respectively. 3. The net height of the kite type was increased approximately 10 m with the change in the kite area from $2,270mm^2$ to 4,540 $\textrm{mm}^2$. The net height of the kite type was aproximately 50 m and 30 m larger than that of the proto type and the non-float type, respectively. The changed aspect of the net width was approximately 5m with the variation of the flow speed from 2.0 to 5.0 knot. 4. The filtering volume of the kite type was larger than that of the proto type and the non-float type by 28%, 34% at 2.0 knot of the flow speed and 42%, 41% at 3.0 knot, and 62%, 45% at 4.0 knot, and 74%, 54% at 5.0knot, respectively. The optimal towing speed was approximately 3.0 knot for the proto type and was over 4.0 knot for the non-float type, and the optimal towing speed reached 5.0 knot for the kite type. 5. The opening efficiency of the kite type was approximately 50% and 25% larger than that of the proto type and the non-float type, respectively.

A STUDY ON THE TEMPERATURE CHANGES OF BONE TISSUES DURING IMPLANT SITE PREPARATION (임플랜트 식립부위 형성시 골조직의 온도변화에 관한 연구)

  • Kim Pyung-Il;Kim Yung-Soo;Jang Kyung-Soo;Kim Chang-Whe
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.40 no.1
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

NFC-based Smartwork Service Model Design (NFC 기반의 스마트워크 서비스 모델 설계)

  • Park, Arum;Kang, Min Su;Jun, Jungho;Lee, Kyoung Jun
    • Journal of Intelligence and Information Systems
    • /
    • v.19 no.2
    • /
    • pp.157-175
    • /
    • 2013
  • Since Korean government announced 'Smartwork promotion strategy' in 2010, Korean firms and government organizations have started to adopt smartwork. However, the smartwork has been implemented only in a few of large enterprises and government organizations rather than SMEs (small and medium enterprises). In USA, both Yahoo! and Best Buy have stopped their flexible work because of its reported low productivity and job loafing problems. In addition, according to the literature on smartwork, we could draw obstacles of smartwork adoption and categorize them into the three types: institutional, organizational, and technological. The first category of smartwork adoption obstacles, institutional, include the difficulties of smartwork performance evaluation metrics, the lack of readiness of organizational processes, limitation of smartwork types and models, lack of employee participation in smartwork adoption procedure, high cost of building smartwork system, and insufficiency of government support. The second category, organizational, includes limitation of the organization hierarchy, wrong perception of employees and employers, a difficulty in close collaboration, low productivity with remote coworkers, insufficient understanding on remote working, and lack of training about smartwork. The third category, technological, obstacles include security concern of mobile work, lack of specialized solution, and lack of adoption and operation know-how. To overcome the current problems of smartwork in reality and the reported obstacles in literature, we suggest a novel smartwork service model based on NFC(Near Field Communication). This paper suggests NFC-based Smartwork Service Model composed of NFC-based Smartworker networking service and NFC-based Smartwork space management service. NFC-based smartworker networking service is comprised of NFC-based communication/SNS service and NFC-based recruiting/job seeking service. NFC-based communication/SNS Service Model supplements the key shortcomings that existing smartwork service model has. By connecting to existing legacy system of a company through NFC tags and systems, the low productivity and the difficulty of collaboration and attendance management can be overcome since managers can get work processing information, work time information and work space information of employees and employees can do real-time communication with coworkers and get location information of coworkers. Shortly, this service model has features such as affordable system cost, provision of location-based information, and possibility of knowledge accumulation. NFC-based recruiting/job-seeking service provides new value by linking NFC tag service and sharing economy sites. This service model has features such as easiness of service attachment and removal, efficient space-based work provision, easy search of location-based recruiting/job-seeking information, and system flexibility. This service model combines advantages of sharing economy sites with the advantages of NFC. By cooperation with sharing economy sites, the model can provide recruiters with human resource who finds not only long-term works but also short-term works. Additionally, SMEs (Small Medium-sized Enterprises) can easily find job seeker by attaching NFC tags to any spaces at which human resource with qualification may be located. In short, this service model helps efficient human resource distribution by providing location of job hunters and job applicants. NFC-based smartwork space management service can promote smartwork by linking NFC tags attached to the work space and existing smartwork system. This service has features such as low cost, provision of indoor and outdoor location information, and customized service. In particular, this model can help small company adopt smartwork system because it is light-weight system and cost-effective compared to existing smartwork system. This paper proposes the scenarios of the service models, the roles and incentives of the participants, and the comparative analysis. The superiority of NFC-based smartwork service model is shown by comparing and analyzing the new service models and the existing service models. The service model can expand scope of enterprises and organizations that adopt smartwork and expand the scope of employees that take advantages of smartwork.

Variation of Genus Ilex in Korea and their Ornamental Values (Ilex속(屬) 수목(樹木)의 유전변이(遺傳變異)의 분석(分析)과 조경학적(造景學的) 이용가치(利用價値)의 조사(調査) 연구(硏究))

  • Yim, Kyong Bin
    • Journal of Korean Society of Forest Science
    • /
    • v.42 no.1
    • /
    • pp.1-38
    • /
    • 1979
  • The woody species of Genus Ilex which are endemic to Korea are distributed on limited area due to solely temperature factor. There is some differences according to species, however in general, the evergreen Ilex are found along southern coastal area of Korean Peninsula and near islands where the cold index does not exceed $-5^{\circ}C$. But Ilex macropoda and the variety, only deciduous ones, are grown in temperate zone of the peninsula and some islands. The list of Ilex species of Korea are as follows. Ilex cornuta Lindley et Pax., I. crenata Thunb. var. microphylla Max., I. crenata Thunb., I. rotunda Thunb., I. macropoda Miq., I. macropoda Miq. var. pseudo-macropoda Loensner, I. integra Thunb. The author surveyed the populations of Ilex species as many as possible and data of some characters such as leaf shape, spine, fruit shape, stomata density, sex ratio in natural communities, etc. are collected. Almost all the Ilex species in Korea show sporadic distribution. This means quite small sized populations isolate distantly each other eliminating the change of gene exchange in between. Particularly Ilex conuta and I. crenata show the morphological differentiation among populations as well as significant individual variation within a population. These were true with such characteristics, leaf shape, leaf dimension, leaf margin, fruit shape, spine, and stomata density. The founded are that the fruit length and the stomata density counted on the beneath surface of leaves of Ilex cornuta increased with the decrease of latitude. These are naturally closely related with the cold index values. The table shown below indicates the correlation between mean stomata density per $0.3642mm^2$ and cold index values. These relation however were not observed on Ilex crenata. The most dominated natured in relation to individual variation were outline of leaf, the number of marginal spine, the shape of leaf cross section and the degree of luster of the upper leaf surface. As shown in photos 5~7, these variations are agreed at a glance. There are reports that the development of marginal spines in some Ilex species is associated with the juvenility and topophysis. In present study, these two factors were neglected because of the intended sampling procedure. Of Ilex rotunda, population difference with the characteristics of leaf length is recognized but not for leaf width, petiole length, and fruit size. However, individual variations within a population were significantly large. In case of Ilex integra, only individual differences within population were calculated statistically for such characteristics as leaf length, leaf width, and petiole length. As to natural population, the sex ratio was 1:2 (female to male) for Ilex cornuta, and 1:1 for Ilex crenata. The tendency of more male than female in I. cornuta was agreed to other observations. Preparing the tip cutting of length 10cm, and treating with IBA, then attaching earth ball to the cut end, very successful rooting percentages were obtained. Asexual propagation has the advantages of maintaining the heterozygosity of existing varieties and overcoming the difficulties of delayed seed germination frequently encountered with Ilex species. Considering a great deal of variation in morphological traits, a good possibility of selection breeding for decorative and ornamental purposes exists. At present, these evergreen Ilex are ignored by local people as nuisance weedy shrubs. So the proper protection measures should promptly be taken.

  • PDF

A Study on the Excavated Sab(a funeral fan) from Lime-filled Tomb and Lime-layered Tomb during the Joseon Dynasty (조선시대 회격·회곽묘 출토 삽(翣)에 대한 고찰)

  • Yi, Seung Hae;An, Bo Yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.2
    • /
    • pp.43-59
    • /
    • 2008
  • Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.

A Study on the Forest Land System in the YI Dynasty (이조시대(李朝時代)의 임지제도(林地制度)에 관(關)한 연구(硏究))

  • Lee, Mahn Woo
    • Journal of Korean Society of Forest Science
    • /
    • v.22 no.1
    • /
    • pp.19-48
    • /
    • 1974
  • Land was originally communized by a community in the primitive society of Korea, and in the age of the ancient society SAM KUK-SILLA, KOKURYOE and PAEK JE-it was distributed under the principle of land-nationalization. But by the occupation of the lands which were permitted to transmit from generation to generation as Royal Grant Lands and newly cleared lands, the private occupation had already begun to be formed. Thus the private ownership of land originated by chiefs of the tribes had a trend to be gradually pervaded to the communal members. After the, SILLA Kingdom unified SAM KUK in 668 A.D., JEONG JEON System and KWAN RYO JEON System, which were the distribution systems of farmlands originated from the TANG Dynasty in China, were enforced to established the basis of an absolute monarchy. Even in this age the forest area was jointly controlled and commonly used by village communities because of the abundance of area and stocked volume, and the private ownership of the forest land was prohibited by law under the influence of the TANG Dynasty system. Toward the end of the SILLA Dynasty, however, as its centralism become weak, the tendency of the private occupancy of farmland by influential persons was expanded, and at the same time the occupancy of the forest land by the aristocrats and Buddhist temples began to come out. In the ensuing KORYO Dynasty (519 to 1391 A.D.) JEON SI KWA System under the principle of land-nationalization was strengthened and the privilege of tax collection was transferred to the bureaucrats and the aristocrats as a means of material compensation for them. Taking this opportunity the influential persons began to expand their lands for the tax collection on a large scale. Therefore, about in the middle of 11th century the farmlands and the forest lands were annexed not only around the vicinity of the capital but also in the border area by influential persons. Toward the end of the KORYO Dynasty the royal families, the bureaucrats and the local lords all possessed manors and occupied the forest lands on a large scale as a part of their farmlands. In the KORYO Dynasty, where national economic foundation was based upon the lands, the disorder of the land system threatened the fall of the Dynasty and so the land reform carried out by General YI SEONG-GYE had led to the creation of ensuing YI Dynasty. All systems of the YI Dynasty were substantially adopted from those of the KORYO Dynasty and thereby KWA JEON System was enforced under the principle of land-nationalization, while the occupancy or the forest land was strictly prohibited, except the national or royal uses, by the forbidden item in KYEONG JE YUK JEON SOK JEON, one of codes provided by the successive kings in the YI Dynasty. Thus the basis of the forest land system through the YI Dynasty had been established, while the private forest area possessed by influential persons since the previous KORYO Dynasty was preserved continuously under the influence of their authorities. Therefore, this principle of the prohibition was nothing but a legal fiction for the security of sovereign powers. Consequently the private occupancy of the forest area was gradually enlarged and finally toward the end of YI Dynasty the privately possessed forest lands were to be officially authorized. The forest administration systems in the YI Dynasty are summarized as follows: a) KEUM SAN and BONG SAN. Under the principle of land-nationalization by a powerful centralism KWA JEON System was established at the beginning of the YI Dynasty and its government expropriated all the forests and prohibited strictly the private occupation. In order to maintain the dignity of the royal capital, the forests surounding capital areas were instituted as KEUM SAN (the reserved forests) and the well-stocked natural forest lands were chosen throughout the nation by the government as BONG SAN(national forests for timber production), where the government nominated SAN JIK(forest rangers) and gave them duties to protect and afforest the forests. This forest reservation system exacted statute labors from the people of mountainious districts and yet their commons of the forest were restricted rigidly. This consequently aroused their strong aversion against such forest reservation, therefore those forest lands were radically spoiled by them. To settle this difficult problem successive kings emphasized the preservation of the forests repeatedly, and in KYEONG KUK DAI JOEN, the written constitution of the YI Dynasty, a regulation for the forest preservation was provided but the desired results could not be obtained. Subsequently the split of bureaucrats with incessant feuds among politicians and scholars weakened the centralism and moreover, the foreign invasions since 1592 made the national land devasted and the rural communities impoverished. It happned that many wandering peasants from rural areas moved into the deep forest lands, where they cultivated burnt fields recklessly in the reserved forest resulting in the severe damage of the national forests. And it was inevitable for the government to increase the number of BONG SAN in order to solve the problem of the timber shortage. The increase of its number accelerated illegal and reckless cutting inevitably by the people living mountainuos districts and so the government issued excessive laws and ordinances to reserve the forests. In the middle of the 18th century the severe feuds among the politicians being brought under control, the excessive laws and ordinances were put in good order and the political situation became temporarily stabilized. But in spite of those endeavors evil habitudes of forest devastation, which had been inveterate since the KORYO Dynasty, continued to become greater in degree. After the conclusion of "the Treaty of KANG WHA with Japan" in 1876 western administration system began to be adopted, and thereafter through the promulgation of the Forest Law in 1908 the Imperial Forests were separated from the National Forests and the modern forest ownership system was fixed. b) KANG MU JANG. After the reorganization of the military system, attaching importance to the Royal Guard Corps, the founder of the YI Dynasty, TAI JO (1392 to 1398 A.D.) instituted the royal preserves-KANG MU JANG-to attain the purposes for military training and royal hunting, prohibiting strictly private hunting, felling and clearing by the rural inhabitants. Moreover, the tyrant, YEON SAN (1495 to 1506 A.D.), expanded widely the preserves at random and strengthened its prohibition, so KANG MU JANG had become the focus of the public antipathy. Since the invasion of Japanese in 1592, however, the innovation of military training methods had to be made because of the changes of arms and tactics, and the royal preserves were laid aside consequently and finally they had become the private forests of influential persons since 17th century. c) Forests for official use. All the forests for official use occupied by government officies since the KORYO Dynasty were expropriated by the YI Dynasty in 1392, and afterwards the forests were allotted on a fixed standard area to the government officies in need of firewoods, and as the forest resources became exhausted due to the depredated forest yield, each office gradually enlarged the allotted area. In the 17th century the national land had been almost devastated by the Japanese invasion and therefore each office was in the difficulty with severe deficit in revenue, thereafter waste lands and forest lands were allotted to government offices inorder to promote the land clearing and the increase in the collections of taxes. And an abuse of wide occupation of the forests by them was derived and there appeared a cause of disorder in the forest land system. So a provision prohibiting to allot the forests newly official use was enacted in 1672, nevertheless the government offices were trying to enlarge their occupied area by encroaching the boundary and this abuse continued up to the end of the YI Dynasty. d) Private forests. The government, at the bigninning of the YI Dynasty, expropriated the forests all over the country under the principle of prohibition of private occupancy of forest lands except for the national uses, while it could not expropriate completely all of the forest lands privately occupied and inherited successively by bureaucrats, and even local governors could not control them because of their strong influences. Accordingly the King, TAI JONG (1401 to 1418 A.D.), legislated the prohibition of private forest occupancy in his code, KYEONG JE YUK JEON (1413), and furthermore he repeatedly emphasized to observe the law. But The private occupancy of forest lands was not yet ceased up at the age of the King, SE JO (1455 to 1468 A.D.), so he prescribed the provision in KYEONG KUK DAI JEON (1474), an immutable law as a written constitution in the YI Dynasty: "Anyone who privately occupy the forest land shall be inflicted 80 floggings" and he prohibited the private possession of forest area even by princes and princesses. But, it seemed to be almost impossible for only one provsion in a code to obstruct the historical growing tendecy of private forest occupancy, for example, the King, SEONG JONG (1470 to 1494 A.D.), himself granted the forests to his royal families in defiance of the prohibition and thereafter such precedents were successively expanded, and besides, taking advantage of these facts, the influential persons openly acquired their private forest lands. After tyrannical rule of the King, YEON SAN (1945 to 1506 A.D.), the political disorder due to the splits to bureaucrats with successional feuds and the usurpations of thrones accelerated the private forest occupancy in all parts of the country, thus the forbidden clause on the private forest occupancy in the law had become merely a legal fiction since the establishment of the Dynasty. As above mentioned, after the invasion of Japanese in 1592, the courts of princes (KUNG BANGG) fell into the financial difficulties, and successive kings transferred the right of tax collection from fisherys and saltfarms to each KUNG BANG and at the same time they allotted the forest areas in attempt to promote the clearing. Availing themselves of this opportunity, royal families and bureaucrats intended to occupy the forests on large scale. Besides a privilege of free selection of grave yard, which had been conventionalized from the era of the KORYO Dynasty, created an abuse of occuping too wide area for grave yards in any forest at their random, so the King, TAI JONG, restricted the area of grave yard and homestead of each family. Under the policy of suppresion of Buddhism in the YI Dynasty a privilege of taxexemption for Buddhist temples was deprived and temple forests had to follow the same course as private forests did. In the middle of 18th century the King, YEONG JO (1725 to 1776 A.D.), took an impartial policy for political parties and promoted the spirit of observing laws by putting royal orders and regulations in good order excessively issued before, thus the confused political situation was saved, meanwhile the government officially permittd the private forest ownership which substantially had already been permitted tacitly and at the same time the private afforestation areas around the grave yards was authorized as private forests at least within YONG HO (a boundary of grave yard). Consequently by the enforcement of above mentioned policies the forbidden clause of private forest ownership which had been a basic principle of forest system in the YI Dynasty entireely remained as only a historical document. Under the rule of the King, SUN JO (1801 to 1834 A.D.), the political situation again got into confusion and as the result of the exploitation from farmers by bureaucrats, the extremely impoverished rural communities created successively wandering peasants who cleared burnt fields and deforested recklessly. In this way the devastation of forests come to the peak regardless of being private forests or national forests, moreover, the influential persons extorted private forests or reserved forests and their expansion of grave yards became also excessive. In 1894 a regulation was issued that the extorted private forests shall be returned to the initial propriators and besides taking wide area of the grave yards was prohibited. And after a reform of the administrative structure following western style, a modern forest possession system was prepared in 1908 by the forest law including a regulation of the return system of forest land ownership. At this point a forbidden clause of private occupancy of forest land got abolished which had been kept even in fictitious state since the foundation of the YI Dynasty. e) Common forests. As above mentioned, the forest system in the YI Dynasty was on the ground of public ownership principle but there was a high restriction to the forest profits of farmers according to the progressive private possession of forest area. And the farmers realized the necessity of possessing common forest. They organized village associations, SONGE or KEUM SONGE, to take the ownerless forests remained around the village as the common forest in opposition to influential persons and on the other hand, they prepared the self-punishment system for the common management of their forests. They made a contribution to the forest protection by preserving the common forests in the late YI Dynasty. It is generally known that the absolute monarchy expr opriates the widespread common forests all over the country in the process of chainging from thefeudal society to the capitalistic one. At this turning point in Korea, Japanese colonialists made public that the ratio of national and private forest lands was 8 to 2 in the late YI Dynasty, but this was merely a distorted statistics with the intention of rationalizing of their dispossession of forests from Korean owners, and they took advantage of dead forbidden clause on the private occupancy of forests for their colonization. They were pretending as if all forests had been in ownerless state, but, in truth, almost all the forest lands in the late YI Dynasty except national forests were in the state of private ownership or private occupancy regardless of their lawfulness.

  • PDF