• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.91-98
• /
• 2009

A reliable tensile test technique for PDP's barrier rib materials was introduced. A tensile specimen was prepared by punching out of green sheet, curing the specimen in a high temperature furnace, attaching sand paper tabs on each grip ends, and then attaching two strain gages for the strain monitoring and specimen alignment. Preliminary tensile tests were successfully done with the specimens made from ZnO-based lead-free green sheet. The specimens cured at 3 different maximum curing temperatures were tested to demonstrate the applicability of the test method. The Young's modulus was 88 ${\pm}$ 4 GPa regardless of the maximum curing temperature. The ultimate tensile strength was decreased with increasing the temperature. The tensile test method proposed in this study was proven to be reliable, useful and easy to estimate the bulk mechanical properties of barrier rib materials.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.57-62
• /
• 2003

A fundamental structural design consideration for a vehicle system is the overall vibration characteristics in bending and torsion. Vibration characteristics of such vehicle system are mainly influenced by the static and dynamic stiffness of the vehicle body structure and also by the material and physical properties of the components attached to the vehicle body structure. In this paper, modeling techniques for the vehicle components are presented and the flexibility and mass effects of the components for the vibration characteristics of the vehicle are investigated. The $1^{st}$ torsional frequency is increased by attaching windshields to the B.I.W. (body-in-white), but the $1^{st}$ bending frequency is decreased by the mass effect. And also, the natural frequencies of the vehicle are large decreased by attaching bumpers, seats, doors, trunk-lid etc. But, suspension system rarely affects the natural frequencies of the vehicle. The study shows thai the dynamic characteristics of the vehicle system can be effectively predicted in the initial design stage.

• Structural Engineering and Mechanics
• /
• v.16 no.2
• /
• pp.153-176
• /
• 2003

From the equation of motion of a "bare" non-uniform beam (without any concentrated elements), an eigenfunction in term of four unknown integration constants can be obtained. When the last eigenfunction is substituted into the three compatible equations, one force-equilibrium equation, one governing equation for each attaching point of the concentrated element, and the boundary equations for the two ends of the beam, a matrix equation of the form [B]{C} = {0} is obtained. The solution of |B| = 0 (where ${\mid}{\cdot}{\mid}$ denotes a determinant) will give the "exact" natural frequencies of the "constrained" beam (carrying any number of point masses or/and concentrated springs) and the substitution of each corresponding values of {C} into the associated eigenfunction for each attaching point will determine the corresponding mode shapes. Since the order of [B] is 4n + 4, where n is the total number of point masses and concentrated springs, the "explicit" mathematical expression for the existing approach becomes lengthily intractable if n > 2. The "numerical assembly method"(NAM) introduced in this paper aims at improving the last drawback of the existing approach. The "exact"solutions in this paper refer to the numerical results obtained from the "continuum" models for the classical analytical approaches rather than from the "discretized" ones for the conventional finite element methods.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.187-205
• /
• 1999

The purpose of this study is to research into a meaning of Mexican Mural and to clarify on the internal significance of Muralism in the modern fashion. Nuralism is an example of the brith of the great people's art. The mural Fine art in mexico was the peculiar fine art campaign which observed the social function. And the mural of Mexican that the ideology and fine art combined came to occupy the unprecedented important position as a part of popular education which is the product of Mexico revolution. Thus in this study considered that the background of Mexican Mural in 1930's resembled the social and cultural background of the latter half of 20th century. The internal significance of Muralism expressed in the modern fashion was categorized as attaching importance to human the pursuit of the utopia the tendency to nationalism Satriric and moral painting. First Attaching importance to human in the modern fashion expressed the recovery of humanity by meaning in opposition to moral crisis of the human in the pluralistic society. Second The pursuit of the utopia in terms of interest the ideal way in the modern fashion expressed mysterious or hopeful through using religious colors motivies etc. Third The tendency to nationalism in the modern fashion expressed the painting of the masses in forms of mixing aboriginal culture elements and memorial elements. Fourth Satiric and moral painting in the modern fashion expressed wits or humorous style through using geometrical motives and light colors etc, indirectly expressed distress of modern men.

• Journal of KIBIM
• /
• v.7 no.1
• /
• pp.45-53
• /
• 2017

Continuous research efforts have been made on acquiring location data on construction sites. As a result, GPS and RFID are increasingly employed on the site to track the location of equipment and materials. However, these systems are based on radio frequency technologies which require attaching tags on every target entity. Implementing the systems incurs time and costs for attaching/detaching/managing the tags or sensors. For this reason, efforts are currently being made to track construction entities using only cameras. Vision-based 3D tracking has been presented in a previous research work in which the location of construction manpower, vehicle, and materials were successfully tracked. However, the proposed system is still in its infancy and yet to be implemented on practical applications for two reasons. First, it does not involve entity matching across two views, and thus cannot be used for tracking multiple entities, simultaneously. Second, the use of a checker board in the camera calibration process entails a focus-related problem when the baseline is long and the target entities are located far from the cameras. This paper proposes a vision-based method to track multiple workers simultaneously. An entity matching procedure is added to acquire the matching pairs of the same entities across two views which is necessary for tracking multiple entities. Also, the proposed method simplified the calibration process by avoiding the use of a checkerboard, making it more adequate to the realistic deployment on construction sites.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.78-90
• /
• 2017

In this study, brassiere prototype was developed for attaching the measuring module of ECG measurement and body movement while sleeping. For ECG measurement, textile electrodes was made of stretch fabric containing polyurethane in consideration of elasticity of brassiere band. It was used as a conductive yarn by silver coating on the warp. The textile electrodes was woven with twisted twill to increase the density of conductive yarns. The pressure of the brassiere band was enough to sensing stably the ECG, and the elastic band of the brassiere was designed to be wider than 3cm to install the textile electrodes inside, so that textile electrodes was close fitting to the skin at a constant pressure without lifting. The textile electrodes coated with silicon on rear was attached to brassiere elastic band, and the module was installed with a snap connector to textile electrodes of brassiere band. The module was suitable to monitering ECG measurement of a typical R peak, pulse rate and body movement while sleeping without interfering.

• Applied Microscopy
• /
• v.44 no.3
• /
• pp.96-99
• /
• 2014

Study on the egg envelope of an endemic Korean freshwater fish, Coreoleuciscus splendidus was carried out by light and scanning electron microscopes during its spawning season. The egg envelope on the entire egg is filled with plenty of long cylinder-like villi before and after fertilization. The fertilized eggs consist of two regions, the attaching and non-attaching parts to stick to the substrates. The villi covering the fertilized eggs have three kinds of villi in its length: 1) normal- sized villi of an average of $10.6{\mu}m$ on the non-attachment part; 2) longer and more slender villi over about $20{\mu}m$ on the attachment part, at least being two times longer than those of the non-attachment; and 3) shorter villi under about $5.0{\mu}m$ around the micropyle, with half the size of the non-attachment villi. The micropyle rotated in a counter-clockwise direction with five pieces of the ridges.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.10 no.1
• /
• pp.139-158
• /
• 1997

A Literature study on the external treatment of nose diseases, the results are as follows; 1. Nose was called "Cheun-bin(天牝)", was outer orifice of the lung, was the gate of vital energe(氣), The main function of nose is divided three pacts. One is the respiration, another is the sense of smell, the other is the sounding consonance. 2. Nose is concerned with The Lung(肺), The Spleen(脾), The Heart(心), The Stomach(胃), The Large intestine(大腸), The Bladder(膀胱) in the organs, is concerned with Lung Meridean, Large intestine Meridean, Stomach Meridean, Heart Meridean, Spleen Meridean, Governor Vessel Meridean etc. 3. The method on the external treatment of nose diseases is classified with obstructive method, pouring method, blowing method, attaching method, plaster method, rubbing method, cleansing method, poulticing method. In frequency of practical use, Obstructive method is used 276 cases, Blowing method is used 123 cases, Attaching method is used 103 cases, Plaster method is used 76 cases. 4. In frequency of the medicinal works on the external treatment of nose diseases, Herba Asari(細辛) is used 134 cases, Pedicellus Melo(瓜 ) is used 85 cases, Radix Aconiti Praeparata(附子) is used 52 cases, Herba Agastachis(麝香) is used 51 cases, Semen Armeniacae Amarurn(杏仁) is used 44 cases etc. In frequency of a prescription on the external treatment of nose diseases, Tongcho-san(通草散) is used 9 cases, $Sesin-go{\cdot}Sinyi-go{\cdot}Changpo-san$ are used 8 cases, $Kwache-san{\cdot}Wungwhang-san$ are used 7 cases etc.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.77-81
• /
• 2003

SDM (Structural Dynamics Modification) is a tool to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary (modifying) structures. In this paper, the goal of the optimal SDM is set to maximize the natural frequency of a base plate structure by attaching serially-connected beam stiffeners. The design variables are chosen as positions of the attaching beam stiffeners, where the number of stiffeners is considered as a design space. The problem of non-matching interface nodes between the base plate and beam stiffeners is solved by using localized Lagrange multipliers, which act to glue the two structures with non-matching interface nodes. As fer the cases of non-matching interface nodes problem, the governing equation of motion of a structure can be considered from the viewpoint of a topological modification, which involves the change of the number of structural members and DOFs. Consequently, the eigenpairs of the beam-stiffened plate structure are obtained by using an eigen reanalysis technique of topological modifications. Evolution Strategies (ES), which is a probabilistic population-based optimization technique that mimics the principles from biological evolution in nature, is utilized as a mean for the optimization.

• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2011

In this paper, we consist of three dimensional acceleration sensor as a small-sized sensor module to acquire base technologies that need to estimate exhibition audience' moving distance. and that we developed algorism and device that can calculate acceleration in gravity direction with attaching it to people's body part without regard to three dimensional direction. By making use of the sensor module, we have to process the data that let it quantitatively process possible to measure people's walk and movement by computer system. We normalized sensor output data in the process of change from sensor module to acquisition of data, rectangular coordinates and single scalar acceleration value in gravity direction. Printed out sensor data attaching sensor module to people's body part is used for motion pattern detection after normalization, Motion sensor devised mode change algorism because it print data of other pattern according to attached position of body. For algorism design, we collected data occurring during walking about subject and we also defined occurring problem domain after analyzing the data. We settle defined problem domain and that we simulated the walking number measuring instrument with highly efficient in restricted environment.