• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.290-298
• /
• 1996

The effects of impression tray disinfection procedures on the bond strength of impression-material adhesive to two of types resin trays were evaluated with a tensile test. Autopolyme-rizing acrylic resin was formed into 1x1x1 cm cubes. A hook was attached to each cube with autopolymerizing acrylic resin. Perforated trays were fabricated with stops to maintain an even 3 cm of impression material over the resin block. Hook on the opposite side of the perforated tray permitted attachment of the metal plate to a mechanical testing machine. Before adhesive was applied, one third of the resin specimens were immersed in a 5% sodium hypochlorite solution : one third in a 2% glutaradehyde solution, and one third were kept in the "as fabricated" condition. Three products(Perfect ups, Exafine, and Exp-ress) of polyvynil siloxane impression material-adhesive system were evaluated. The resin-impression material-metal plate couples were attached to a mechanical testing machine and tensile forces were applied at a separation rate of 10 centimeters per second. The results were as follows; 1. Both disinfectant and adhesive had effects on bond strength values, but adhesive had more effect than disinfectant(p<0.01). However, there was no interaction between dinin-fectant and adhesive(p>0.01). 2. Mean bond strength values for the Perfect materials were about 85% less than that of the Exafine or the Express materials. However, there was no stastically significant difference between the mean bond strength values of the Exafine materials and the Express materials(p>0.05). 3. The use of disinfectants produced significant reduction in bond strength values(p<0.05). But there was no stastically significant difference between the mean bond strength values of the groups treated with disinfectants(p>0.05).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.658-661
• /
• 2008

Vibrations transmitted through rolling tire are major sources of road noise in vehicle interior on the range of $0{\sim}500Hz$. Among various road noises, tire cavity noise makes many problems recently. Vehicle NVH performance has improved better and road surfaces are made well. But tires are changed to high inches and low series. So tire cavity noise becomes more serious. In this paper, a designed material for reducing tire cavity noise is proposed. On the surface inside tire, this material is attached at one position using double-tape. This material disperses the pressure variations inside the tire. So a spindle forces at wheel center are reduced. And tire cavity noise at vehicle interior is also reduced. Durability is verified by tire only test and vehicle test. Noise performance also compared with peak levels after attaching this material.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.69-72
• /
• 2007

In this paper, we describe the analysis of interior noise for tilting train that is being developed in Korea. Tilting train is made of composite material to reduce the car body's weight and attached a self-steering system on bogie to improve curving performance. However, the acoustic performance (Transmission Loss) of such material is worse than the materials of conventional train, such as aluminum, steel and so on. Therefore, we measure the transmission loss of side wall / floor of tiling train and predict the interior noise for tilting train using its measuring results

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.441-441
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1543-1546
• /
• 2013

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.398-407
• /
• 2007

In this paper we proposed the tag antenna with a low performance distortion from an attached surface material using the asymmetric dual-arm dipole antenna(ADDA) structure. The tag is designed to exhibit low performance changes when the tag is attached on a target object(the medical litter receptacle, ${\varepsilon}_r=1.7,\;tan\;{\delta}=0.002$). Detail design parameters for the proposed antenna are optimized to maintain a good readable range in free-space as well as on a target object. The size of the optimized antenna is $100\;mm{\times}50\;mm$. The antenna shows the matching bandwidth($S_{11}$< -10 dB) of 3.7 % and the radiation efficiency of 80 % at the operating frequency. Finally we confirmed the readable range of the tag antenna by measurement and it shows about 5.3 m in free space and 5.5 m on the target object.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1547-1554
• /
• 2015

The potential of microalgae biofuel has not been realized because of the low productivity and high costs associated with the current cultivation systems. In this study, a new low-cost and transparent attachment material was tested for cultivation of a filamentous algal strain, Stigeoclonium sp., isolated from wastewater. Initially, the different materials tested for Stigeoclonium cultivation in untreated wastewater were nylon mesh, polyethylene mesh, polypropylene bundle (PB), polycarbonate plate, and viscose rayon. Among the materials tested, PB led to a firm attachment, high biomass (53.22 g/m², dry cell weight), and total lipid yield (5.8 g/m²) with no perceivable change in FAME profile. The Stigeoclonium-dominated biofilm consisted of bacteria and extracellular polysaccharide, which helped in biofilm formation and for effective wastewater treatment (viz., removal efficiency of total nitrogen and total phosphorus corresponded to ~38% and ~90%, respectively). PB also demonstrated high yields under multilayered cultivation in a single reactor treating wastewater. Hence, this system has several advantages over traditional suspended and attached systems, with possibility of increasing areal productivity three times using Stigeoclonium sp. Therefore, multilayered attached growth algal cultivation systems seem to be the future cultivation model for large-scale biodiesel production and wastewater treatment.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1175-1182
• /
• 2014

In this study, we examined the effect of cathode from electrolysis reactor for treating ballast water. We are going to select a suitable cathode for seawater electrolysis after considering the effect on the generation of the oxidant of cathode and the electrode deposition materials adhering to the surface of cathode. Anode is Ru-Ti-Pd electrode and cathode are Ti, Pt, JP520 (Ni-Pt-Ce) electrodes. Using the cathode of the three types, experiments were conducted to examine the effects of TRO (total residual oxidants) generation concentration and RNO (N, N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation concentration (in 1, 35 psu), ohmic drop, FESEM(field emission scanning electron microscope) observation of cathode surface and EDX (energy dispersive X-ray spectroscopy) measurements of attached fouling material. The results showed that TRO generation concentration and RNO degradation concentration in according to each type of cathode are not different. The attached fouling materials were observed on the surface of Ti and the JP520 electrode by the observation of SEM after electrolysis for two hours, but it was not observed on the surface of Pt electrode. When considering the surface ohmic drop of cathode and the attached fouling materials, Pt electrode was judged as the excellent cathode.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.130-143
• /
• 2020

The development of three-dimensional (3D) printing technology is bringing new innovations to various fields such as health care, architecture, and fashion. 3D printing can be manufactured to suit the size of the consumer's body, modify the design to meet their tastes, and produce small quantities of various products. Therefore, 3D printing in the field of fashion has great potential. The purpose of this study was to investigate various application models of 3D printing for fashion design and analyze their characteristics after developing the fashion garment samples. First, the background of 3D printing was reviewed then, fashion designed by a 3D printing application was analyzed. As a result, four types of 3D printing applications were developed: object-attached, linkage, kinematics, and assembly. The object-attached type was the method of printing 3D material as an object in the intended shape and form and was attached to the garment by sewing. The linkage type referred to printing 3D material in small pieces of certain shapes that could be linked. The kinematics type was structures with hinges that could flex to fit the human body. The assembly type referred to developing 3D materials in female and male pieces such as nuts and bolts. By providing the advantages, disadvantages, trial-and-errors, and challenges of the 3D printing fashion design process, this study contributes to the effective applications and possibilities of future design.