• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.45-56
• /
• 1983

The purpose of this experiment was to evaluate the effect of the drum structures and crop moisture contents on the performance of newly developed throw-in type axial thersher. Sachun No.2 malting barley with four different crop moisture levels was used as the testing material. Four different types of threshing drum; the cylindrical drum-equipped with teeth or rubber bars and the conical drum-equipped with teeth or rubber bars were tested. The results are summarized as follows; 1. The threshing efficiency of cylindrical drum was higher than that of the conical one, and the drum with teeth was more effective in threshing than the one with bars. However, the higher the threshing efficiency over the whole range of moisture levels and drum speeds given, the more the rapid and unexpectable variations in threshing efficiencies 2. The separation efficiency of the conical drum was decreased as drum speed was increased and was not so much influenced as crop moisture content. But in case of the cylindrical drum, the result was shown in opposite way to that of the conical one. The separation efficiency of the drum with teeth was higher than that of the drum with bars and no significant decrease in separating efficiency was found at wet crop condition. 3. Foreign matters other than grain passing through the concave sieve was decreased as crop moisture content was increased, and the purity was increased at middle range of drum speed regardless of drum types. 4. Minimum grain loss was found at 700 rpm to 800 rpm of drum speed for all types of drums. The effect of crop moisture content on total grain loss was varied with drum types. As far as the grain loss is concerned, the conical drum having teeth was not so greatly influenced by various crop moisture contents and drum speeds as compared with the other types of drum. 5. Generally, the crop moisture content has more relevant effect on the germination than the drum speed regardless of drum types. The germination percentage of grain threshed by the conical drum and the bar attached drum were higher than those of cylindrical one and teeth attached one, respectively.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.254-258
• /
• 2006

Zeolites with excellent adsorption capacity of volatile organic compounds were attached onto inorganic fibers which were the raw materials of honeycomb-type adsorbers. The amounts of zeolite particles attached onto the fibers considerably increased by treating them with hydrochloric acid, sulfuric acid, or hydrofluoric acid. Various functional groups such as chloropropyl, aminopropyl and epoxy groups of silane compounds, and amine groups of polyethylenimine were employed as covalent linkage materials between the fibers and zeolite particles. The state of the fibers coated with zeolite particles was examined by scanning electron microscopy, and the amounts of zeolite particles bound to the fibers were estimated from their BET surface areas. The largest amount was obtained when polyethylenimine was employed as a linkage material. Polyethylenimine was the most effective for attaching zeolite particles onto the inorganic fibers among various linkers employed.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.174-179
• /
• 2004

Attenuation of conduction noise through microstrip line attached with the high lossy iron flakes-rubber composites has been investigated in GHz frequencies. Microstrip line was designed with characteristic impedance of 50 $\Omega$ and a length corresponding to the center frequency of 3 GHz. Iron flakes were fabricated by mechanical forging of spherical iron powders using an attrition mill. The fabricated microstrip line shows a ideal propagation characteristics of S$\sub$11/ < -60 dB and S$\sub$21/ = 0 dB. Attaching a noise absorbing sheet on the microstrip line, S$\sub$11/ increases to about -10 dB and S$\sub$21/ decreases to -20～-60 dB depending on the length of absorbing sheet. The calculated power loss is as high as 80% in the frequency range 2～8 GHz. It is suggested that the most critical material parameter is magnetic loss for the enhancement of noise attenuation.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.1-7
• /
• 2011

This paper studied analysis of deflagration rapid propagation of burning through only a few second and fire cause into the Busan indoor shooting range. We carried out combustion experiment of sound-absorbing materials extensively used, to analyze propagation path of burning in indoor shooting range. From the experimental results, general sound-absorbing materials were rapid burned simultaneously with ignition and in case of attached gunpowder residue, they were burning about tripled by comparison with general sound-absorbing materials. The incombustibility sound-absorbing materials had all gone out simultaneously with ignition, but they were burning similar to general type materials in case of attached gunpowder residues. In order to analysis of the cause of fire, we calculated kinetic energy of bounced off bullet, from result, if the bounced off bullet impacted gunpowder residues, the gunpowder residues were possible to ignite by the bullet.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.679-684
• /
• 2017

This paper presents an UHF(Ultra High Frequency) band small cavity structured RFID(Radio Frequency Identification) tag antenna with a long reading range, designed to apply on metal cart or pallet for auto-parts logistics. The size of tag antennas is $140{\times}60{\times}10mm^3$, attached on a exporting metal cart, and it can give the information of inventory and logistics of carts. By collecting the exported carts and increasing the recovery rate of missing carts or pallets, the paid import tax can be refunded when the carts are returned back to the manufacture. The tag antenna was equipped with a cover to prevent damage, and the dielectric constant of the cover is considered for the simulation. The reading range of the tag antenna is 12 m using LP(Linear Polarization), 10 m with CP(Circular Polarization) reader antennas. This 920 MHz UHF RFID cavity tag ensures the long reading distance of the antenna regardless of the material of the object where it is attached.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2009

This study, "The study about performance evaluations of mobile cover for X-ray's diffusion and distribution in mobile radiation" is based on the rules of mobile defense apparatus for radiation producer in 2006. To use the mobile cover for X-ray for diagnosis has been compulsory in common wards except operation rooms, emergency rooms and intensive care units. we have confirmed the effect in arbitrary shielding material after Qualitiy Control was carried out for accuracy in an experiment of mobile photographing equipment. The performance evaluation was conducted with the fabrics of selenium, 0.2 mmPb, 0.1 mmPb and aluminiums. Considering the result, we choosed 0.1 mmPb and attached cover to mobile photographing equipment. We have finished making the cover after drew up the draft to attach cover to mobile photographing equipment through the modeling and the structural analysis. the process of the study is that we assembled the manufactured structures and carried out the practical experiment to take the photograph after attaching the fabric of 0.1 mmPb to mobile photographing equipment. It is need of additional thesises hereafter that we compare the result between the part to improve for safety besides convenience in photographic experiment about clinical radiation and the effect of covering the diffusion in condition attached the cover.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.269-279
• /
• 2005

Okso, Keun Seob($1671\sim1759$) was descended from a noble family of Noreun(노론) and learned from his uncle, Keun Sang-ha who is a disciple of Song Si-Yeol, Kim Chang-hyeub and Kim Chang-heub. His $\lceil$Oksoko$\rfloor$ remains in the form of a transcription or a lithographic printing, and documents on 'Hakchangeui' are recorded in jabeui(잡의), Euijedogi(의제도기), which is a part of it. He left Seoul in 1714, settled in Chungpung, journeyed to many places, including the Hwang river area and Jecheon and led a literary and artistic life as Sadaebu(사대부), which was written in a collection of his works where the record about 'Hakchangeui', the most suitable clothes for the life of a retired scholar remains today to express one part of his life. This study introduces data about Hakchangeui written in $\lceil$Oksoko$\rfloor$, pursues the reason why Okso, Keun Seob told about it and intends to embody the figure of Hakchangeui based on the system, measure, material, and sewing method according to the records in a collection. Hakchaneui described in $\lceil$Oksoko$\rfloor$ reveals a structure that is different from old Hakchaneui, showing characteristics like the following. It is a Sadaebu's costume for field amusement in which the length of a former part is longer than that of a later part and the side seam of a garment rips. Black Yeon is attached to the white texture. Yeon widths of Git(collar), Sugu and Gil are varied, respectively. Yeon's figure attached to Gil and Somaejindong is a mountain. Git is Bangryeong and link parts between Git and Gil is connected with Sangchim. This Hakchangeui is considered to playas a gown because it has no string or support to adjust his dress. Especially we can identify that Hwayanggun(화양건) was used in this Hakchangeui.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.70-76
• /
• 2012

This paper deal with vehicle fire caused by damage of diesel particulate filter (DPF) on diesel passenger vehicles. In order to reduce particulate matters included exhaust gases, a DPF in the exhaust system were installed diesel vehicles. A DPF was broken by excessively trapped particulate matters, regeneration error with a malfunction of ECU and defect of suction system such as swirl valve. If the DPF was broken, hot exhaust gases was released to the bottom of vehicle and released hot exhaust gases lead to occur the fire through combustible materials around the exhaust system. When a fire happened in the diesel vehicle caused by damage of DPF, silicate inorganic compounds were attached to the exhaust ventilation pipe and muffler. The silicate inorganic compounds were created by DPF combustion consisting of raw material ceramics. If the silicate inorganic compounds attached to the tail pipe in the diesel passenger vehicles, its fire cause will be assumed damage of DPF.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.290-298
• /
• 2019

The sound absorption coefficient and transmission loss of several types of rice hull mats with varying apparent densities and thicknesses are estimated in this paper using the transfer function and matrix methods, respectively, to evaluate the possibility of using rice hull as an acoustic construction material. The mean sound absorption rates of 10-cm-thick rice hull mats with target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 0.91, 0.92, and 0.95, respectively, while those of the 1-cm-thick plywood attached to the back of the rice hulls were 0.90, 0.92, and 0.92, respectively. The means of the sound transmission loss of the 10 cm-thick rice hull mats with the target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 7.66 dB, 10.49 dB, and 14.14 dB, respectively, while those of the 1 cm-thick plywood attached to the back of the rice hulls were 33.34 dB, 36.72 dB, and 38.95 dB, respectively. In conclusion, a rice hull mat could be used as acoustic construction materials because of its high sound absorption coefficient and sound transmission loss.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.122-129
• /
• 2012

This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.