• Toxicological Research
• /
• 제27권3호
• /
• pp.143-147
• /
• 2011

Cadmium is considered one of the most toxic, non biodegradable heavy metal for the human and animals. The purpose of the present study was to investigate the changes in biochemical parameters of blood and accumulation of cadmium in various tissue caused by various levels of dietary cadmium chloride ($CdCl_2$) in broiler chicks. $CdCl_2$ was administered through drinking water to broiler chicks. In spectral analysis, $CdCl_2$ treatment caused a significant increase in Glutamate pyruvate transaminase (GPT), creatinine and uric acid levels in all treated groups. Intriguingly, the GPT, creatinine, and uric acid levels were significantly higher at 75 mg/kg as compared to the groups treated with high doses (100, 125 and 150 mg/kg) of $CdCl_2$. Atomic Absorption Spectrophotometer (AAS) was used for the determination of Cd accumulation in kidney, liver and Breast muscles. AAS analysis revealed that Cd accumulation is increased in breast muscles as compared to liver and kidney at higher doses of Cd than 75 mg/kg.

• 보존과학회지
• /
• 제16권
• /
• pp.15-20
• /
• 2004

조선시대 최초의 동전은 조선통보이며 1423년에 주조되었다. 조선통보 2점을 입수하여 원자흡수분광분석법 및 중성자방사화분석법으로 모두 9종의 성분함량을 결정하였고 열이온화질량분석법으로 납동위원소비를 결정하여 원료의 산지를 추정하였다. 조선통보의 성분조성은 $Cu\;90\%,\;Pb\;3\~4\%,\;Sn\;2\~3\%$ 로서 중국과 일본의 동전과는 다른 조성을 나타내었다. 납동위원소비 분석결과 중국남부 방연석 분포범위에 속하였으며 통계적 분석법으로서 선형판별식분석법이 유용하게 사용될 수 있음을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권1호
• /
• pp.63-73
• /
• 2018

Rice is a staple food source in Asian countries. In paddy field, rice plant can take up toxic elements through its roots from contaminated soils, and its leaves and grain can absorb the toxic elements deposited on the soil surface. A totla of 40 soil and polished rice samples were collected around four abandoned metal mines in Korea and analyzed for As, Cd, Cu, Pb and Zn by atomic absorption spectrophotometer (AAS). The average contents of As, Cd, Cu, Pb and Zn in rice grain grown on the contaminated soils were 0.247, 0.174, 4.694, 0.804 and 16.78 mg/kg, respectively. These levels are higher than worldwide average concentrations. Assuming the rice consumption of 169 g/day by overall households in Korea, the estimated daily intakes from the rices were found to be 33, 48, and 63% for As, Cd, and Pb, respectively, of the acceptable daily intake (ADI) suggested by the FAO/WHO Joint Food Additive and Contaminants Committee.

• 대한화학회지
• /
• 제40권3호
• /
• pp.196-201
• /
• 1996

혈액 중 미량 카드뮴 분석에 전기로 장치가 부착된 원자 흡수 분광광도계(GFAAS)를 사용하였다. 시료를 1% Triton X-100으로 10배 희석시킨 다음 회화 온도 500$^{\circ}C$에서 Fork platform흑연 튜브를 사용하여 분석하였으며, 결과 처리는 피크 면적법과 피크높이법으로 비교하였다. 양쪽 모두 우수한 값을 얻을 수 있었으며 SH 바탕보정법과 $D_2$ 바탕보정법에 의하여 얻은 검출한계는 각각 0.02ng/mL와 0.01ng/mL이고 상대 표준편차는 1.0ng/mL 종도에서 5%이내였다. 분석의 정확성을 평가하기 위하여 노르웨이 Nycomed Pharma사의 Seronorm (Trace Elements Whole Blood)을 분석, 비교 검토 하였다.

• 한국광물학회지
• /
• 제3권1호
• /
• pp.44-57
• /
• 1990

Mineralogy of clay(Napseok) deposits in Yangsan area has been studied by the methods of field investigation and laboratory works including the polarizing microscopy, X-ray diffraction, infrared spectroscopy, thermal analysis, chemical analysis by electron micro-probe and atomic absorption spectrophotometer, and electron microscopy(SEM and TEM). The Napseok ores in both the Cheonbulsan and Yongcheon deposits consist mainly of sericite, pyrophyllite and quartz, with more or less tourmaline. The high temperature minerals such as corundum and dumortierite are found in the Cheonbulsan deposit, but not in the Yongcheon deposits. Dickite, nacrite, and halloysite are found in the Yongcheon deposit, but not in the Cheonbulsan deposit. The Napseok ores of the Yukwang deposit consist of sericite posits in the Yangsan area. Occurrence, chemistry and structural features of important minerals are described. Mineralogical data of sericite such as intensity raios and chemistry also support that the Napseok deposits of both the Chenobulsan and Yongcheon mines were formed at the higher temperature than those of the Yukwang mine. Presence of sericite-dickite-pyrophyllite ores in the Yongcheon deposit also suggests the lower temperautre than in the Cheonbulsan deposit.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• Composites Research
• /
• 제34권6호
• /
• pp.373-379
• /
• 2021

A series of novel PBI/SrTiO₃ nanocomposite membranes composed of polybenzimidazole (PBI) and strontium titanate (SrTiO₃) with a perovskite structure were fabricated with various concentrations of SrTiO₃ through a solution casting method. Various characterization techniques such as proton nuclear magnetic resonance, thermogravimetric analysis, atomic force microscopy (AFM) and AC impedance spectroscopy were used to investigate the chemical structure, thermal, phosphate absorption and morphological properties, and proton conductivity of the fabricated nanocomposite membranes. The optimized PBI/SrTiO₃-8 polymer nanocomposite membrane containing 8wt% of SrTiO₃ showed a higher proton conductivity of 7.95 × 10^-2 S/cm at 160℃ compared to other nanocomposite membranes. The PBI/SrTiO₃-8 composite membrane also showed higher thermal stability compared to pristine PBI. In addition, the roughness change of the polymer composite membrane was also investigated by AFM. Based on these results, nanocomposite membranes based on perovskite structures are expected to be considered as potential candidates for high-temperature PEM fuel cell applications.

• 분석과학
• /
• 제36권2호
• /
• pp.70-79
• /
• 2023

The synthesis of the Mannich base as a ligand (L) N-(morpholino (phenyl) methyl) acetamide is the subject of this study. Elemental analyses, FT-IR spectra, UV-vis, ¹H-NMR, and magnetic measurements were used to confirm the synthesis of the [Ni(L)₂]Cl₂ complex, thermal analysis (TG/DTG), atomic absorption, and scanning, and structurally explained as electron microscopy (SEM), and X-ray powder diffraction (XRD) methods. The melting point of the complex and its molar conductivity were also measured. The suggested geometries of the complexes formed have a tetrahedral structure, according to the data acquired using various techniques. Theoretical approaches to the complex formation have been investigated. For molecular mechanics and semi-empirical calculations, the HYPERCHEM6 program had been used. The effect of the novel Ni(II) complex on the cancer cell Hepa-2 (human hepatocellular ademocarcinoma), that is the human laryngeal cancer, was studied. It has been found that these ligand and complex have potent effects on the cancer cell. The antibacterial activity of the free ligand and its complex was evaluated against two kinds of human pathogenic bacteria. The first category is Gram-positive (Staphylococcus aureas, epiderimids), whereas the second group is Gram-negative (Psedamonas aeruginosa, Escherichia coli) (from the diffusion method). Finally, it was discovered that various chemicals had varied growth-inhibiting effects on bacteria.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.