• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1444-1446
• /
• 2009

The atmospheric pressure plasma polymerization of acrylate monomers was carried out to have dielectrics with easy preparation and high performance. The effects of discharge power, monomer concentration and deposition time on film properties were investigated using various characterization tools. With proper conditions, smooth dielectric layer of 100nm thickness was obtained. Dielectric property as organic dielectric layer has been studied for future applications in organic thin film transistors(OTFT).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.428-432
• /
• 2009

40 goat kid ribcages were held for 7 days in storage conditions ($4^{\circ}C$) and used to determine the effects of three different packaging methods (atmospheric air, vacuum and modified atmosphere package (MAP) 10:70:20 mixture of $N_2:O_2:CO_2$) on meat quality of the chops. L* was affected by the packaging method being lighter than MAP chops. The coordinate a* significantly increased during storage time. For MAP-packed chops and those kept in atmospheric air, b* increased markedly during storage time whereas it remained unaffected throughout storage when in vacuum packages. Final pH values ranged from 5.6 to 5.8 and no effects were found for either storage time or packaging method. WHC means were lowest for the three packaging methods on day 7 of storage and highest on day 1. Storage time increased water loss in vacuum treatments. Trained panel colour acceptability was lower at 3, 5 and 7 days than on day 1 of storage for atmospheric air treatment and vacuum packaging, while for the MAP treatment average values on days 5 and 7 were lower than those observed on days 1 or 3. Trained panel odour was lower for atmospheric air and vacuum packages at 3, 5, and 7 days storage than at 1 day, while no differences were found in trained panel odour acceptability for MAP packages. With reference to consumers, the MAP proposed in the present study is the chosen method for storing goat meat, rather than vacuum or atmospheric air packaging.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.3
• /
• pp.211-223
• /
• 2000

The atmospheric dispersion of a pollutant emitted from a hypothetical source located in the middle of the Yochon Industrial Estate was simulated by using the Regional Atmospheric Modeling System (RAMS). Four horizontally nested grids were employed: the coarsest one covered the southern part of the Korean Peninsula including Mt. Chiri and the finest one covered the Yochon Industrial Estate and the surrounding area. Wind fields were initially assumed horizontally homogeneous with a wind speed of 4m/s, the average for the Yosu area, and were developed without both external forces and diurnal changes in order to investigate the terrain-induced phenomena. Wind directions that could emphasize the terrain effects on the pollutant transport and that could carry pollutants to a highly-popluated area were selected for the dispersion study. A pollutant was released for 24hours from a grid-base volume source after a 24-h blank run for developing the wind field. The dispersion study showed that the pollutant from the present source location did not directly affect the Yosu City, but showed high concentrations at locations behind the hills 5 to 6 km away from the source according to wind directions. When the wind speed was low, close to calm condition, the pollutant was detected at upstream locations 6 to 7 km from the source. In comparison with the results from the RAMS simulation, the Industrial Source Complex Short-Term Model(ISCST3) predicted a narrow dispersion that was sensitive to the wind direction. When the wind velocity was affected by the local environment, the ISCST3 calculation using that data also gave a lop-sided result, which was different from the distribution of the pollutant reproduced by RAMS.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.87-93
• /
• 1997

Radiometers in UV and visible wavelengths were onboard the Korean Sounding Rocket(KSR)-1 and 2 which were launched on June 4th and September 1st, 1993. These radiometers were designed to capture the solar radiation during the ascending period of the rocket flight. The purpose of the instrument was to measure the vertical profiles of stratospheric ozone densities. Since the instrument measured the solar radiation from the ground to its apogee, it is possible to investigate the altitude variation of the measured intensity and to estimate the effect of atmospheric scattering by comparing the UV and visible intensity. The visible channel was a reference because the 450-nm wavelength is in the atmospheric window region, where the solar radiation is transmitted through the atmosphere without being absorbed by other atmospheric gases. The use of 450-nm channel intensity as a reference should be limited to the altitude ranges above the certain altitudes, say 20 to 25km where the signals are not perturbed by atmospheric scattering effects.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.655-664
• /
• 2023

Ghost imaging (GI) technology is developing rapidly, but there are inevitably some limitations such as the influence of atmospheric turbulence. In this paper, we study a ghost imaging system in atmospheric turbulence and use a gamma-gamma (GG) model to simulate the medium to strong range of turbulence distribution. With a compressed sensing (CS) algorithm and generative adversarial network (GAN), the image can be restored well. We analyze the performance of correlation imaging, the influence of atmospheric turbulence and the restoration algorithm's effects. The restored image's peak signal-to-noise ratio (PSNR) and structural similarity index map (SSIM) increased to 21.9 dB and 0.67 dB, respectively. This proves that deep learning (DL) methods can restore a distorted image well, and it has specific significance for computational imaging in noisy and fuzzy environments.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.167-169
• /
• 2005

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.19-26
• /
• 1986

The degree of air pollution is usually presented in terms of concentration. But, in evaluating the environmental impacts or air pollution control policies, the concentration values need to be interpreted in terms of damage effects on property and human health. The damage effect varies with the types of pollution, subjects and land use pattern of an affected area. Therefore, this study is aimed at developing a method of analyzing effects of various types of air pollutions on surrounding environmental setting with the EIMS (Environmental Information Management System) developed for land suitability analysis. Using the method formulated in this study, the long- term effects of such pollutants as $SO_2$ and HF on types of vegetation and residents, and potential, short-term effects of HCl leak accidents from manufacturing facilities in Ulsan and Onsan Industrial complex are analyzed. The presentation of the damage effects of air pollution rather than the concentration of pollutants will be useful for the preparation of environmental impact statements, the formulation of environmental policies, and the development of land use plans in heavily industrialized areas.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.259-264
• /
• 2005

This paper have derived an expression(the fringe modle is used) for the photocurrelation-correlation function for a cross-beam laser velocimeter, taking into account the effects of atmospheric turbulence on the amplitude and phase of the incident beams. the result, as long as the atmospheric disturbances do not greatly damp out sinusoidal variations of the photocurrent-correlation function in the time it takes a particle to travel the fringe-separation distance, the disturbances do not hinder the determination of the velocity of the partides from the correlation funtion.(the scattering particles are assumed to have a well-defined V).

• Asian Journal of Atmospheric Environment
• /
• v.6 no.3
• /
• pp.192-205
• /
• 2012

The effects on birch (Betula spp.) of elevated carbon dioxide ($CO_2$) and ozone ($O_3$), which are both increasing in the troposphere, are surveyed in detail based on the literature. Birches establish themselves in the open field after disturbances, and then become dominant trees in temperate or boreal forests. Ecophysiological approaches include the measurement of photosynthesis, biomass, growth, and survival of seedlings and trees. Elevated $CO_2$ levels give rise to a net enhancement of the growth of birch trees, whereas high $O_3$ generally reduces growth. Although the effects of the two are opposed, there is also an interactive effect. Basic physiological responses of the single genus Betula to $CO_2$ and $O_3$ are set out, and some data are summarized regarding ecological interactions between trees, or between trees and other organisms.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.113-119
• /
• 1995

We have reported that an Fe-17wt%Mn alloy exhibits the highest damping capacity in the Fe-Mn binary system. In the present work, the effects of copper content on the damping capacity, atmospheric corrosion and mechanical properties were studied. The damping capacities were measured at room temperature for the air cooled Fe-17wt%Mn alloy having copper content from 0.1wt% to 1.1wt%. The damping capacity of the Fe-17wt %Mn alloy was decreased with increasing copper content. However, the addition of Copper was found to improve mechanical properties and atmospheric corrosion resistance. These mechanical properties were attributed to the formation of stress-induced martensite during tensile test.