• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.1
• /
• pp.17-24
• /
• 2009

This study was conducted to find out the effects of relationship between ocean-meteorological factors and snowfall at Incheon, Gunsan and Mokpo when cold and dry continental air mass passed through the West Sea of Korea in winter. Mean snowfall from December to February showed the order of Gunsan (12.7 cm), Mokpo (9.0 cm) and Incheon (7.8 cm). In particular, the snowfall in the three regions showed the regional difference in December and February. It was well consistent with the extension of continental high. Extension of continental high can cause effect on snowfall at the west regions (Inchoen, Gunsan, Mokpo) of the Korean Peninsula. The continental high extended from the southern China to western coastal region of the Korean Peninsula in December, it extended from the northern China to central area of the Korean Peninsula in January. It also extended from the north side of China through Bohai Sea and Yodong Peninsula to central area of the Korean Peninsula in February. Therefore, more snowfall recorded in Incheon is higher in February than December whereas Gunsan and Mokpo is the opposite. The heavy snowfall at the three regions was caused by loss of the heat from the ocean to air when the heat loss was higher than 100 $W/m^2$. The heavy snowfall was also observed when the arrangement of continental high atmospheric pressure and low pressure was high at the west and low at the east, which formed a front in West and when the wind blow from the North or North West at the speed of 4${\sim}$8 m/sec.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.104-110
• /
• 2006

Growth in population and urbanization has progressively increased the loadings of pollutants from non-point sources as well as point sources. Accordingly, release of contaminants from non-point sources, released with surface runoff of rainwater, is influenced by atmospheric phenomena, geology, and topography. This makes the control of non-point source difficult. Therefore, this study intends to reveal the characteristics of runoff and particle size distribution to observe the fundamental characteristics of runoff. Experiments were carried out at inner road of research center. Average concentration of runoff ranged from 26.8 to 126.4 mg/L for SS and $COD_{Cr}\;15.3{\sim}117.7mg/L,\;TN\;0.07{\sim}5.16mg/L,\;TP\;0.06{\sim}0.49mg/L$ and heavy metals $0.00{\sim}0.29mg/L$. First flush, indicated wash off of pollutant at first rain, was observed for all types of pollutants. Most pollutants revealed a very close correlation with SS ($R^2=0.93{\sim}0.99$). After analyzing characteristics of particle, particle was finer than that from previously examined data.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.93-103
• /
• 1999

The steady-state performance analysis program for turboprop engine which was used for a small, middle industrial aircraft and a basic trainer aircraft was developed and linear Gas Path Analysis method was applied to Engine Health Monitoring for Turboprop engine. This program was compared with TURBOMARCH program which is well known with performance and power according to flight Mach No. at the standard atmospheric condition to prove a steady-state performance analysis program. From the result, inlet, exit temperature and pressure of each component had error within 3% and especially power according to flight Mach No. had error within 2.4% so that this program could be assured. To make sure if linear Gas Path Analysis is reasonable four cases were selected. The first is the case that fouling is occurred in compressor only. The second is the case that fouling is occurred in compressor and erosion is occurred in turbine. The third is the case that erosion is occurred in both compressor and turbine and power turbine at the same time. Finally, the case that fouling and erosion are occurred in compressor, compressor turbine and power turbine was selected. Different parameters were selected impartially among the independent parameters so that the effect of measurement parameter selection was observed. From the result, the more measurement parameters the smaller RMS error and even though the number of measurement parameters was the same, the RMS error was obtained differently according to which measurement parameters were selected. The case using eight instrument parameters of case IV-4 had small error comparably and was economic and it was important to select optimal number of measurement and optimal measurement parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.333-338
• /
• 2016

The purpose of this study was to understand the pollution level of the surface sediment of Sihwa Lake by assessing its geochemical characteristics and investigating the spatial distribution of trace metals and organic matter. In the surface sediment of Sihwa lake, the mean grain size was between 2.94 and 6.35 Ø and the main type of sediment was sandy silt. The concentrations of As, Co, Cr, Ni, V and Li among the metal elements in the surface sediment were correlated with the mean crust concentration (p<0.05). Based on the strong correlation between the metals (Cd, Cu, Pb and Zn) and organic matter (Ignition Loss), the concentrations of these metal elements seem to be controlled by the organic matter dilution effect. The trace metal pollution level, determined by applying the Republic of Korea Marine environmental standard and the US National Oceanic and Atmospheric Administration's sediment quality guidelines, showed the pollution level of As to be either close to or in excess of the above-mentioned standards at almost all levels. The enrichment factor and geoaccumulation index of As showed that there was an incremental increase of pollution by elements other than V, Cr, Co, Fe, Al and Mn. Moreover, the nearby industrial area and dike were more polluted than the other areas, so the surface sediments in Sihwa lake should be monitored by taking into consideration the geological variations.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.501-511
• /
• 2015

This study suggests a method of alleviating global warming by the increase of the Earth surface albedo through Artificial Sea ice Increasing (ASI) over the Available Freezing Areas (AFA). The method is developed based on the fact that the large sea surface area in or near the Arctic and the Antarctic has no ice even though both water and air temperatures are below zero and the artificial sea ice generation is thus available. The mean energy of $0.85Wm^{-2}$, which was suspected of adding to the earth by the global warming effect was calculated to offset at once when the sea ice area about $4.09{\times}10^6km^2$ was additionally increased. In addition, three techniques for producing ice plates on the sea surface (using ships, installation apparatus, and floating matter such as Green Cell Foam) for ASI were proposed. According to the result of simple analysis using the energy balance model, when ASI was maximally operated only for 3 months (September, October, and November) over AFA, it is expected that the annual mean temperature of earth surface would be decreased about $0.11^{\circ}C$ in the following year. On the other hand, in case of generating the artificial sea ice in all four seasons, a risk of triggering snowball earth was detected.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.280-293
• /
• 2012

In order to clarify the characteristics of dispersion of volcanic tephra emitted from the Mt. Baegdu with various eruption environment, numerical analysis were performed using numerical models, Weather Research and Forecast (WRF) and FLEXPART. Synoptic conditions at 12 October 2010 was adopted because the volcanic ash of Mt. Baegdu can reach the Korean peninsula and its dispersion pattern was compared with different Volcanic Explosivity Index (VEI) and particle size. Predominant size of falling out ash flowing in the peninsular is smaller than 0.5 mm and the ash large than the size is difficult to get in the peninsular due to the its weak ability of truculent diffusion. the difference of ash distribution with various VEI scenarios is not so much but number density of ash in the air is dramatically changed. Volcanic ash tends to be deposited easily in eastern coastal area such as Gangneung and Busan, because of the inflow of ash from East Sea and barrier effect of the Taeback mountains along the east coast of the Korean Peninsula. Accumulated amount of ash deposition can be increased in short period in several urban areas.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.444-452
• /
• 2006

This paper reports experimental excess molar volumes $V^E_m$ using a digital vibrating-tube densimeter and excess molar enthalpies $H^E_m$ by means of an isothermal microcalorimeter with a flow mixing cell for the binary mixtures{1,2-dichloropropane + 2-(2-methoxyethoxy)ethanol} and {1,2-dichloropropane + 2-(2-ethoxyethoxy)ethanol} at 298.15 K under atmospheric pressure. All the $V^E_m$ and $H^E_m$ of the two binary mixtures showed S-shaped forms, being negative for poor and positive for rich 1,2-dichloropropane mole fractions. These show that the excess properties were shown to be negative deviation from ideality due to the strong self-association effect among 2-(2-alkoxyethoxy)ethanol molecules at an early stage of mixing, a relatively high energy then is needed to break hydrogen bonds of 2-(2-alkoxyethoxy)ethanol with an increase ofhalogenated hydrocarbon molecular at high mole fraction of 1,2-dichloropropane. The values of excess molar properties($V^E_m$ and $H^E_m$) were fitted by the Redlich-Kister equation using Nelder-Mead's simplex pattern search method. The Wilson, NRTL, and UNIQUAC models were used to correlate the $H^E_m$ values.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.477-486
• /
• 2008

Acrylic resin is widely used in dental practice. However, the residual monomer in acrylic resin could act as a negative biocompatability on human body. The aim of this study was to evaluate the amount of the monomer elution from polymerized orthodontic acrylic resin. Orthodontic acrylic resin was used in the study. The curing condition of the resin was controlled by temperature, pressure, aquatic and atmospheric environment. The duration and amount of monomer elution and timedependent plot was recorded by high performance liquid chromatography. The result showed that the only monomer eluted from the resin was methyl methacrylic acid. And the amount of the monomer elution has diminished considerably by time progress especially within 24 hours. Furthermore, elution of the residual monomer was significantly lower in group of pressure, moisture and elevated temperature than control (p<.05). According to this study, it was thought that the elution of residual monomer might be influenced by curing environment.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2008

To construct in situ velocity-porosity relationships for oceanic basalt, considering crack features, P- and S-wave velocity measurements on basaltic samples obtained from the eastern flank of the Juan de Fuca Ridge were carried out under confining pressures up to 40 MPa. Assuming that the changes in velocities with confining pressures are originated by micro-crack closure, we estimated micro-crack aspect ratio spectra using the Kuster-$Toks{\ddot{o}}z$ theory. The result demonstrates that the normalised aspect ratio spectra of the different samples have similar characteristics. From the normalised aspect ratio spectrum, we then constructed theoretical velocity-porosity relationships by calculating an aspect ratio spectrum for each porosity. In addition, by considering micro-crack closure due to confining pressure, a velocity-porosity relationship as a function of confining pressure could be obtained. The theoretical relationships that take into account the aspect ratio spectra are consistent with the observed relationships for over 100 discrete samples measured at atmospheric pressure, and the commonly observed pressure dependent relationships for a wide porosity range. The agreement between the laboratory-derived data and theoretically estimated values demonstrates that the velocity-porosity relationships of the basaltic samples obtained from the eastern flank of the Juan de Fuca Ridge, and their pressure dependence, can be described by the crack features (i.e. normalised aspect ratio spectra) and crack closure.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.129-140
• /
• 2007

CFC(CFC-12, CFC-11 and CFC-113) analytical system for air and water was constructed using a customized purge and trap extraction device and a gas chromatograph with an electron capture detector. Sampling methods of air and water for CFCs were also established. The analytical system was experimentally optimized to result in reproducibilities of triplicates less than 2% for current air samples and less than 5% for groundwater samples with CFC-12 concentration of 160 to 180 pg/kg, and verified with respect to the CFC system in USGS, which showed analytical results were in agreement within 10%. CFCs in air were monitored at three sites over 19-month period in the central part of South Korea, and the result indicates no significant local sources of CFCs in those areas. For groundwater in Jeju Island, CFCs were measured over a year with a two-month interval. The time-series data showed seasonal fluctuations which could be interpreted by the effect of recharge pulse derived from large amount of rainfall during monsoon period with a few month delay, which indicates high permeability of basaltic rocks in Jeju Island.