• BMB Reports
• /
• v.40 no.2
• /
• pp.218-225
• /
• 2007

In Arabidopsis thaliana, the microtubule-associated protein AtMAP65-1 shows various functions on microtubule dynamics and organizations. However, it is still an open question about whether AtMAP65-1 binds to tubulin dimers and how it regulates microtubule dynamics. In present study, the tubulin-binding activity of AtMAP65-1 was investigated. Pull-down and co-sedimentation exp eriments demonstrated that AtMAP65-1 bound to tubulin dimers,at a molar ratio of 1 : 1. Cross-linking experiments showed that AtMAP65-1 bound to tubulin dimers by interacting with $\alpha$-tubulin of the tubulin heterodimer. Interfering the bundling effect of AtMAP65-1 by addition of salt and monitoring the tubulin assembly, the experiment results indicated that AtMAP65-1 promoted tubulin assembly by interacting with tubulin dimers. In addition, five truncated versions of AtMAP65-1, namely AtMAP65-1 $\Delta$N339 (amino acids 340-587); AtMAP65-1 $\Delta$N494 (amino acids 495-587); AtMAP65-1 340-494 (amino acids 340-494); AtMAP65-1 $\Delta$C495 (amino acids 1-494) and AtMAP65-1 $\Delta$C340 (amino acids 1-339), were tested for their binding activities and roles in tubulin polymerization in vitro. Four (AtMAP65-1 $\Delta$N339, $\Delta$N494, AtMAP65-1 340-494 and $\Delta$C495) from the five truncated proteins were able to co-sediment with microtubules, and three (AtMAP65-1 $\Delta$N339, $\Delta$N494 and AtMAP65-1 340-494) of them could bind to tubulin dimers in vitro. Among the three truncated proteins, AtMAP65-1 $\Delta$N339 showed the greatest activity to promote tubulin polymerization, AtMAP65-1 $\Delta$N494 exhibited almost the same activity as the full length protein in promoting tubulin assembly, and AtMAP65-1 340-494 had minor activity to promote tubulin assembly. On the contrast, AtMAP65-1 $\Delta$C495, which bound to microtubules but not to tubulin dimers, did not affect tubulin assembly. Our study suggested that AtMAP65-1 might promote tubulin assembly by binding to tubulin dimers in vivo.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.65-71
• /
• 2014

A Varian Portal Dosimetry system was compared to an isocentrically mounted MapCHECK 2 diode array for volumetric modulated arc therapy (VMAT) QA. A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire VMAT QA images for 13 plans using four photon energies (6, 8, 10 and 15 MV). The EPID-based QA images were compared to the Portal Dose Image Prediction calculated in the Varian Eclipse treatment planning system (TPS). An isocentrically mounted Sun Nuclear MapCHECK 2 diode array with 5 cm water-equivalent buildup was also used for the VMAT QAs and the measurements were compared to a composite dose plane from the Eclipse TPS. A ${\gamma}$ test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison at 1%/1 mm (dose difference/distance-to-agreement), 2%/2 mm, and 3%/3 mm criteria for both QA methods. The two-tailed paired Student's t-test was employed to analyze the statistical significance at 95% confidence level. The average ${\gamma}$ passing rates were greater than 95% at 3%/3 mm using both methods for all four energies. The differences in the average passing rates between the two methods were within 1.7% and 1.6% of each other when analyzed at 2%/2 mm and 3%/3 mm, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1 mm; the difference was lower for 8 MV and 10 MV. However, the differences were not statistically significant for all criteria and energies (p-values >0.05). The EPID-based QA showed large off-axis over-response and dependence of ${\gamma}$ passing rate on energy, while the MapCHECK 2 was susceptible to the MLC tongue-and-groove effect. The two fluence-based QA techniques can be an alternative tool of VMAT QA to each other, if the limitations of each QA method (mechanical sag, detector response, and detector alignment) are carefully considered.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.43-47
• /
• 1999

To develop a wrapping film, which suppresses the microbial decay through the storage and distribute of greenhouse fresh produce, the antimicrobial packaging films were made and applied to the preservation of grapes(Campbell early). For the purpose the films were made by adding 1% grapefruit seed extract(GFSE) to LDPE film(Control). Graps were separately wrapped with packaging films in the state of closely-adhered packaging as well as modified atmosphere packaging(MAP). The wrapped grapes were stored at 5$^{\circ}C$ for 65 days and then the colony count of contaminated microorganims, decay ration of grapes, the gas component within the packages and chemical qualities were investigated. The antimicrobial film packaging showed the efficient results to suppress microbial growth as compared with control. The total number of containated microorganisms were decreased gradually through all the storage period. In the closely-adhered packaging and MAP the decay ratios of grapes was 31% and 19%, indivisually. After the storage period of 65 days, the interior gas components of MAP were 4.5% of O2 and 17.6% of CO2, which were efficient for the storage of grapes. In addition, no negative effects in sweetness and acidities occurred.

• The Korean Journal of Ecology
• /
• v.19 no.5
• /
• pp.403-416
• /
• 1996

Global natural vegetation mapping (GNVM) system was developed for estimating potential forest area of the globe. With input of monthly mean temperature and monthly precipitation observed at weather stations, the system spherically interpolates them into 1°×1°grid points on a blobe, converts them into vegetation types, and produces a potential vegetation map and a potenital vegetation area. The spherical interpolation was based on negative exponential function fed from the constant radius stations with oval weighing method which is latitudinally elongated weighing in temperature and longitudinally elongated weighing in precipitation. The temperature values were corrected for altitude by applying a linear lapse-rate (0.65℃ / 100m) with reference to a built-in digital terrain map of the globe. The vegetation classification was based upon Koppen’s sKDICe. The potential forest area is estimated for 6.96 Gha (46.24％) of the global land area (15.05 Gha).

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.168-171
• /
• 2004

The effects of alterations of dose of xylaznie (X) and Zoltil$\circledR$ (TZ) on canine anesthesia were examined. Experimental groups were divided into three (Group 1: X 1.1 mg/kg and TZ 10 mg/kg, Group 2: X 1.65 mg/kg and TZ 7.5 mg/kg, Group 3: X 2.2 mg/kg and TZ 5 mg/kg), and each had 5 dogs. A femoral artery was catheterized for measurement of blood pressure, and baseline value was measured. The dogs were sedated with xylazine intramuscularly, then after 10 minutes TZ were injected intravenously. Mean arterial blood pressures (MAP), duration of analgesia, mean arousal time (MAT) and mean walking time (MWT) after TZ injection were measured, and the depth of analgesia and the quality of recovery were scored. The values of MAP were recorded from the time of pre-xylazine injection to arousal. Duration of analgesia and was assessed by tail clamping test, and which were done at 10 minutes intervals after TZ injection. The decreases of MAP from 40 minutes after TZ injection were significant (p<0.05). In group 2, MAP at 20 minutes, and from 40 minutes to arousal were significantly decreased (p<0.05). In group 3, MAP were significantly decreased from 40 minutes. MAT were 62.2$\pm$9.2 minutes in group 1, 60.2$\pm$7.5 minutes in group 2, and 71.0$\pm$6.9 minutes in group 3. MAT in group 3 was significantly increased compared with group 2 (p<0.05), and the differences of MWT among each groups were not significant (p>0.05). The scores of quality of recovery were significantly lowered in group 3 compared with group 1 or group 2, which means the side effects of recovery were less occurred. Thus, it was considered that the combination X 2.2 mg/kg IM and TZ 5 mg/kg IV is more effective to surgical procedures and to prevent long and rough recovery of Zoletil anesthesia.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2008

This research is aimed at offering a fundamental data for the adjustment of cadastral inconsistency of administrative boundary areas from this time onward by analyzing actual conditions of cadastral inconsistency at the study areas by the use of digital topographic map and digital cadastral map of si-gun-gu boundary area. As a result of examining the actual condition of cadastral inconsistency at the surveyed areas, the extent of cadastral inconsistency of the neighboring administrative boundary areas was assessed as ${\pm}3.15m$ of RMSE on X coordinates and also assessed as ${\pm}2.85\;m$ of RMSE on Y coordinates; in addition, RMSE of the neighboring district of the administrative boundary areas on X coordinates was assessed as ${\pm}1.33\;m$, and ${\pm}0.75\;m$ of RMSE on Y coordinates respectively-thus, this research could suggest the fact that there has arisen a lot of cadastral inconsistency areas at administrative boundary areas.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.2
• /
• pp.65-71
• /
• 2017

To assess the effects of filter and reconstruction of Cu-64 PET data on Siemens scanner, the various reconstruction algorithm with various filters were assessed in terms of spatial resolution, non-uniformity (NU), recovery coefficient (RC), and spillover ratio (SOR). Image reconstruction was performed using filtered backprojection (FBP), 2D ordered subset expectation maximization (OSEM), 3D reprojection algorithm (3DRP), and maximum a posteriori algorithms (MAP). For the FBP reconstruction, ramp, butterworth, hamming, hanning, or parzen filters were used. Attenuation or scatter correction were performed to assess the effect of attenuation and scatter correction. Regarding spatial resolution, highest achievable volumetric resolution was $3.08mm^3$ at the center of FOV when MAP (${\beta}=0.1$) reconstruction method was used. SOR was below 4% for FBP when ramp, Hamming, Hanning, or Shepp-logan filter were used. The lowest NU (highest uniform) after attenuation & scatter correction was 5.39% when FBP (parzen filter) was used. Regarding RC, 0.9 < RC < 1.1 was obtained when OSEM (iteration: 10) was used when attenuation and scatter correction were applied. In this study, image quality of Cu-64 on Siemens Inveon PET was investigated. This data will helpful for the quantification of Cu-64 PET data.

• Journal of Periodontal and Implant Science
• /
• v.48 no.5
• /
• pp.305-316
• /
• 2018

Purpose: The aim of the present study was to evaluate the biocompatibility and barrier function of mussel adhesive protein (MAP)-loaded collagen membranes in guided bone regeneration (GBR). Methods: Eight male New Zealand white rabbits were used. Four circular defects (diameter: 8 mm) were created in the calvarium of each animal. The defects were randomly assigned to 1) a negative control group, 2) a cyanoacrylate (CA)-loaded collagen membrane group (the CA group), 3) a MAP-loaded collagen membrane group (the MAP group), and 4) a group that received a polycaprolactone block with MAP-loaded collagen membrane (the MAP-PCL group). Specimens were harvested at 2 weeks (n=4) and 8 weeks (n=4) postoperatively for observational histology and histometric analysis. Results: In the histologic analysis, MAP was completely absorbed without any byproducts. In contrast, some of the CA adhesive remained, showing an inflammatory reaction, at 8 weeks. In the MAP-PCL group, the MAP-loaded collagen membranes served as a barrier membrane despite their fast degradation in GBR. No significant difference was found in the amount of new bone between the MAP-PCL and MAP groups ($1.82{\pm}0.86mm^2$ and $2.60{\pm}0.65mm^2$, respectively). Conclusions: The MAP-loaded collagen membrane functioned efficiently in this rabbit calvarial GBR model, with excellent biocompatibility. Further research is needed to assess clinical applications in defect types that are more challenging for GBR than those used in the current model.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.87-98
• /
• 2010

For generating accurate land cover map over the whole Korean Peninsula, post-mosaic classification method is desirable in large area where multiple image data sets are used. We try to derive an optimal mosaic method of multi-temporal Landsat ETM+ scenes for the land cover classification over the Korea Peninsula. Total 65 Landsat ETM+ scenes were acquired, which were taken in 2000 and 2001. To reduce radiometric difference between adjacent Landsat ETM+ scenes, we apply three relative radiometric correction methods (histogram matching, 1st-regression method referenced center image, and 1st-regression method at each Landsat ETM+ path). After the relative correction, we generated three mosaic images for three seasons of leaf-off, transplanting, leaf-on season. For comparison, three mosaic images were compared by the mean absolute difference and computer classification accuracy. The results show that the mosaic image using 1st-regression method at each path show the best correction results and highest classification accuracy. Additionally, the mosaic image acquired during leaf-on season show the higher radiance variance between adjacent images than other season.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.58-65
• /
• 1997

A new automatic classification method with high and stable accuracy for time-series image data is presented in this paper. This method is based on prior condition that a classified map of the target area already exists, or at least one of the time-series image data had been classified. The classified map is used as a reference map to specify training areas of classification categories. The new automatic classification method consists of five steps, i.e., extraction of training data using reference map, detection of changed pixels based upon the homogeneity of training data, clustering of changed pixels, reconstruction of training data, and classification as like maximum likelihood classifier. In order to evaluate the performance of this method qualitatively, four time-series Landsat TM image data were classified by using this method and a conventional method which needs a skilled operator. As a results, we could get classified maps with high reliability and fast throughput, without a skilled operator.