• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2014

The communications link in a space program is a crucial point for upgrading its performance by handling data between spacecraft bus and payloads, because spacecraft's missions are related to the data handling mechanism using communications ports such as a controlled area network bus (CAN Bus) and a universal asynchronous receiver and transmitter (UART). The NEXTSat-1 has a lot of communications ports for performing science and technology missions. However, the top level system requirements for the NEXTSat-1 are mass and volume limitations. Normally, the communications for units shall be conducted by using point to point link which require more mass and volume to interconnect. Thus, our approach for the novel communications link in the NEXTSat-1 program is to use CAN and serializer and deserializer low voltage differential signal (SerDesLVDS) to meet the system requirements of mass and volume. The CAN Bus and SerDesLVDS were confirmed by using already defined communications link for our missions in the NEXTSat-1 program and the analysis results were reported in this study in view of data flow and size analysis.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.274-280
• /
• 2000

The fact that error probability is higher in wireless communication environment than the one in a fixed network makes it inappropriate to apply the same DLC (Data Link Control) protocol used in a wireline network to a wireless network. And since the existing DLC protocol for wireless network was optimized for low-rate data service, it is not suitable for a wireless network environment which should support high-speed and multimedia traffic. Therefore it is desperate to have a new DLC protocol for todays wireless mobile communication environment. In this paper, we propose an error control scheme in WATM (Wireless Asynchronous Transfer Mode) environment. which supportsmultiple traffic attributes, high-speed, multimedia data service. In this paper we modified the existing ASR ARQ (Adaptive Selective Repeat Automatic Repeat Request) protocol where cells exceeding maximum allowable delay range are discarded. And adding FEC (Forward Error Correction) for delay-sensitive traffic resulted in smaller increase of transmission delay.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.7
• /
• pp.303-310
• /
• 2019

In the current mobile environment that is indispensable to our everyday lives, various forms of new business models are created including personalized services such as Google's "Google NOW" and Apple's "Siri". These services would not have been possible without technologies on the effective integration of various services and models. The requirements for effective integration of services include, 1) the efficient data sharing among multiple services, 2) the data-driven asynchronous execution of services, and 3) the simple extensible interaction method for the services. In this paper, we propose a mobile service architecture that utilizes the blackboard architecture to satisfy the aforementioned requirements to enable effective integration of various services, sharing and management of data between services, and asynchronous execution of services.

• ETRI Journal
• /
• v.26 no.2
• /
• pp.149-160
• /
• 2004

In this paper, we present an interactive data broadcasting system compliant with the Advanced Television Systems Committee (ATSC) standards. The proposed system provides users not only with various data broadcasting services but also remote interactive services. For various data broadcasting services, we have adopted a synchronized data injector that calculates the transmission time of synchronized data accurately and multiplexes synchronized data with the data of an MPEG-2 audio-visual program according to the calculated transmission time. To support remote interactive services, we designed and implemented a return channel server connected on a bi-directional interaction channel. Test results show that the proposed system provides both an asynchronous and synchronized data broadcasting service and remote interactive service appropriately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.221-227
• /
• 2002

In this paper, in order to know the effect of the interference, we have analyzed the BER (Bit Error Rate) performance of the MUD(Multi-User Detector) employing HIC(Hybrid Interference Cancellation) scheme for the asynchronous WCDMA system based on 3GPP(3rd Generation Partnership Project) Spec. through the In this paper, in order to know the effect of the interference, we have analyzed the BER (Bit Error Rate) performance of the MUD(Multi-User Detector) employing HIC(Hybrid Interference Cancellation) scheme for the asynchronous WCDMA system based on 3GPP(3rd Generation Partnership Project) Spec. through the computer simulation. we have assumed Rayleigh fading channel. And we have compared its BER performance with SIC's(Successive Interference Cancellation) and with PIC's(Parallel Interference Cancellation), which are the representative schemes in the subtractive interference cancellation. From the results, it is shown that PlC or HIC is effective for high data-rate users and SIC of HIC for low data-rate users to eliminate the interference. Regardless of the data rate, it is reasonable to use the HIC structure for WCDMA system to satisfy all of users' services. The reason is that the SIC scheme in front of HIC can guarantee the performance of low power users to cancel the serious interference caused by the high power users, while PIC in the rear of it can guarantee the performance of high power users to cancel the interference caused by the low power users.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.25-28
• /
• 2001

In this paper we implement moving picture transfer system using bluetooth Development Kit (DK). To reduce the size of the image data, we use M-JPEG compression. We use bluetooth Synchronous Connection-Oriented (SCO) link to transfer voice data. Server receive image data from camera and compress the image data in M-JPEG format, and then transmit the image data to client using bluetooth Asynchronous connection-less (ACL) link. Client receive image data from bluetooth ACL link and decode the compressed image and then display the image to screen. Sever and Client can transmit and receive voice data simultaneously using bluetooth SCO link. In this paper bluetooth HCI commands and events generated by host controller to return the results of HCI commands are explained and the flow of bluetooth connection procedure is presented.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.7
• /
• pp.17-26
• /
• 1999

In this paper, Bit selectable and Bi-directional Interface Device is described, which can communicate data with the peripheral devices. Specially, an algorithm of truth-table comparison that synthesizes the pulse-type sequential circuit pulse has been proposed to design the Interrupt Generator, and implemented in designing the Interrupt Register. Also, a description of the asynchronous design method is given to remove the clock skew phenomenon, and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.7ns.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.853-864
• /
• 2001

In this paper, system model is based on proposed standardization by 3GPP(Asynchronous IMT-2070 system), and we have analyzed the performance of the DS-CDMA/QPSK which cancelled self-interference, so that occurs when the received signal time is delay by multipath fading. We proposed the new scheme that designed for self-interference cancellation and the system performance is calculated in Rician fading and Rayleigh fading channel. The proposed rake receiver can be achieved a gain of about 1 [dB]∼6 [dB] more than generally rake receiver, and will be a very effective method to improve the performance of IMT-2000, and these data can be available for modem design of DS-CDMA.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.665-672
• /
• 2005

We present a novel pilot-aided channel estimation method for OFDM (Orthogonal Frequency Division Muitiplexing) system using WT(Wavelet transform) and interpolation. Due to excellent AWGN (Additive White Gaussian Noise) cancellation capability of n, pilot channels are estimated quite exactly and then, Dey are used in 2-degree polynomial interpolating the other remaining data symbol channels. The simulation results for Short WATM (Wireless Asynchronous Transfer Mode) channel show that the degradation in BER (Bit Error Ratio) performance of OFDM system iか this estimator is negligible compared to the case of perfect knowledge of CSI (Channel State Information).