• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.733-736
• /
• 1999

In this Paper, Bit selectable and Bi-directional Interface Port is described, which can communicate data with the peripheral devices. Specially A description of the asynchronous design method is given to remove the clock skew phenomenon and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.5㎱.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.105-113
• /
• 2004

This paper presents a design method for an asynchronous memory with a completion signal generation circuit meeting D-I model. The proposed design method is to generates a completion signal with dummy cell and a completion signal generation circuit to indicate completion of the required read or write operation to the processor. Dividing a memory exponentially to consider delay of a bit-line and a memory cell makes memory operates as a D-I model with minimum addition of redundant circuit. The proposed memory partitioning algorithm that divides entire memory into the several partitions with a exponentially increased size reduces the memory access delay by 40% compared with a conventional partitioning method to the same size.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.141-146
• /
• 2016

This paper presents a method to improve time interval error for asynchronous communication systems. The proposed method is designed and simulated with multi-phase VCO, interpolator, phase selector, up-down counter, comparator and adder. The simulation results for CAN communication system show that the maximum time interval error can be tightly managed for satisfying the required specification. The proposed frequency modulation method can be properly used for asynchronous communication systems requiring high reliability.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.61-74
• /
• 2002

This paper presents a method which synthesizes asynchronous circuits from free-choice Signal Transition Graphs (STGs) with timing constraints. The proposed method synthesizes asynchronous circuits by analyzing: the relations between signal transitions directly from the STGs without generating state graphs. The synthesis procedure decomposes a free-choice STG into deterministic STGs which do not have choice behavior. Then, a timing analysis extracts the timed concurrency and tamed causality relations between any two signal transitions for each deterministic STG. The synthesis procedure synthesizes circuits for each deterministic STG and synthesizes the final circuit by merging the circuits for each deterministic STG. The experimental results show that our method achieves significant reductions in synthesis time for the circuits which have a large state space, and generates circuits that have nearly the same area as compared to previous methods.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.709-720
• /
• 2006

In this paper, we suggest a simple and efficient multiple-forwarder-based file distribution method which can work with a tree-based application layer multicast. Existing multiple-forwarder approaches require high control overhead. The proposed method exploits the assumption that receivers join a session at different times. In tree-based application layer multicast, a set of data packets is delivered from its parent after a receiver has joined but before the next receiver joins without overlapping that of other receivers. The proposed method selects forwarders from among the preceding receivers and the forwarder forwards data packets from the non-overlapping data packet set. Three variations of forwarder selection algorithms are proposed. The impact of the proposed algorithms is evaluated using numerical analysis. A performance evaluation using PlanetLab, a global area overlay testbed, shows that the proposed method enhances throughput while maintaining the data packet duplication ratio and control overhead significantly lower than the existing method, Bullet.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.139-147
• /
• 2014

We address the problem of corrective control for two asynchronous sequential machines in parallel connection. Each asynchronous machine receives the same external input and shows independent state transition characteristics. We propose a novel control scheme in which only one corrective controller is employed so as to make the closed-loop system of each machine match the behavior of the corresponding reference model. Compared with the former method utilizing two corrective controllers, our scheme can reduce the controller size and computational load in controller design. We present the existence condition and design procedure for a state-feedback corrective controller under the assumption that the controlled machines are of input/state type. The design procedure for the proposed controller is described in an illustrative example.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.567-572
• /
• 2016

N-screen is an emerging technology to support multimedia multicasting, content sharing and content mobility. N-screen service providers should obtain the technology that provides the highest quality content seamlessly. Distributed nature of WiMedia distributed-MAC protocol can provide full mobility support, and achieves seamless medium access method in contrast to IEEE 802.15.3. So, in this paper, WiMedia distributed-MAC protocol is adopted and an asynchronous multicast transmission (AMT) technology is proposed to enhance performance of seamless N-screen wireless service based on distributed-MAC. The ACK frame transmissions are not required for multicast transmissions. By using this property in AMT, if a device is a multicast receiver, its reserved time slots can be reserved by the other devices with 1-hop distance. Furthermore, each N-screen device broadcasts and shares the information including an order in asynchronous traffic reservations to reduce conflicts in determining the transmission order of asynchronous N-screen packets. Therefore, AMT scheme expands the number of time slots available and throughputs for multicast and asynchronous traffic reservations when comparing with the distributed-MAC standard system. N-screen communications based on distributed-MAC with the proposed AMT shows a new framework for realizing N-screen wireless service with the full content mobility.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.82-87
• /
• 2001

In this paper we described the generation method of interface logic which can be replace between IP and IP handshaking signal with asynchronous logic circuit. Especially, we suggest the new \"Waveform Conversion Algorithm : Wave2VHDL\", if only mixed asynchronous timing waveform suggested which level type input and pulse type input for handshaking, we can convert waveform to flowchart and then replaced with VHDL code according to converted flowchart. Also, we assure that asynchronous electronic circuits for IP interface are generated by applying extracted VHDL source code from suggested algorithm to conventional domestic/abroad CAD Tool, and then we proved that coincidence simulation result and suggested timing diagram.g diagram.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.832-842
• /
• 2013

Cognitive Radio has attracted intensive interests of the researchers, recently. The data rate always increases in the emerging technologies. The increased data rate poses mainly two challenges for spectrum sensing. One is that the state of primary user (PU) is fast and alternatively varying between "on/off" in a spectrum sensing window. The other is that the asynchronicity among the reports in a cooperative spectrum sensing setting becomes more apparent. Both of them would deteriorate the spectrum sensing performance. Thus, we propose an asynchronous cooperative spectrum sensing method to cope with these two challenges. A likelihood ratio test based spectrum sensing is developed for a single cooperator. The likelihood ratio is obtained in the setting of fast varying PU state. The likelihood ratio test is uniformly powerful according to the Neyman-pearson lemma. Furthermore, the asynchronicity among the cooperators are studied. Two sets of fusion weights are discussed for the asynchronous time among cooperators. One is designed based on the condition probability of the PU state variation and the other one is designed based on the queueing theory. The simulation results are provided with different fusion methods. The performance improvements are demonstrated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.39-49
• /
• 2009

In this paper, we classify web-based social network into two types: open and community, and model user behavior in social activities. After that, we also propose the combination of instant messaging and web system as the method of support asynchronous/synchronous social activities. Furthermore, we introduce ImCoWeb prototype system that supports both asynchronous social activities (ex. social bookmark, comment, rate, and data share) and synchronous ones (ex. real-time communication, file transfer, co-browsing, and co-work). Because it is built on the existing instant messaging, it reduces costs by reusing the facilities such as session management, user management, and security of instant messaging.