• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2013

The concrete-filled tube column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. It suggests that pipe should be produced by welding two sides together where two shapes are joined after a channel is pre-welded onto the three sides in order to form an internal diaphragm. The upper diaphragm of the connection used the horizontal plate and the lower diaphragm used the Vertical plate. This research performed 6 monotonic tension experiments describing the connection upside and downside in order to evaluate the structural capability of the offered connection. And the cyclic loading experiment was performed about 2 T-Type column to beam connections. As to the experimental result edge cutting geometry, there was no big effect. An increase in the number of holes of the plate ultimate strength was increased by 5% and The thickness of the plate increases, the maximum strength was increased by 4%. T-Type connections until it reaches the plastic moment showed a stable behavior.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.2
• /
• pp.167-175
• /
• 2015

A retinal prosthesis is being developed for the restoration of vision in patients with retinitis pigmentosa (RP) and age-related macular degeneration (AMD). Determining optimal electrical stimulation parameters for the prosthesis is one of the most important elements for the development of a viable retinal prosthesis. Here, we investigated the effects of different charge-balanced biphasic pulses with regard to their effectiveness in evoking retinal ganglion cell (RGC) responses. Retinal degeneration (rd1) mice were used (n=17). From the ex-vivo retinal preparation, retinal patches were placed ganglion cell layer down onto an $8{\times}8$ multielectrode array (MEA) and RGC responses were recorded while applying electrical stimuli. For asymmetric pulses, 1st phase of the pulse is the same with symmetric pulse but the amplitude of 2nd phase of the pulse is less than $10{\mu}A$ and charge balanced condition is satisfied by lengthening the duration of the pulse. For intensities (or duration) modulation, duration (or amplitude) of the pulse was fixed to $500{\mu}s$($30{\mu}A$), changing the intensities (or duration) from 2 to $60{\mu}A$(60 to $1000{\mu}s$). RGCs were classified as response-positive when PSTH showed multiple (3~4) peaks within 400 ms post stimulus and the number of spikes was at least 30% more than that for the immediate pre-stimulus 400 ms period. RGC responses were well modulated both with anodic and cathodic phase-1st biphasic pulses. Cathodic phase-1st pulses produced significantly better modulation of RGC activity than anodic phase-1st pulses regardless of symmetry of the pulse.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.573-586
• /
• 2008

The improved performance and miniaturization of computer and the improvement of wireless communication technology have enabled the emergence of many high quality services. Among them multicast services are receiving much attention and their usage is increasing due to the increase of Internet multimedia services such as video conference, multimedia stream, internet TV, etc. Security plays an important role in mobile multicast services. In this paper, we proposed a secure multicast protocol for a hierarchical micro-mobility environment. The proposed secure multicast protocol provides security services such as authentication, access control, confidentiality and integrity using mechanisms including symmetric/asymmetric key crypto-algorithms and capabilities. To provide forward/backward secrecy and scalability, we used sub-group keys based on the hierarchical micro-mobility environment. With this security services, it is possible to guard against all kinds of security attacks performed by illegal mobile nodes. Attacks executed by internal nodes can be thwarted except those attacks which delete packet or cause network resources to be wasted. We used simulator to measure the performance of proposed protocol. As a result, the simulation showed that effect of these security mechanisms on the multicast protocol was not too high.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.597-604
• /
• 2016

A parallel algorithm of bi-conjugate gradient method was developed based on CUDA for parallel computation of the incompressible Navier-Stokes equations. The governing equations were discretized using splitting P2P1 finite element method. Asymmetric stenotic flow problem was solved to validate the proposed algorithm, and then the parallel performance of the GPU was examined by measuring the elapsed times. Further, the GPU performance for sparse matrix-vector multiplication was also investigated with a matrix of fluid-structure interaction problem. A kernel was generated to simultaneously compute the inner product of each row of sparse matrix and a vector. In addition, the kernel was optimized to improve the performance by using both parallel reduction and memory coalescing. In the kernel construction, the effect of warp on the parallel performance of the present CUDA was also examined. The present GPU computation was more than 7 times faster than the single CPU by double precision.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.75-84
• /
• 2014

Purpose - This article aims to examine whether the stock issuance of firms in the retail industry follows Myers' (1984) pecking order theory, which is based on information asymmetry. According to the pecking order model, firms have a sequence of financing decisions, of which the first choice is to use retained earnings, the second one is to get into safe debt, the next involves risky debt, and the last involves finance with outside equity. Since the 2000s, the polarization of the LEs (Large enterprises) and SMEs (Small and Medium Enterprises) arose in the retail industry. The LEs exhibited an improvement in growth and profitability, whereas SMEs had a tendency to degenerate. This study contributes to corroborating the features of financing decisions in the retail industry distinguished from the other industries. Research design, data, and methodology - This study considers the stocks listed on the KOSPI and KOSDAQ markets from 1991 to 2013, and is more concentrated on the stocks in the retail industry. The data were collected from the financial information company, WISEfn. The empirical analysis is conducted by employing two measures of net equity issues (and), which were introduced in Fama and French (2005), and can be calculated from firms' accounting information. All variables are generated as the aggregate value of the numerator divided by aggregate assets, which, in effect, treats the entire sample as a single firm. Substantially, the financing decisions of the firms were analyzed by examining how often and under what circumstances firms issue and repurchase equity. Then, this study compares the features of the retail industry with those of the other industries. Results - The proportion of sample firms that show annual net stock issues reaching the level of the year's average was 54.33% for the 1990s, and fell to 39.93% per year for the 2000s. In detail, the fraction of the small firms actually increases from 45.08% to 51.04%, whereas that of large firms shows a dramatic decline from 58.94% to 24.76%. Considering the fact that the large firms' rapid increase in growth after the 2000s may lead to an increase in equity issues, this result is rather surprising. Meanwhile, net stock repurchases of assets are considerably disproportionate between the large (-50.11%) and the small firms (-15.66%) for the 2000s. Conclusions - Stock issuance of retail firms is not in line with the traditional seasoned equity offering based on information asymmetry. The net stock issuance of the small firms in the retail industry can be interpreted as part of an effort to reorganize business and solicit new investment to resolve degenerating business performance. For large firms, on the other hand, the net repurchase can be regarded as part of an effort to rearrange business for efficiency and amplifying synergy across business sections through spin-off. These results can help the government establish a support policy on retail industry according to size.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.271-278
• /
• 2000

We have fabricated and analyzed the lasing characteristics of 1.3$\mu\textrm{m}$ Spot-Size-Converter (SSC) integrated Fabry-Perot (FP) laser diodes, which are very promising light sources for optical subscriber networks. SSC-LDs has been developed by BIB (buttjoint-built-in) coupling and selective MOVPE growth. High-performances were achieved such as the slope efficiency from the SSC facet of 0.23-0.32 mW/mA, the full-width at the half maximum of the far-field pattern (FFP) of 9.5$^{\circ}$~12.3$^{\circ}$, the alignment tolerances of $\pm$2.3$\mu\textrm{m}$ and $\pm$2.5$\mu\textrm{m}$ within the extra-coupling loss of 1 dB for the vertical and parallel directions, respectively. These experimental results were compared to theoretical ones in order to clarify the operational problems and give a good design direction of the fabricated SSC-LDs. It was revealed that an asymmetric output power from the facets, an irrelevancy of FFP and the waveguide structure around SSC facet region, and a poor temperature characteristics were originated from the scattering in the BIB and SSC sections and SHB effect in the active section for the first time.t time.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.33-37
• /
• 2004

Cu$_{0.1}$Fe$_{0.9}$Cr$_2$S$_4$ has been studied with Mossbauer spectroscopy, x-ray diffraction, vibrating sample magnetometer (VSM), and magnetoresistance (MR) measurement. The crystal structure was determined to be a cubic spinel with lattice parameter a$_{0}$=9.9880 $\AA$. The MR measurements show a semiconductor behavior below 110 K and metal behaved above 100 K. The temperature dependence of magnetization of Cu$_{0.1}$Fe$_{0.9}$Cr$_2$S$_4$ was reported. In addition to a large irreversibility between the zero-field-cooling (ZFC) and the field-cooling (FC) magnetization at applied field H=100 Oe, a cusp-like anomaly was observed in both the FC and ZFC curves. It shifted toward the lower temperature region with increasing magnetic field, and then showed convex type maximum at 110 K, under the applied field of 5 kOe. The Mossbauer spectra were measured from 15 K to room temperature. The asymmetric line broadening was observed for the sample Cu$_{0.1}$Fe$_{0.9}$Cr$_2$S$_4$, and it was considered to be dynamic Jahn-Teller relaxation. The charge state of Fe ions was ferrous in character. The unusual reduction of magnetic hyperfine field below 110 K was interpreted in terms of cancellation effect between the mutually opposite orbital current field (H$_{L}$) and Fermi contact field (H$_{C}$).

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.337-348
• /
• 2012

This study investigated the characteristics of bifurcation and the instability due to the initial imperfection of the space truss, which is sensitive to the initial conditions, and the calculated buckling load by the analysis of Eigen-values and the determinant of tangential stiffness. A two-free nodes model, a star dome, and a three-ring dome model were selected as case studies in order to examine the unstable phenomenon due to the sensitivity to Eigen mode, and the influence of the rise-span ratio and the load parameter on the buckling load were analyzed. The sensitivity to the imperfection of the two-free nodes model changed the critical path after reaching the limit point through the bifurcation mode, and the buckling load level was reduced by the increase in the amount of imperfection. The two sensitive buckling patterns for the model can be explained by investigating the displaced position of the free node, and the asymmetric Eigen mode was a major influence on the unstable behavior due to the initial imperfection. The sensitive mode was similar to the in-extensional mechanism basis of the simplified model. Since the rise-span ratio was higher, the effect of local buckling is more prominent than the global buckling in the star dome, and bifurcation on the equilibrium path occurring as the value of the load parameter was higher. Additionally, the buckling load levels of the star dome and the three-ring model were about 50-70% and 80-90% of the limit point, respectively.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.328-334
• /
• 2014

This study examined the effect of concentration polarization on permeate flux in forward osmosis (FO) membrane process for saline and sucrose solution. The reduction in permeate flux during the FO membrane process is largely due to the formation of concentration polarization on membrane surfaces. The flux reduction due to internal concentration polarization formed on the porous support layer was larger than that due to the external concentration polarization on the active membrane surface. Water permeate flux through the FO membrane increased nonlinearly with the increase in osmotic pressure. The water permeability coefficient was $1.8081{\times}10^{-7}m/s{\cdot}atm$ for draw solution on active layer (DS-AL) mode and $1.0957{\times}10^{-7}m/s{\cdot}atm$ for draw solution on support layer (DS-SL) mode in NaCl solution system. The corresponding membrane resistance was $5.5306{\times}10^6$ and $9.1266{\times}10^6s{\cdot}atm/m$, respectively. With respect to the sucrose solution, the permeate flux for DS-AL mode was 1.33~1.90 times higher than that for DS-SL mode. The corresponding variation in the permeation flux (J) due to osmotic pressure (${\pi}$) would be expressed as $J=-0.0177+0.4506{\pi}-0.0032{\pi}^2$ for the forward and $J=0.0948+0.3292{\pi}-0.0037{\pi}^2$ for the latter.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2005.11a
• /
• pp.64-65
• /
• 2005

Members of the Pumilio are the RNA binding proteins acting as translational repressors and required for germ cell development and asymmetric division. We identified chicken Pum1 and Pum2 that are similar to mouse and human in highly conserved C-terminal RNA-binding domain and eight tandem repeats. The comparative sequence analysis of Pum1 and Pum2 from fly, chicken, mouse and human shows high degree of evolutionary conservation in the homology of the peptide sequence and the structure of PUM-HD (Pumilio homology domain) with similar spacing between adjacent Pum repeats. Also, structures of chicken Pum1 and Pum2 genes are almost identical to those of mouse and human. We revealed that the expression levels of Pum1 and Pum2 were the highest in hatched female gonad among various embryonic tissues, and Pum2 expressed highly in 12-day and hatched gonad by real-time RT-PCR. These results suggest that Pum1 and Pum2 might have an effect on the development of chicken gonad.