• 한국산업보건학회지
• /
• 제30권3호
• /
• pp.299-305
• /
• 2020

Objectives: The most important occupational health activity is work environment measurement(WEM) along with the health examination. The preventive function of the WEM system could be achieved on the assumption that all subjected workplaces are performing correctly the WEM. To achieve properly the original purpose of WEM, we suggested a policy for subjected workplaces that they should register whether subjected or not. Methods: We made registration draft through reviewing laws, reports and thesis for WEM. And we conducted Focus Group Interview for industrial health experts using structured questionnaire about the registration. Results: There were 412 occupational deaths from 2013 to 2017. And it was found that only 130(31.6%) workplaces which involved in these occupational deaths had conducted the WEM. In order to operate the WEM system with effect, the subjected workplaces should register the subject status. Such registration must be completed at the stage of industrial accident insurance enrollment. Conclusions: Conducting WEM is the first step to prevent intoxication accident in workpalces. To operate properly WEM we should correctly understand subjected workplaces. So it is needed for all subjected workplaces to register whether they are subjected or not.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.7-10
• /
• 2011

The semi-arid and arid regions comprise almost 40 percent of the world's land surface. The low and erratic precipitation pattern is the single most significant contributor for limiting crop production in such regions where rainfall is the source for surface, soil and ground water. In a changing climate, the semi-arid and arid regions would increasingly face the challenge of water scarcity. According to the relevant literature; under the assumption of a doubling of the current atmospheric CO2 concentration, irrigation demand was estimated to increase for wheat and to decrease for second crop maize in a Mediterranean environment of Turkey in the 2070s. Crop evapotranspiration would decrease due to stomata closure. Reference evapotranspiration and potential soil evaporation were projected to increase by 8.0 and 7.3%, respectively, whereas actual soil evaporation was predicted to decrease by 16.5%. Drainage losses below 90 cm soil depth were found to decrease mainly due to lesser rainfall amount in the future.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.19-30
• /
• 2023

Steel-concrete composite slabs represent a very efficient floor solution combining the key performance of two different materials: the steel and the concrete. Composite slab response is governed by the degree of the interaction between these two materials, mainly depending by chemical and mechanical bond. The latter is characterized by a limited degree of confinement if compared with the one of the rebars in reinforced concrete members while the former is remarkably influenced by the type of concrete and the roughness of the profiled surface, frequently lubricated during the cold-forming manufacturing processes. Indeed, owing to the impossibility to guarantee a full interaction between the two materials, a key parameter governing slab design is represented by the horizontal shear-bond strength, which should be always experimentally estimated. According to EC4, the design of the slab bending resistance, is based on the simplified assumption that the decking sheet is totally yielded, i.e., always in plastic range, despite experimental and numerical researches demonstrate that a large part of the steel deck resists in elastic range when longitudinal shear collapse is achieved. In the paper, the limit strain for composite slab, which corresponds to the slip, i.e., the debonding between the two materials, has been appraised by means of a refined numerical method used for the simulation of experimental results obtained on 8 different composite slab types. In total, 71 specimens have been considered, differing for the properties of the materials, cross-section of the trapezoidal profiled metal sheets and specimen lengths.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.617-625
• /
• 2017

Prestress force identification (PFI) is crucial to maintain the safety of prestressed concrete bridges. A synergic identification method has been proposed recently by the authors that can determine the prestress force (PF) and the excitation force simultaneously in prestressed concrete beams with good accuracy. In this paper, the ability of this method in the application with prestressed concrete box-girder bridges is demonstrated. A reasonable assumption is made to capture the similarity of the dynamic behavior of the prestressed concrete box-girder bridge and a beam under a certain loading scenario, and the feasibility of this method for application in a prestressed box-girder bridge is affirmed. A comprehensive laboratory test program is conducted, and the effects of PF, excitation, measuring time and uncertainties are studied. Results show that the proposed method can predict the PF and the excitation force in a prestressed concrete box-girder accurately and has a great robustness against uncertainties.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.6-11
• /
• 2018

With the development of the Internet of Things technology, a system that ensures the self-adaptability of an environment that includes various IoT devices is attracting public attention. The rules for determining behavior rules in existing self-adaptation systems are based on the assumption of changes in system members and environment. However, in the IoT environment, flexibility is required to determine the behavior rules of various types of IoT devices that change in real time. In this paper, we propose a rule configuration in a self-adaptive system using SWRL based on OWL ontology. The self-adaptive system using the OWL - SWRL rule configuration has two advantages. The first is based on OWL ontology, so we can define the characteristics and behavior of various types of IoT devices as an integrated concept. The second is to define the concept of a rule as a specific language type, and to add, modify and delete a rule at any time as needed. Through the rule configuration in the adaptive system, we have shown that the rule defined in SWRL can provide flexibility and deeper concept expression function to adaptability to IoT environment.

• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.176-185
• /
• 2013

(Background)In modern industrial society, the design industry failed to observe the law of nature, destructing it. Regardless its intention, the design industry destructed the environment so that it can't maintain the future life because of waste and disaster. For the purpose, it is important to adopt the technology to reuse the waste resource generated by building or minimize the damage to environment for the resource that can't be recycled. (Methods)On the assumption that the material and resource can be an alternative plan for the design that can make environment be sustained, the study analyzed materials and resources out of superior office space of USA, which were selected by LEED Green Building Rating System. (Results)The analysis result revealed that all cases reused main structural part of existing building and indoor and various materials were reused or recycled. Especially, the materials without or with low amount of VOCs and formaldehyde were used. In order to reduce construction waste, the finish of existing building was exposed as it was, 50% of reused materials were used or disassemblable materials were used. When regional materials are used, there is an advantage to reduce transportation cost and recycle the materials rapidly. Lastly, the environment-friendly certified by FSC was used in all cases. (Conclusion)After all, the material is one of the space design strategies sensitive to environment so it is important to select good material. Harmless, environment-friendly materials applied to sustainable office space contribute to the creation of healthy environment. In addition, the use of recycled materials and reused materials to minimize waste is also essential factor for creating sustainable space.

• 한국대기환경학회지
• /
• 제27권3호
• /
• pp.255-271
• /
• 2011

ACE-Asia (Asian Pacific Regional Aerosol Characterization Experiment) in spring 2001 was a turning point to trigger international research interest on Asian dust (AD). This basically arose from the lack of research on AD, the important natural phenomenon to characterize the Northeast Asia. In contrast, health risk related to AD has been the primary concern in Korea. Although due in part to severe AD events of 2001~2002, research and mitigation measures on AD in Korea are typically based on the assumption that AD events are increasing in frequency and severity. However, contrary to the trend in Korea, the number of AD days and emission amounts of AD in China have decreased since 1980s. This paper reviews the impacts of AD on ambient air quality and variations in toxic substances during the AD event, reflecting the concern in Korea. While a great amount of dust particles flow into Korea during the AD event, a considerable amount of dust particles are locally generated as well. Since dust particles are mixed with toxic substances as they pass over polluted areas, the levels of toxic substances become lower in dust particles that do not pass over polluted areas. Broadening the research scope on AD is warranted to understand the AD as an important natural phenomenon, irrespective of its associated health risk.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.151-165
• /
• 2023

In this study, a simple method for the determination of the shear correction factor for composites beam with a rectangular cross section is presented. The plane stress elasticity assumption is used after simplifications of the expression of the stress distribution in the beam. The different fiber orientation angle and volume fraction are considered in this work. The studied structure is subjected to various loading type (thermal and hygrothermal). The numerical results obtained show that there is a dependence of the shear coefficient on the orientation of the fibers. The evolution of the shear correction factors depends not only on the orientation of the fibers and also on the volume fraction and the environment. the advantage of this developed formula of the shear correction factor is to obtain more precise results and to consider several parameters influencing this factor which are neglected if the latter is constant.

• 인간식물환경학회지
• /
• 제23권2호
• /
• pp.139-148
• /
• 2020

Urban problems raised by the concentration of population in urban areas have caused residents to migrate to other regions while causing other problems such as deteriorated infrastructure, traffic and environmental pollution problems in existing urban areas. As an alternative to improve this phenomenon, urban regeneration has emerged, and under the assumption that creating community vegetable gardens is effective in revitalizing cities considering their physical, social and cultural environment, frequency and descriptive analyses were conducted on the vegetable gardens in Jungnosong-dong, Wansan-gu, Jeonju-si, Jeollabuk-do, Korea to examine differences in the components of the surrounding environment and the settlement, and community spirit of the two groups comprised of 30 and 35 persons who did not and did participate in gardening respectively. Regression analysis were conducted to determine whether there were changes in community spirit after participating in gardening. As a component of the surrounding environment, gardening and fence management were found to be important for both the groups, and they seemed to have high satisfaction with their residence because they wanted to continue to live in their neighborhood. Overall, the satisfaction evaluation results showed that those who participated in gardening showed a higher satisfaction level than those who did not. Based on the changes in community spirit after participating in the activity, it was found that there was a high level of perception in all the components, indicating that the gardening had a positive effect on the cultivation of community spirit. As such, the spaces called vegetable gardens are not only for doing physical activities but also as shared conversation topics, and through the activities in the gardens, changes in the awareness of local residents can be brought about through the formation of social networks and natural communication between neighbors. It can be concluded that they encourage residents to actively participate in improving the urban environment through activities such as planting.

• 융합보안논문지
• /
• 제5권3호
• /
• pp.59-65
• /
• 2005

네트워크와 무선통신의 발달에 힘입어 유비쿼터스 시대가 도래하고 있다. 유비쿼터스 컴퓨팅에서의 시큐리티 문제는 인터넷 시대의 시큐리티 문제보다 복잡하며 공격이 용이하나 대책 수립은 현재로서는 굉장히 초보수준이다. 유비쿼터스 컴퓨팅 환경은 기존의 보안 기술로 적용하기에는 많은 다른점을 가지고 있다. Confidence level이 서로 다른 인증 방식이 필요하거나 또한 사용자의 위치에 대한 프라이버시도 만족해야 하는 인증 방식이 필요하다. 기존의 대표적인 인증 방식인 kerberos 인증 방식은 사용 범위가 지정 워크스테이션으로 국한되거나 클라이언트의 안전한 환경을 가정하여 이용되지만 유비쿼터스 컴퓨팅 환경에서는 이러한 조건을 제공하기가 어렵기 때문에 새로운 보안메커니즘이 필요하다. 또한 유비쿼터스 컴퓨팅 환경은 무선전송이나 이동통신에 크게 의존하게 되므로 이들 통신 구간에 대한 보안이 중요한 문제로 대두되고 있다. 이에 본 논문에서는 무선 인증서를 이용하여 사용자 인증 및 기밀성 제공을 위한 유비쿼터스 환경의 SSL을 적용 방안을 연구하여 실험을 통하여 결과를 증명하고자 한다. 즉, 유비쿼터스 환경에서 기밀성 및 인증을 제공하는 기법을 제안한다.