• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.133-146
• /
• 2016

To engage multiple missiles in single launcher against multiple targets, launcher system has to operate for optimized launch angle to each target sequentially. If the launch angle sequence is simply defined according to the target assignment order only, overall engagement time would be increased, and even in some engagement scenarios, it could be possible to miss some moving targets being out of proper engagement area. Therefore, the study on methodology for a real-time decision of optimized launch angle sequence is necessary. In this paper, the automatic decision model of launch angle sequence was suggested to minimize total engagement time by analyzing the simulation results of all engagement sequence set for multiple moving target scenario. Performance of proposed methodology for decision of optimal launch angle sequence was verified by comparing with the optimal or suboptimal sequence obtained from simulation results.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.121-128
• /
• 2015

This study aimed to investigate the effects of an unplugged robot education system capable of computerless coding education. Specifically, this study compared this education system with PicoCricket, an educational robot that can also be used with elementary students in lower grades, using assessment tools on perceived usefulness and ease. Using random sampling and randomized assignment for more objective validation, 30 participants were assigned to the unplugged robot education system group (experimental group) and 30 participants were assigned to the PicoCricket group (control group), for a total of 60 study participants. The research procedure included verification of the equivalence of the two groups by conducting a pretest after a 2-hour basic training session on algorithms and programming. The experimental and control groups learned the same content using different educational tools in accordance with software training guidelines for a total of 12 hours. Then, the difference in perceived usefulness and ease between the two groups was examined using a post-treatment test. The study results showed that scores on both dependent variables, perceived usefulness and perceived ease, were significantly higher in the experimental group than the control group. Moreover, scores on all sub-variables of the dependent variables were significantly higher in the experimental group than the control group. These results suggest that learners using the unplugged robot education system found it more useful and easier to use than learners using the existing educational robot, PicoCricket. This study's findings are significant, as according to the technology acceptance model, the perceived usefulness and ease of an educational tool are important variables that determine the acceptance of the tool (i.e., persistence of learning).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.83-91
• /
• 2008

IISO/IEC 9594-8 defines the public key framework and attribute certificate framework. Attribute certificate framework deals with privilege management infrastructure(PMI). In PMI, for privilege management using attribute certificates, role assignment certificates and role specification certificates are used to assign and specify privileges independently. Role specification certificates includes privilege specifications and the details far privilege management of network environments. Privilege management of unreliable network environment tries to enhance the reliability and efficiency of privilege information transmission forwarding over unreliable routes in the presence of potentially faulty nodes and edges. Each node forms a role specification tree based on role specification relationship data collected from the network. In this paper privilege management cost with the role specification certificates tree structure is evaluated trying to reduce the overhead incurred by role creation and modification of privileges. The multicasting of packets are used for scalability. We establish management cost model taking into account the packet loss and node reliability which continuously join and leave for network. We present quantitative results which demonstrate the effectiveness of the proposed privilege management scheme.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.93-103
• /
• 2005

As the usage of XML documents increases the requirement of security for XML documents is growing. Especially it is very important to solve the problem of access control to XML object which shares in the environment where various users connect to each others. In this paper, we propose the access control model and mechanism which is combined with role hierarchy in the RBAC and hierarchical key derivation/assign method for the access to XML object. So we implement the access control mechanism by including hierarchical key derivation method. The technique, we proposed, gives not only the benefit in management which RBAC provides in access control to XML objects, but also it ran help derive a lower layer key from the higher layer user's. This feature decrease the number of keys managed in each role hierarchy in comparison with previous methods.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.534-540
• /
• 2020

Like most developed countries, South Korea is experiencing a severe lack of seafarers. Because young people's demands for a high quality of life has led them to seek shore-based careers. The wage difference between seafaring and shore-based careers has been decreasing gradually, however South Korea's unique Boarding Service Reserve System Policy has helped recruit and retain young sailors and, since 2017, the government has focused on creating new jobs and stabilizing the status of irregular workers in both private and public sectors. It specifically established the Economic, Social & Labor Council to carefully analyze seafarers' employment stability, which previously had been overlooked in the country. This research used the Binary Logit Model (BLM) to analyze the determinants of seafarers' employment stability in both permanent and non-permanent positions. We found that seafarers' employment stability correlated highly with their education level. This means that seafarers who graduated from the above mentioned two maritime universities would have more job stablity than those who graduated from maritime high schools or general universities. Other independent variables, such as the shipping company, vessel, hip management companies, work assignment, rank, and license had no significant impact on employment stability.

• Journal of Korean Society for Quality Management
• /
• v.50 no.2
• /
• pp.265-286
• /
• 2022

Purpose: The time and cost of a project activity exists in a selected mode and there is a quality level for the selected mode, and the time and cost of the current activity is determined by the quality level of the preceding activity. When an activity is a predecessor activity of an activity, it is characterized as a trade-off problem in which the time and cost of the activity are determined according to the quality level of the activity. Methods: A neighbor search heuristic algorithm obtains a solution by (1) randomly determining the mode, quality level, and assignment order for each activity. (2) get a solution by improving the solution by changing the possible modes and quality levels; (3) to find a solution by improving the solution from the point where it is feasible to advance the start time. Here, Case[1] is a method to find the optimal solution value after repeating (1). Case [2] is a method for finding a solution including (1) and (2). Case [3] refers to a method for finding solutions including (1), (2), and (3). Results: It can be seen that the value of the objective function presented by the algorithm changes depending on how the model of the heuristic algorithm is designed and applied. In other words, it suggests the importance of algorithm design and proves the importance of the quality problem of activities in the project schedule. Conclusion: A study significance of the optimization algorithm and the heuristic algorithm was applied to the effect of the quality of the preceding activity on the duration and cost of itself and the succeeding activity, which was not addressed in the project schedule problem.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.51-63
• /
• 2000

Dynamic traffic assignment(DTA) has been a topic of substantial research during the past decade. While DTA is gradually maturing, many aspects of DTA still need improvement, especially regarding its formulation and solution algerian Recently, with its promise for In(Intelligent Transportation System) and GIS(Geographic Information System) applications, DTA have received increasing attention. This potential also implies higher requirement for DTA modeling, especially regarding its solution efficiency for real-time implementation. But DTA have many mathematical difficulties in searching process due to the complexity of spatial and temporal variables. Although many solution algorithms have been studied, conventional methods cannot iud the solution in case that objective function or constraints is not convex. In this paper, the genetic algorithm to find the solution of DTA is applied and the Merchant-Nemhauser model is used as DTA model because it has a nonconvex constraint set. To handle the nonconvex constraint set the GENOCOP III system which is a kind of the genetic algorithm is used in this study. Results for the sample network have been compared with the results of conventional method.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.531-548
• /
• 2015

Atmospheric Motion Vector (AMV) from satellite images have shown Slow Speed Bias (SSB) in comparison with rawinsonde. The causes of SSB are originated from tracking, selection, and height assignment error, which is known to be the leading error. However, recent works have shown that height assignment error cannot be fully explained the cause of SSB. This paper attempts a new approach to examine the possibility of SSB reduction of COMS AMV by using a new target tracking algorithm. Tracking error can be caused by averaging of various wind patterns within a target and changing of cloud shape in searching process over time. To overcome this problem, Gaussian Mixture Model (GMM) has been adopted to extract the coldest cluster as target since the shape of such target is less subject to transformation. Then, an image filtering scheme is applied to weigh more on the selected coldest pixels than the other, which makes it easy to track the target. When AMV derived from our algorithm with sum of squared distance method and current COMS are compared with rawindsonde, our products show noticeable improvement over COMS products in mean wind speed by an increase of $2.7ms^{-1}$ and SSB reduction by 29%. However, the statistics regarding the bias show negative impact for mid/low level with our algorithm, and the number of vectors are reduced by 40% relative to COMS. Therefore, further study is required to improve accuracy for mid/low level winds and increase the number of AMV vectors.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.213-230
• /
• 2008

The aim of this study was to analyze the initial movement and the stress distribution of each tooth and periodontal ligament during the lingual lever-arm retraction of 6 maxillary incisors using FEA. Two kinds of finite element models were produced: 2-properties model (simple model) and 24-properties model (multi model) according to the material property assignment. The subject was an adult male of 23 years old. The DICOM images through the CT of the patient were converted into the 3D image model of a skull using the Mimics (version 10.11, Materialise's interactive Medical Image Control System, Materialise, Belgium). After series of calculating, remeshing, exporting, importing process and volume mesh process was performed, FEA models were produced. FEA models are consisted of maxilla, maxillary central incisor, lateral incisor, canine, periodontal ligaments and lingual traction arm. The boundary conditions fixed the movements of posterior, sagittal and upper part of the model to the directions of X, Y, Z axis respectively. The model was set to be symmetrical to X axis. Through the center of resistance of maxilla complex, a retraction force of 200g was applied horizontally to the occlusal plane. Under this conditions, the initial movements and stress distributions were evaluated by 3D FEA. In the result, the amount of posterior movement was larger in the multi model than in the simple model as well as the amount of vertically rotation. The pattern of the posterior movement in the central incisors and lateral incisors was controlled tipping movement, and the amount was larger than in the canine. But the amount of root movement of the canine was larger than others. The incisor rotated downwardly and the canines upwardly around contact points of lateral incisor and canine in the both models. The values of stress are similar in the both simple and multi model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2267-2275
• /
• 2013

Existing conventional model for analysis of shallow water flow just assumed the internal boundary condition as free-slip, which resulted in the wrong prediction about the velocity, vorticity, water level, shear stress distribution, and time variation of drag and lift force around a structure. In this study, a finite element model that can predict flow characteristics around the structure accurately was developed and internal boundary conditions were generalized as partial slip condition using slip length concept. Laminar flow characteristics behind circular cylinder were analyzed by varying the internal boundary conditions. The simulation results of (1) time variations of longitudinal and transverse velocities, and vorticity; (2) wake length; (3) vortex shedding phenomena by slip length; (4) and mass conservation showed that the vortex shedding had never observed and laminar flow like creeping motion was occurred under free-slip condition. Assignment of partial slip condition changed the velocity distribution on the cylinder surface and influenced the magnitude of the shear stress and the occurrence of vorticity so that the period of vortex shedding was reduced compared with the case of no slip condition. The maximum mass conservation error occurred in the case of no slip condition, which had the value of 0.73%, and there was 0.21 % reduction in the maximum mass conservation error by changing the internal boundary condition from no slip to partial slip condition.