• Korea and Global Affairs
• /
• v.1 no.1
• /
• pp.31-70
• /
• 2017

On December 9, 2016, the decision of impeachment of the National Assembly decided against Park Geun-hye came from the nomination conflicts of the 20th general election between Pro-Park group and Anti-Park group at the ruling Saenuri Party. Therefore, this study focused on the nomination conflicts of the ruling party and the opposition party on the election results in the 20th general election on the public sentiment of the people. The nomination conflicts of the ruling and opposite parties were a prelude to the victory of the 19th presidential election, and it was serious faction conflict. Firstly, the study examined how the nomination conflicts of each party were centered on President Park Geun-hye as well as the leaders of each party and the chairman of the nomination committee. Secondly, the study examined what kind of changes would be made to the composition of presidential candidates for each party at the time of the presidential election. Thirdly, the study examined the opposition parties' separation between the Minjoo Party of Korea and the People's Party of Korea before and after the election and the issue of initiative in Honam. As a result of the analysis, the 20th general election failed to obtain a majority seat of the ruling Saenuri Party, and the opposition won and formed the majority. The reason why President Park and Saenuri were greatly defeated in the contest even in the situation where the opposition parties were divided is the root cause in the attitude of Pro-Park group and Anti-Park group who assumed their victory. Therefore, it is highly possible to render its responsibility to President Park Geun-hye, who has become a 'past power', and it has opened up the possibility that the emergence of future power by opposition parties. In the case of the opposition party, it is clear that the battle for Honam, which is a traditional opposition party's support group, is a matter of good fortune of the two major powers, Moon Jae In and Ahn Cheol Soo.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.138-149
• /
• 2008

Rapid accumulation of carbon dioxide in the atmosphere for the past century leads to acidify the surface ocean and contributes to the global warming as it forms acid in the ocean and it is a green house gas. In order to curb the green house gas emissions, in particular carbon dioxide, various multilateral agreements and programs have been established including UN Convention of Climate Change and its Kyoto Protocol for the last decades. Also a number of geo-engineering projects to manipulate the radiation balance of the earth have been proposed both from the science and industrial community worldwide. One of them is ocean fertilization to sequester carbon dioxide from the atmosphere through the photosynthesis of phytoplankton in the sea. Deliberate fertilization of the ocean with iron or nitrogen to large areas of the ocean has been proposed by commercial sector recently. Unfortunately the environmental consequences of the large scale ocean iron fertilization are not known and the current scientific information is still not sufcient to predict. In 2007, the joint meeting of parties of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, 1972 and 1996 Protocol (London Convention/Protocol) has started considering the purposes and circumstances of proposed large-scale ocean iron fertilization operations and examined whether these activities are compatible with the aims of the Convention and Protocol and explore the need, and the potential mechanisms for regulation of such operations. The aim of this paper is to review the current development on the commercial ocean fertilization activities and management regimes in the potential ocean fertilization activities in the territorial sea, exclusive economic zone, and high seas, respectively, and further to have a view on the emerging international management regime to be London Convention/Protocol in conjunction with a support from the United Nations General Assembly through The United Nations Open-ended Informal Consultative Process on Oceans and the Law of the Sea.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.173-178
• /
• 2010

A privately held, third generation family owned company, Boom Technologies, Inc. (BTI), a provider of products and services to the electric utility, telecommunications and contractor markets, continues to make progress in exporting. Although export sales only equaled 5% of total revenue in 2008, BTI has an entire export division. Their export division's Managing Director reveals the trial and errors of a privately held company and their quest for success overseas. From its inception, BTI has always believed its greatest asset is its employees. When export sales struggled due to lack of strategy and direction, BTI hired a Managing Director for its export division. With leadership and guidance from BTI's president and from the Managing Director, they utilized the department's skills and knowledge. Structural changes were made to expand their market presence abroad and increase export sales. As a result, export sales increased four-fold, area managers in new countries were added and distribution networks were successfully cultivated. At times, revenue generation was difficult to determine due to the structure of the company. Therefore, in 1996, the export division was restructured as a limited liability company. This allowed the company to improve the tracking of revenue and expenses. Originally, 80% of BTI's export sales came from two countries; therefore, the initial approach to selling overseas was not reaching their anticipated goals of expanding their foreign market presence. However, changes were made and now the company manages the details of selling to over 80 countries. There were three major export expansion challenges noted by the Managing Director: 1. Product and Shipping - The major obstacle for BTI was product assembly. Originally, the majority of the product was assembled in the United States, which increased shipping and packaging costs. With so many parts specified in the order, many times the order would arrive with parts missing. The missing parts could equate to tens of thousands of dollars. Shipping these missing parts separately in another shipment also cost tens of thousands of dollar, plus a delivery delay time of six to eight weeks; all of which came out of the BTI's pockets. 2. Product Adaptation - Safety and product standards varied widely for each of the 80 countries to which BTI exported. Weights, special licenses, product specification requirements, measurement systems, and truck stability can all differ from country to country and can serve as a type of barrier to entry, making it difficult to adapt products accordingly. Technical and safety standards are barriers that serve as a type of protection for the local industry and can stand in the way of successfully pursuing foreign markets. 3. Marketing Challenges - The importance of distribution creates many challenges for BTI as they attempt to determine how each country prefers to operate with regard to their distribution systems. Some countries have competition from a small competitor that only produces one competing product; whereas BTI manufactures over 100 products. Marketing material is another concern for BTI as they attempt to push marketing costs to the distributors. Adapting the marketing material can be costly in terms of translation and cultural differences. In addition, the size of paper in the United States differs from those in some countries, causing many problems when attempting to copy the same layout and With distribution being one of several challenges for BTI, the company claims their distribution network is one of their competitive advantages, as the location and names of their distributors are not revealed. In addition, BTI rotates two offerings yearly: training to their distributors one year and then the next is a distributor's meeting. With a focus on product and shipping, product adaptation, and marketing challenges, the intricacies of selling overseas takes time and patience. Another competitive advantage noted is BTI's cradle to grave strategy, where they follow the product from sale to its final resting place, whether the truck is leased or purchased new or used. They also offer service and maintenance plans with a detailed cost analysis provided to the company prior to purchasing or leasing the product. Expanding abroad will always create challenges for a company. As the Managing Director stated, "If you don't have patience (in the export business), you better do something else." Knowing how to adapt quickly provides BTI with the skills necessary to adjust to the changing needs of each country and its own unique challenges, allowing them to remain competitive.

• Asia pacific journal of information systems
• /
• v.21 no.3
• /
• pp.71-96
• /
• 2011

Within the traditional medical delivery system, patients residing in medically vulnerable areas, those with body movement difficulties, and nursing facility residents have had limited access to good healthcare services. However, Information and Communication Technology (ICT) provides us with a convenient and useful means of overcoming distance and time constraints. ICT is integrated with biomedical science and technology in a way that offers a new high-quality medical service. As a result, rapid technological advancement is expected to play a pivotal role bringing about innovation in a wide range of medical service areas, such as medical management, testing, diagnosis, and treatment; offering new and improved healthcare services; and effecting dramatic changes in current medical services. The increase in aging population and chronic diseases has caused an increase in medical expenses. In response to the increasing demand for efficient healthcare services, a telehealth service based on ICT is being emphasized on a global level. Telehealth services have been implemented especially in pilot projects and system development and technological research. With the service about to be implemented in earnest, it is necessary to study its overall acceptance by consumers, which is expected to contribute to the development and activation of a variety of services. In this sense, the study aims at positively examining the structural relationship among the acceptance factors for telehealth services based on the Technology Acceptance Model (TAM). Data were collected by showing audiovisual material on telehealth services to online panels and requesting them to respond to a structured questionnaire sheet, which is known as the information acceleration method. Among the 1,165 adult respondents, 608 valid samples were finally chosen, while the remaining were excluded because of incomplete answers or allotted time overrun. In order to test the reliability and validity of the assessment scale items, we carried out reliability and factor analyses, and in order to explore the causal relation among potential variables, we conducted a structural equation modeling analysis using AMOS 7.0 and SPSS 17.0. The research outcomes are as follows. First, service quality, innovativeness of medical technology, and social influence were shown to affect perceived ease of use and perceived usefulness of the telehealth service, which was statistically significant, and the two factors had a positive impact on willingness to accept the telehealth service. In addition, social influence had a direct, significant effect on intention to use, which is paralleled by the TAM used in previous research on technology acceptance. This shows that the research model proposed in the study effectively explains the acceptance of the telehealth service. Second, the research model reveals that information privacy concerns had a insignificant impact on perceived ease of use of the telehealth service. From this, it can be gathered that the concerns over information protection and security are reduced further due to advancements in information technology compared to the initial period in the information technology industry, and thus the improvement in quality of medical services appeared to ensure that information privacy concerns did not act as a prohibiting factor in the acceptance of the telehealth service. Thus, if other factors have an enormous impact on ease of use and usefulness, concerns over these results in the initial period of technology acceptance may become irrelevant. However, it is clear that users' information privacy concerns, as other studies have revealed, is a major factor affecting technology acceptance. Thus, caution must be exercised while interpreting the result, and further study is required on the issue. Numerous information technologies with outstanding performance and innovativeness often attract few consumers. A revised bill for those urgently in need of telehealth services is about to be approved in the national assembly. As telemedicine is implemented between doctors and patients, a wide range of systems that will improve the quality of healthcare services will be designed. In this sense, the study on the consumer acceptance of telehealth services is meaningful and offers strong academic evidence. Based on the implications, it can be expected to contribute to the activation of telehealth services. Further study is needed to assess the acceptance factors for telehealth services, such as motivation to remain healthy, health care involvement, knowledge on health, and control of health-related behavior, in order to develop unique services according to the categorization of customers based on health factors. In addition, further study may focus on various theoretical cognitive behavior models other than the TAM, such as the health belief model.

• Journal of Hospice and Palliative Care
• /
• v.14 no.1
• /
• pp.8-19
• /
• 2011

Purpose: This study identifies research trends and provides fundamental data related to curative power of aromatherapy to relieve pain in Korea. Methods: The study analyzed 44 experimental studies on humans that were published in Korea before the end of December, 2009. The key words used for searching were: aroma, aromatherapy, hyang-yobeob, hyanggi-yobeob, hyanggichilyo, aromatherapy and pain, headache, scapulodynia, omodynia, feeling uncomfortable in the perineal region, sense of pain, labor pains, arm pain, menstrual pain, aches, and dysmenorrheal. Those words were found on websites, including those for Korea Education & Research Information Service, the National Assembly Library, KISS, KoreaMed, and NDSL. Collected data were analyzed using descriptive statistics. Results: The results showed that most of essential oils to relieve pain is composed of three to four kinds of oils, including Lavender, Roman chamomile, Rosemary, and Clarysage. Aromatherapy is applied usually by means of massage (50%), inhalation (13.6%), or a combination of the above two (13.6%). Measuring instruments as a dependent variable include VAS, questionnaire, GRS, blood pressure, pulse, and Algometer. Aromatherapy plays an important role in soothing headaches and arthralgia. However, when it comes to labor and menstrual pain, it doesn't seem to be effective. Conclusion: The study found that different kinds of oil, frequencies, and periods of time are used for the same symptoms. Further research should employ standardized oil blending, application, duration, and measuring instruments, and more systematically analyze the effects of aromatherapy to establish the effects on relieving pain.

• Korean Journal of Poultry Science
• /
• v.41 no.4
• /
• pp.287-296
• /
• 2014

Chicken eggs undergo various physiological changes during egg maturation. To study genes associated with the egg maturation in pre-ovulation (immature) and post-ovulation (mature), we compared gene expression patterns between in the immature egg and mature egg using RNA sequencing data. Mature and immature eggs were obtained from a Heuksaek Jaerae-jong of Korean native chicken. Total RNAs obtained from the eggs were sequenced by Illumina HiSeq 2000 platform, and the generated sequence reads were mapped to Galgal4 reference sequence assembly using Tuxedo Protocol. From the comparison of the RNA sequencing data, 315 genes were differentially expressed between mature and immature eggs, and 46 genes were only detected in immature egg. Further gene ontology (GO) analysis was performed for the differentially expressed genes using DAVID, showing that 29 and 28 GO terms were independently clustered from mature and immature, respectively. From those clustered GO terms, genes related to germ cell development, sex differentiation and defense response to bacterium were mainly expressed in the immature egg, while genes related to regulation of apoptosis, steroid metabolic process and lipid homeostasis were mainly detected in the mature egg. Our results could contribute to understand egg maturation before and after ovulation, and develop genetic markers for improving egg quality and productivity.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.95-103
• /
• 1994

The safety related components in the nuclear power plant should be designed to withstand the seismic load. Among these components the integrity of reactor internals under earthquake load is important in stand points of safety and economics, because these are classified to Seismic Class I components. So far the modelling methods of reactor internals have been investigated by many authors. In this paper, the dynamic behaviour of reactor internals of Yong Gwang 1&2 nuclear power plants under SSE(Safe Shutdown Earthquake) load is analyzed by using of the simpled Global Beam Model. For this, as a first step, the characteristic analysis of reactor internal components are performed by using of the finite element code ANSYS. And the Global Beam Model for reactor internals which includes beam elements, nonlinear impact springs which have gaps in upper and lower positions, and hydrodynamical couplings which simulate the fluid-filled cylinders of reactor vessel and core barrel structures is established. And for the exciting external force the response spectrum which is applied to reactor support is converted to the time history input. With this excitation and the model the dynamic behaviour of reactor internals is obtained. As the results, the structural integrity of reactor internal components under seismic excitation is verified and the input for the detailed duel assembly series model could be obtained. And the simplicity and effectiveness of Global Beam Model and the economics of the explicit Runge-Kutta-Gills algorithm in impact problem of high frequency interface components are confirmed.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.

• The Korean Journal of Archival Studies
• /
• no.23
• /
• pp.141-178
• /
• 2010

The Administration of Labor was responsible for the technical and practical functions like policy-making of labor matters and implementing the relevant laws. However, there has been a few record transferred to the National Archives to help find out the labor policy-making process. This is one of the typical examples that shows the discontinuity and unbalance, and disorderly filing of the administrative records in Korea. Naturally it is almost impossible to retrieve the appropriate content through the records file-name. Users should be at the trouble to compare the record items and their content one by one. For the re-organization of the Administration of Labor' records, this research suggests the four-level analysis of functions of the Administration. The Administration of Labor' survived records could be linked to each level function. And the publication of the 'Records Abstract Catalog' providing users with more information about the records would pave the way for easier access to the records. In addition, it also suggests the logical re-filing of the survived records of which we cannot find the order or sequence. This re-organization of the survived records would help to establish the acquisition and appraisal policy of the labor records as well as the new way of description and finding tool hereafter. Drawing up labor history map is a starting point for the acquisition strategy of the labor records, which could allow users to gain systematic access on the survived records. Of course, extensive investigation and research on the survived records is a prerequisite for the map. It would be required to research on the survived records of the other government agencies, including economic-social area ministries and investigation agencies and the National Assembly as well. It is also needed to arrange and typify the significant incidents and activities on thematic and periodic frames in the labor history. If possible to understand or connect the survived records and these accomplishments comprehensively, it would be of great help for the acquisition of the labor records and the related oral records projects.

• Journal of Christian Education in Korea
• /
• v.71
• /
• pp.181-210
• /
• 2022

The purpose of this study was to investigate the research trends related to the children's department of church schools. The purpose of this study is to present basic data for the study of the children's department of church schools by analyzing the research period, research contents, research methods, and subjects of research related to the children's department of church schools. For this study, 50 domestic master's and doctoral dissertations searched through the National Assembly Library and the Research Information Sharing Service(RISS) were extracted with the keywords of 'church school' and 'children's department'. The frequency and percentage were calculated by analyzing the research related to the children's department of the church school according to four criteria: research period, research content, research method, and research subject. As a result of the study, first, the research trend of research papers in the children's department of church schools was found to be 49 articles (98%) for master's degrees and 1 article (2%) for doctoral degrees from 1980 to 2022. Trends by research period are focused on master's degrees. Second, the trend by research content was 27 practical studies (54%) and 23 theory studies (46%). In the research related to the children's department of church schools, the practical research accounted for a relatively high percentage compared to the theory research. Third, the trends by research method were in the order of 30 literature studies (60%), 19 quantitative studies (38%), and 1 qualitative study (2%). Research related to children's departments in church schools is being actively conducted with a focus on literature research. Fourth, as for the trends by study subject, the study was conducted focusing on physical subjects, with 35 subjects (70%) and 15 subjects (30%) of personal subjects. As research is conducted from physical objects to church schools and media, it is necessary to study the connection between church schools and families. As the research on church school kindergarten is focused on adults (teachers, parents, and educational preachers), in-depth research on children in church schools and qualitative research with voices from the field of children's department in church schools are required.