• Korean Security Journal
• /
• no.60
• /
• pp.113-135
• /
• 2019

Despite being one of the most important national facilities, the National Assembly building of the Republic of Korea has become increasingly vulnerable to potential terrorist attacks, and the instances of demonstrations occurring around and banned items taken into the building are continuing to rise. In addition, promoting the idea of "open assembly" has led to increased visitors and weakened access control. Furthermore, while there is a significant symbolic value attached to attacking the National Assembly building, the level of security management is relatively very low, making it a suitable target for terrorism. In order to address such vulnerability, an appropriate access control system should be in place from the areas surrounding the building. However, the National Assembly Security Service which oversees security around the building is scheduled to disband in June 2020 following the abolition of the conscripted police force in 2023. Therefore, there needs to be an alternative option to bolster the security system outside the facility. In this research, the perceptions of 114 government officials in charge of security at the National Assembly Secretariat toward the protection and security system of the areas surrounding the National Assembly building were examined. Results showed that the respondents believed it was highly likely that risky situations could occur outside the building, and the use of advanced technologies such as intelligent video surveillance, intrusion detection system, and drones was viewed favorably. Moreover, a mid- to long-term plan of establishing a unified three-layer protection system and designating a department in charge of the security outside the building were perceived positively. Lastly, the participants supported the idea of employing private police to replace the National Assembly Security Service for the short term and introducing parliamentary police for the mid- to long-term.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.243-244
• /
• 2016

The assembly of the modular housing is an important phase in the construction of pre-fabricated houses. However, the assembly tools that are commonly used in a work site have a disadvantage of decreasing the productivity and the quality. We have developed a exclusive tool for assembling modular parts. The structural stability of the developed tool has been verified in the previous studies. However, the experimental analysis was not conducted. This study analyzed the effect of improving the productivity and quality of the developed assembly tool. The result of the experimental analysis shows improvements in productivity and quality compared to the conventional assembly tool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.64-68
• /
• 2004

Design of manufacturing system is a very complicated and tricky process. Since no efficient method has been known, yet it has been mainly done based on experience and heuristics. Even mostly used simulation approaches can only evaluate the performance of an already configured system, but cannot provide a help to configure or reconfigure a manufacturing system. An efficient way to (re-)configure manufacturing systems might be to use building blocks of a manufacturing system in the similar manner the recent products are configured based on modular principle. In this paper, the concept of a building block and its representation method are described. An example of assembly system configuration is also given.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.9-13
• /
• 2009

Recently, construction in downtown is often done closely at the adjacent building. In this case, underground construction need to Basement Composite Wall(BCW) construction. However, generally, during the construction process of BCW form works have many problems that are narrow working space and inefficient time consuming. Despite of these problems, there was no quantitative research for the work time of BCM assembly. Therefore, in this study, work time of CBW form assembly in underground construction is identified by the work analysis. The results of this study reveal that buttress work of basement form take lots of time in the entire work process of Basement Composite Wall form assembly.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.8.1-8.1
• /
• 2009

The self-assembly of peptide-based building blocks into nanostructures is an attractive route for fabricating novel materials because of their capacity for molecular recognition and functional flexibility as well as the mild conditions required in the fabrication process. Among various peptide-based building blocks forming nanostructures, the simplest building blocks are aromatic dipeptides like diphenylalanine, which can readily self-assemble into nanotubes in aqueous solutions at ambient conditions. Recently, we have developed a high-temperature solid-phase self-assembly process for diphenylalanine. Through this novel process, we succeeded in the growth of vertically well-aligned, uniform nanowires from amorphous peptide thin film. To demonstrate the versatility of our approach, we also fabricated a micropattern of peptide nanowires by combining our solid-phase growth method and simple soft lithographic techniques. We believe that our studies on peptide self-assembly will provide a new horizon for peptide-based nanofabrication.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.173-173
• /
• 2006

We have explored a strategy to control the supramolecular nano-structures self-assembled from rigid segments through attachment of flexible chains through microphase separation and anisotropic arrangement. Supramolecular structures formed by self-assembly of rigid building blocks can be precisely controlled from 1-D layered, 3-D bicontinuous cubic to 2-D cylindrical structures by systematic variation of the type and relative length of the respective blocks. Furthermore, depending on the individual molecular architectures, rigid building blocks self-assemble into a wide range of supramolecular structures such as honeycomb, disk, cylinder, helix, tube, barrel stave, and nano-cage.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.91-92
• /
• 2006

The fine-tuned dendrons provide unique supramolecular self-assemblies in various environments such as in water, organic media, and solid-liquid interfaces. They form nanotubes, vesicles, thin films, columns, lamellar nanoribbons depending on the condition of self-assembly process. Unique characteristics of self-assembly of the amide dendrons are described. In addition, elucidation of the structural correlation between the building blocks and the assemblies, stabilization of assembled structure, and transformation of supramolecular assemblies by using external stimuli. Particular emphasis is placed on the formation of cyclodextrin-covered organic nanotubes derived from self-assembly of amide dendrons and their supramolecular transformation. Finally, unique biosensory characteristics of the self-assembled nanotubes will be discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.1-10
• /
• 2018

In this paper, we propose the principles and design details of Automatic cable assembly test system and show its utility. Testing the cable assembly is required periodically or non-periodically in the system that the cable assembly performance is quite important like military equipment. There are several weaknesses when humans test the cable assembly manually. It not only takes much time but also could happen human error. To improve these disadvantages, I developed Automatic cable assembly test system. The system can be implemented by building switching control system that connect and disconnect the cable assembly and measuring devices. Through the result of the cable assembly test with this test system, we show this system makes test time short and improves of test reliability as compared with manual test.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.49.1-49.1
• /
• 2009

Ground Complex, which is located at Naro Space Center, consists of Assembly Complex(AC) and Launch Complex(LC) which is necessary for successful launch of KSLV-I(NARO). AC consists of Assembly/Testing Building(ATB), Payload Processing Building(PPB), Kick Motor Building(KMB). The purpose of AC is accepting of KSLV-I components, testing, checkout, assembly(disassembly) of the launch vehicle(LV), readiness for transferring LV to LC, accepting of integrated Launch Vehicle(ILV) in case of launch cancellation and short/long time storage, and so on. Qualification tests(QT) for the total system at AC are carried out to check hardware used for operations with first stage unit mockup, upper stage unit Mockup and integrated mockup(GTV). The qualification tests is carried out according to program and procedures of QT. By course of this process, AC is certificated that all the systems and facilities of AC are guaranteed by the fulfillment of technological operations envisioned in the program of qualification tests during the work with the mock-up.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.117-118
• /
• 2023

Estimating the construction period at the initial stage of the project and determining whether it is appropriate is very important for the developer's decision-making and the success of the construction company's business. Existing researchers have conducted various studies to calculate the appropriate construction period, but there is no study on the influencing factors and methodology for the construction period of beam-column PC apartment building frame construction. The purpose of this study is to calculate the PC member assembly time using the mathematical algorithm of PC member assembly. The results of this study can be used as basic data to calculate the construction date of the standard floor of PC construction.