• 복식문화연구
• /
• 제22권5호
• /
• pp.776-793
• /
• 2014

This study attempted to figure out the usage of the modular system in other fields through literature review and empirical study, analyze its structural method in fashion. After analyzing architecture & product-related books, the Internet data and previous studies, the modular system's five structural methods were obtained. Then, 991 photos of women's clothes from 2003 to 2014 were collected through the fashion websites in Korea and abroad. The results can be summarized as follows: First, the following five structures were derived: assembling structure, overlapping structure, arrangement structure, inserting structure and folding structure. Second, according to analysis on the structural method of the modular system in modern fashion, overlapping structure (34%) was the most common. Third, in fashion, the use of fastener for installation and removal is important for assembling structure. In terms of overlapping structure, 3D volume by vertical accumulation was commonly observed. Arrangement structure revealed a horizontal and flat shape through simple arrangement. In inserting structure, on the contrary, non-standardized modules were used as a part of clothes or decorative elements. In folding structure, origami technique for reduction and expansion was used.

• 보존과학연구
• /
• 통권24호
• /
• pp.61-79
• /
• 2003

The position of each part of the Ten storied pagoda of Gyeongcheonsa has been changed because of illegal dismantlement and assembling throughout the history. There remain carved letters in the part of pagoda, which let us know the incorrect assembling of the parts, however, we still don't know the reasons. The pagoda has been under conservation process by the conservators from Conservation Science Division in the National Research Institute of Cultural Properties. It is one of the main purposes to find an original structure of the pagoda by appropriate assembling. The existence of iconography and carved letters are very useful in the conservation process. Mis-assembled parts are mostly in the pedestal of the Chinese letter('아') and in the bodies up to third floor. The iconography of the pagoda has many similarities to the Ten storied pagoda of Wongaksaji.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 추계학술발표 개요집
• /
• pp.3-8
• /
• 1998

This paper considers factory simulation based on shipbuilding CIM in which a computer integrated design and manufacturing system is considered. The author proposes the product model and several alterative functions for designing ship's structure, and develop a ship definition system for computer integrated design and manufacturing. This implemented system is called SODAS (System Of Design and Assembly for Shipbuilding). Object oriented concept is used to develop this system. As well as the product model, the design function cutting function, and virtual assembling function are introduced. By using the design function, any type of ship's structure can be designed. And also factory simulation can be carried out by using the cutting function and virtual assembling function.

• Advances in aircraft and spacecraft science
• /
• 제2권3호
• /
• pp.233-248
• /
• 2015

Frame structures have been traditionally represented as an assembling of components, these last described within the beam theory framework. In the case of frames involving complex components in which classical beam theory could fail, 3D descriptions seem the only valid route for performing accurate enough analyses. In this work we propose a framework for frame structure analyses that proceeds by assembling the condensed parametric rigidity matrices associated with the elementary beams composing the beams involved in the frame structure. This approach allows a macroscopic analysis in which only the condensed degrees of freedom at the elementary beams interfaces are considered, while fine 3D parametric descriptions are retained for local analyses.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.276-281
• /
• 2008

Glass-fiber reinforced polyester(GFRP) composite material is a promising alternative to existing construction materials such as steel, concrete and wood. One of passible applications of GFRP composite material is to build temporary bridges by assembling GFRP composite decks. In this paper, we develop a system of temporary arch bridges that can be built by easy assembling of GFRP composite decks. For this purpose, several types of temporary arch bridges are suggested and verified by FE analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1410-1415
• /
• 2007

Recently introduced WBK(Wire-wounded Bulk Kagome) shows relatively superior mechanical properties compared to other types of PCM. WBK is fabricated by assembling helical wires in 6 directions. Wire being a helix, the wire's geometric properties like pitch and helical radius shows certain geometric characteristics which can play some critical role in setting up an automatic fabrication process. In this study, geometry of WBK is modeled by various transformations of a piece of helical wire and the characteristics of the geometry of an element of WBK truss are discussed. In addition, the roles of pitch and helical radius of wire in optimizing the assembling process are described and the derivation of criteria is attempted to decide proper helical radius which would maintain minimal interference between wires at the crossings.

• 한국농촌건축학회논문집
• /
• 제4권1호
• /
• pp.71-86
• /
• 2002

This research aims to illustrate the structure of the ancient Korean wooden buildings by a comparative study of the historical resources such as stone remains, wall paintings historiographies and excavations. As stone pagodas are the most typical stone remains, I selected for analysis some stone pagodas which contain architectural elements and results of the study are as follows: 1) The number of stories and structural modes of the base stone part show the wooden architectural aspects: they have one or two stories and their base part is constructed in the mode of assembling rectangular stones. 2) The body of the pagoda contains such architectural elements as pillars, door and windows, crossbeams, balcony, bracket sets. 3) The roof of the stone pagoda contains such architectural elements as eaves, roofs and modes of stone assembling. The results inferred through this research could be of help for further comparative studies with the other secondary materials by providing basic knowledge for it.

• 한국CDE학회논문집
• /
• 제2권2호
• /
• pp.93-102
• /
• 1997

Most design changes are due to interferences and fit-up as parts are assembled if such a large product as an automobile or an aircraft is developed by many concurrent engineers. In this part (1) of the thesis, the assembly-centric modeling methodology with CAD systems is proposed in order to reduce the design changes. Unlike part-centric modeling method, a part is modeled with its own coordinate system which is used in downstream process as machining and measuring. The part coordinates initially have the same orientation as its assembly which is predefined in BOM (Bill of Material). Then, the corrdinates origin of the part is moved to its location to be assembled from that of its assembly coordinate system. To implement this methodology, the position data of the part w.r.t. its assembly are stored in a database to build the same hierarchical assembling structure as BOM structure. This modeling approach has the advantage of reflecting asembling sequence, because the process of positioning parts is similar to that of real assembling. And with the method, a designer can easily adjust all of the part positions of an assembly to resolve interferences if he modifies just the coordinates origin of the assembly, which results in moving included parts and assemblies together.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.58-68
• /
• 2009

컴퓨터 하드웨어의 급격한 발전과 다양한 게임 기술의 발전으로 인해 게임 품질이 향상되고 게임 장르도 다변화 되었다. 이에 비해 퍼즐게임은 기존의 단순한 게임방식을 고수함으로 인해 점점 위축되고 있다. 따라서 본 연구는 현재 퍼즐게임의 한계를 벗어날 돌파구를 3차원 퍼즐게임에서 모색하려는 첫 시도이다. 3차원 퍼즐게임에서의 사실적인 퍼즐 조립을 표현하기 위해 조립에 적합한 구조물 처리 과정과 객체간의 정교한 충돌 방법, 물리구조를 활용한 3단계로 구성된 구조물 조립 기법을 설계하고 이를 통해 조립과정에서 연산 비용을 최소화하면서도 구조물 간의 정교한 퍼즐 조립이 가능함을 간단한 실험으로 보인다.

• Computers and Concrete
• /
• 제32권1호
• /
• pp.15-26
• /
• 2023

In order to study the anti-seismic performance of full light-weight concrete utility tunnel, EL Centro seismic waves were input, and the seismic simulation shaking table test was carried out on the four utility tunnel models. The dynamic characteristics and acceleration response of the system consisting of the utility tunnel structure and the soil, and the interlayer displacement response of the structure were analyzed. The influence law of different construction methods, haunch heights and concrete types on the dynamic response of the utility tunnel structure was studied. And the experimental results were compared with the finite element calculation results. The results indicated that with the increase of seismic wave intensity, the natural frequency of the utility tunnel structure system decreased and the damping ratio increased. The assembling composite construction method could be equivalent to replace the integral cast-in-place construction method. The haunch height of the assembling composite full light-weight concrete utility tunnel was increased from 30 mm to 50 mm to enhance the anti-seismic performance during large earthquakes. The anti-seismic performance of the full light-weight concrete utility tunnel was better than that of the ordinary concrete utility tunnel. The peak acceleration of the structure was reduced by 21.8% and the interlayer displacement was reduced by 45.8% by using full light-weight concrete. The finite element simulation results were in good agreement with the experimental results, which could provide reference for practical engineering design and application.