• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.67-72
• /
• 2019

This study compared the theory of a culvert spacing and analytical results of the seepage flow for the subsurface drainage. i) If culvert spacing (Sc) is within 5 m, the unit drainage (q) is very larger; in contrast, if Sc is 5 m or more, there is very little drainage in the middle between drains. Therefore, the drain spacing should be within 5 m to ensure high drainage efficiency. ii) Since the planned culvert drainage increases linearly with the soil's permeability coefficient (k), k must be taken into account when determining the drain diameter by the planned culvert drainage. iii) As a result of analyzing the drainage performance of the absorbing culvert, the drainage performance is sufficient with the diameter of the corrugated drain pipe Dc = 50 mm at the length of the drain Lc = 100 m. iv) Therefore, if the drain spacing (Sc) is less than 5 m using the low-cost non-excavated drainage pipe method (${\Phi}50mm$ the corrugated drain pipe and fiber mat) rather than the conventional trench drain method (Sc > 10 m, Dc > 100 mm), uniform and high drainage efficiency can be ensured as well as low construction cost. v) The sub-irrigation+drainage culvert requires narrower drain spacing (Sc < 2-3 m) for irrigation. As a result of examining the condition of 35 mm in diameter (Dc) and 2~3 m in drain spacing, it is possible to apply the non-excavated drainage pipe method to the sub-irrigation+drainage culvert because drainage performance is sufficient at the drain length Lc = 50 m.

• Journal of Distribution Science
• /
• v.20 no.5
• /
• pp.105-117
• /
• 2022

Purpose: This research investigates ready-to-drink (RTD) coffee. Although the RTD coffee market is growing competitively, few studies have examined behavioral re-intention or repurchase intention in the context of this industry. Therefore, the objective of this study was to explore factors affecting the behavioral re-intention to purchase RTD coffee. Research design, data and methodology: Using the theory of planned behavior (TPB) as the underpinning theoretical framework, this study hypothesized that behavioral re-intention to purchase RTD coffee is influenced by the variables of the TPB and additional variables. A mixed-method research design was applied, starting with qualitative in-depth interviews and followed by a quantitative method. Data were collected using an online survey of coffee lovers. Multiple linear regression (MLR) was used to assess the hypothesized relationships in the proposed conceptual framework. Results: The results reveal that content sensory attribute beliefs are the strongest positive predictor of behavioral re-intention in Thailand, followed by perceived utilitarian value. In contrast, price signaling was negatively related to behavioral re-intention. Conclusions: The findings can help food and beverage companies to develop new coffee product lines to gain more market share, create integrated marketing communications to build brand awareness, and manage distribution channels and the supply chain.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.217-226
• /
• 2006

Grasping and manipulation by hands can be considered as one of inevitable functions to achieve the performances desired in humanoid operations. When a humanoid robot manipulates an object by his hands, each finger should be well-controlled to accomplish a precise manipulation of the object grasped. So, the trajectory of each joint required for a precise finger motion is fundamentally necessary to be planned stably. In this sense, this paper proposes an effective joint motion planning method for humanoid fingers. The proposed method newly employs a bio-mimetic concept for joint motion planning. A suitable model that describes an interphalangeal coordination in a human finger is suggested and incorporated into the proposed joint motion planning method. The feature of the proposed method is illustrated by simulation results. As a result, the proposed method is useful for a facilitative finger motion. It can be applied to improve the control performance of humanoid fingers or prosthetic fingers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.36-44
• /
• 2000

In this paper drill shape and cutting conditions for environmentally conscious dry drilling of A319 Al-alloy are studied by experimental method. The experiment is planned with Taguchi's method that is based on the orthogonal array of design factors. The result is summarized as follows (1) Drill geometry optimization can increase the number of holes in dry drilling and also large helix angle and large point angle are desirable in dry drilling. (2) It is found that cutting conditions that is cutting speed and feed rate are closely related to the drill geometry(3) For dry drilling of Al-alloys drill shape and cutting conditions are selected and tested by experimental method. But it is found that the perfect dry drilling is difficult because of the machining characteristics of Al-alloys and so new machining method such as minimal lubricant application is required.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.254-261
• /
• 2009

This study suggested that the table of CT-simulator and the laser alignment system using diagnostic CT scanner have an efficient method for improvement in alignment between the planned target center of traverse image with CT scanner. It was conducted on the daily QA when presented in the AAPM TG66 with correcting the laser alignment system using geometric trigonometric functions and investigated the effectiveness of correction methods as compared with those before and after correction. Before correction error was 3.82mm between the planned target center of image, the table longitudinal axis was twisted with 0.436o. The laser alignment system using geometric trigonometric functions in after correction was satisfied with tolerance limits of ${\pm}2mm$ when occurred about 0.7mm in errors between the planned target center. The table correction to satisfy the geometric accuracy is very inefficient over against the time and economic loss as well as technical limits in the case of application as only radiation therapy associated with CT-simulator with diagnostic CT scanner in use. But, the method which corrects the laser alignment system is economic and relatively simple with possibility of getting well geometric accuracy and we suppose that it is efficient method for applying in the clinic.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.3
• /
• pp.289-296
• /
• 2022

Objectives: Integrating retail and manufacturing enables limitless potential for food businesses, but also creates challenges for navigating within complex food safety regulations. From public health inspectors' (PHIs) perspective, this study aimed (1) to describe the characteristics of crossover businesses in Louisiana, and (2) to evaluate regulation awareness and food safety education needs for business owners and PHIs who inspect crossover businesses. Methods: A self-administered questionnaire was administered to Louisiana Department of Health PHIs using Qualtrics^®. A descriptive analysis was performed, focusing on the frequency of each item. Results: In total, 1774 retailers were conducting or planned to conduct specialized processes, while 552 food manufacturers were performing or planned to perform retail functions. Reduced oxygen packaging, the use of additives such as vinegar as a method of preservation, and smoking food as a method of preservation were observed by 62%, 36%, and 35% of the PHIs, respectively. The PHIs perceived crossover businesses as "not aware" or "somewhat aware" of the food safety regulations. The current food safety training level for these businesses was reported to range from "no training" to "some training but not sufficient." When asked for a self-assessment, the majority of PHIs reported themselves as being "familiar" with the variance requirement for specialized processing. Their confidence in inspecting crossover businesses, however, leaned towards "not confident" or "somewhat confident." Conclusions: To better guard public health, food safety training is needed for crossover food business owners, as well as PHIs, on regulations and conducting or inspecting specialized processes.

• Korean Security Journal
• /
• no.43
• /
• pp.99-120
• /
• 2015

This research aimed at analyzing health behavior of private security guards applying planned behavioral theory. In order to achieve the above purpose, this research conducted purposive sampling on the security guards who live in Seoul Gyeonggi region. Excluding unfaithful response and abnormal outlier, material of 187 persons was used for analysis. As the concrete analysis method, multiple regression analysis and logistic regression analysis to presume exploratory factory analysis(EFA), Polyserial Exploratory Factor Analysis(EFA), Polyserial correlation analysis, and causal relationship between each variable. The result can be summarized as follows. First, attachment, attitude subjective standard on behavior, perceived behavioral control appeared to positively influence affirmative(+) effect on health behavior continuance will. Second, attachment had no meaningful influence attitude toward behavior. Third, attachment had affirmative(+) influence on health behavior continuance will. Fourth, perceived behavioral control had affirmative(+) influence on realization of health behavior, possibility of practising health behavior increased by about 62.9% when perceived behavioral control increased by 1 unit.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.1-15
• /
• 2021

The purposes of this study was to investigate the effects of materialism value on the clothing shopping orientation and impulse buying behaviors of Chinese female consumers. The subjects were 417 female millennials in Gillim-province, China. The research method was a survey, and the questionnaire consisted of questions to ascertain materialism value, clothing shopping orientation, impulse buying behaviors, and the subjects' demographic characteristics. For data analysis, descriptive statistics, Cronbach's α, factor analysis, and regression analysis were performed. The results of this study were as follows: First, materialism value was derived with 3 factors (happiness pursuit, possession-oriented, and success judgement). Second, the clothing shopping orientation was derived with 5 factors (trend pursuit, pleasure pursuit, brand pursuit, economic pursuit, and convenience pursuit). Third, the impulse buying behavior was derived with 4 factors (pure, planned, reminder, and implicit impulse buying). Forth, materialism value had significant effects on clothing shopping orientation. The higher the value of materialism, the more the brand pursuit, pleasure pursuit, and trend pursuit shopping orientation increased, while the economic pursuit and convenience pursuit shopping orientation decreased. Fifth, materialism value had significant effect on pure and planned impulse buying behaviors. As the value of materialism increased, pure and planned impulsive buying behaviors increased. This study suggested that materialism value is an effective variable to understand the clothing shopping orientation and clothing impulse buying behavior.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.17-26
• /
• 2022

Purpose: The purpose of this study is to classify space types according to the operating system of health examination centers and compare and analyze their sizes. Methods: Seven examination centers under the K Medical Research Institute with the same operating system and similar examination types and functional spaces are the subject of the investigation. Research is conducted through field investigation, user surveys, and drawing analysis. Results: The operating method of the health examination center can be largely divided into the function dispersed type and the function central type. The function dispersed type was planned as a vertical type, and the function central type was planned as a horizontal type. In the case of the function dispersed type, since the examinees move vertically to use the endoscope center and special examination center, the efficiency of the vertical movement must be considered when planning the function dispersed type of facility. The function dispersed type plans to increase work and manpower efficiency by arranging the areas used at the start and end of the examination. Because the function central type horizontally arranges related functions by area, it should be planned in a structure that makes it easy for examinees to find their way. Implications: Through this study, it is judged that it is possible to suggest architectural planning considerations that vary depending on the operation system of the examination center.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.105-114
• /
• 2011

The roadmap-based planning is a path planning method which is used widely for a goal-directed movement in Robotics and has been applied to the world of computer animation such as computer games. However it is unnatural for computer characters to follow the path planned by the roadmap method as it is performed in Robotics. Flocking which is used for realistic and natural movements in computer animation enables character's movement by using a few simple rules without planning unlike the roadmap method. However it is impossible to achieve a goal-directed movement with flocking only because it does not keep states. In this paper we propose a simulation method which combines planning based on the road map with reactive actions for natural movements along the path planned. We define and implement steering behaviors for a leader which are needed to follow the trajectory naturally by analysing characteristics of roadmap-based paths and for the rest of members which follow the leader in various manners by detecting obstacles. The simulations are performed and demonstrated by using the implemented steering behaviors on every possible combination of roadmap-based path planning methods and models of configuration spaces. We also show that the detection of obstacle-collisions can be done effectively because paths are planned in the configuration space in which a moving object is reduced to a point.